K4F6E3S4HM-THCL02V - 16Gb LPDDR4 SDRAM FBGA-200 | Samsung
MPN: K4F6E3S4HM-THCL02V ✓ فعالK4F6E3S4HM-THCL02V جائزہ
An LPDDR4 (Low-Power Double Data Rate 4) SDRAM is a JEDEC-defined volatile memory standard optimized for mobile and embedded applications where bandwidth density and energy per bit matter. LPDDR4 SDRAM sits inside the broader taxonomy of DRAM -> volatile memory -> memory IC -> semiconductor. Compared to LPDDR3, it doubles peak data rates, halves the I/O voltage (1.1V VDDQ), and introduces a 16n-prefetch architecture. LPDDR4X (the closest variant in this family) further lowers I/O voltage to 0.6V for additional power savings.
Key features of the K4F6E3S4HM-THCL02V include 4266 Mbps per-pin data rate, x32 organization (16Gb density), industrial-grade -40C to +105C operating temperature, and an ultra-thin FBGA-200 footprint tuned for sub-1.0mm stacked-package-on-package (PoP) and discrete mobile mainboard routing. The device supports both single-channel and dual-channel SoC interfaces, command-based training via MR (mode register) writes, and per-byte write leveling.
Technically, this LPDDR4 uses a 16n prefetch architecture with eight internal banks per channel, programmable CAS latency, and on-die temperature sensing. The 4266 Mbps speed grade corresponds to a clock rate of 2133 MHz DDR. The wide operating range makes it suitable for automotive infotainment and industrial HMI where thermal margins exceed commercial-grade DRAM envelopes.
Typical applications include flagship Android smartphones, AR/VR headsets, AI edge inference modules, automotive infotainment, and ultra-thin notebooks. Its 4266 Mbps bandwidth supports multi-camera ISP pipelines and on-device neural network inference with low DRAM power.
Design tip: route the LPDDR4 channel as a 100-ohm differential matched-length group, place the device within 3 mm of the SoC to control fly-by impedance, and add a 100 nF + 1 uF decoupling set near each VDD1/VDD2/VDDQ ball. Ensure the SoC supports the JEDEC JESD209-4 LPDDR4 base specification for full timing compliance.
This page synthesizes distributor pricing, drop-in alternatives, and practical layout guidance not found in the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل K4F6E3S4HM-THCL02V — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
K4F6E3S4HM-THCL
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
K4F6E3S4HM-TFCL
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
K4F6E3S4HM-MGCL
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
HGD4F16S37H
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
K4F6E304HM-MHCL
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
K4F6E3S4HM-THCL02V زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| میموری ٹائپ | LPDDR4 SDRAM (mobile) |
| Density | 16 Gbit (16 Gb) |
| تنظیم | 512M x 32 |
| Maximum Data Rate | 4266 Mbps per pin |
| Clock Rate | 2133 MHz DDR |
| Supply Voltage VDD1 | 1.1 V |
| Supply Voltage VDD2 | 1.1 V |
| Supply Voltage VDDQ | 1.8 V |
| آپریٹنگ درجہ حرارت | -40C to +105C |
| پیکیج | FBGA-200 |
| ماؤنٹنگ ٹائپ | Surface Mount (BGA) |
| Prefetch | 16n |
| Internal Banks | 8 banks per channel |
| Interface Width | x32 (per channel) |
| RoHS اسٹیٹس | Compliant |
| JEDEC Standard | JESD209-4 (LPDDR4) |
K4F6E3S4HM-THCL02V fbga-200 پن کنفیگریشن گائیڈ
K4F6E3S4HM-THCL02V (fbga-200 پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں K4F6E3S4HM-THCL02V.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
K4F6E3S4HM-THCL02V کے لیے موزوں ہے 6 ایپلیکیشنs: Flagship Smartphone Main Memory, AR/VR Headset Memory Subsystem, Edge AI Inference Module, Automotive Infotainment Platform, Ultra-Thin Notebook Memory, IoT Edge Gateway with On-Device AI.
Flagship Smartphone Main Memory
The K4F6E3S4HM-THCL02V's 16Gb density and 4266 Mbps per-pin data rate provide enough bandwidth for flagship Android smartphones running multi-camera ISP, 4K HDR capture, and on-device AI workloads. Its 1.1V VDD1/VDD2 and 1.8V VDDQ supplies cut DRAM subsystem power by ~40% versus LPDDR4X peers when measured at the system SoC. Designers should route the channel within 3 mm of the SoC to control fly-by impedance and place 100nF + 1uF decoupling near each VDD ball for stable power delivery during burst refresh.
تجویز کردہ
AR/VR Headset Memory Subsystem
AR/VR headsets require high bandwidth for stereoscopic display rendering, SLAM, and eye-tracking pipelines. The K4F6E3S4HM-THCL02V's 4266 Mbps data rate supplies enough throughput for dual-eye 4K display buffers at 90Hz refresh while staying inside the thermal envelope of a head-mounted device. The -40C to +105C industrial temperature grade handles the elevated temperatures inside a sealed headset when SoCs are under sustained inference load. Its FBGA-200 footprint supports sub-1.0mm stacked PoP designs.
تجویز کردہ
Edge AI Inference Module
Edge AI accelerator cards for industrial machine vision need compact, low-power, high-bandwidth DRAM to hold model weights and activations. The K4F6E3S4HM-THCL02V delivers 17 GB/s peak bandwidth per channel (4266 Mbps x 32 / 8), which is enough for medium-sized CNN inference at 30 FPS. The 1.1V core supply minimizes power per gigabyte transferred, a key metric for fanless edge devices. Designers should route address/command as a 50-ohm single-ended group and DQ as a 100-ohm differential matched-length group.
تجویز کردہ
Automotive Infotainment Platform
Automotive infotainment head units run Android Automotive OS with multi-display rendering, rear-seat entertainment, and ADAS visualization. The K4F6E3S4HM-THCL02V's -40C to +105C industrial temperature grade covers automotive cabin thermal cycles, and its 4266 Mbps data rate supports dual 1080p display buffers plus surround-view camera stitching. The FBGA-200 footprint enables compact PCB layouts that fit behind the dashboard display. AEC-Q100 qualification is at the SoC level; this DRAM follows JEDEC JESD209-4 reliability.
تجویز کردہ
Ultra-Thin Notebook Memory
Ultra-thin notebooks require dense, low-power DRAM in compact form factors. The K4F6E3S4HM-THCL02V's 16Gb density in FBGA-200 enables 8GB or 16GB LPDDR4 configurations with minimal PCB area, ideal for sub-15mm-thick laptops. Its 1.1V/1.1V supply set extends battery life versus DDR4 SODIMM modules. The device can be stacked via Package-on-Package (PoP) directly atop the SoC to minimize board area. Designers should verify SoC support for LPDDR4 (not LPDDR4X) before integration.
تجویز کردہ
IoT Edge Gateway with On-Device AI
Industrial IoT gateways increasingly run on-device anomaly detection and predictive maintenance models. The K4F6E3S4HM-THCL02V supplies enough bandwidth to run small transformer models in parallel with rule-based control loops. Its 1.1V supply keeps gateway power budgets under 10W while providing 17 GB/s per-channel throughput. The -40C to +105C range covers outdoor enclosure temperatures at solar-powered sites. Stack on PoP atop the SoC for compact DIN-rail mountable designs.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا K4F6E3S4HM-THCL02V — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | K4F6E3S4HM-THCL | K4F6E3S4HM-TFCL | K4F6E3S4HM-MGCL | HGD4F16S37H | K4F6E304HM-MHCL |
|---|---|---|---|---|---|---|
| Brand | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics | HGCHIPS | Samsung Electronics |
| Package | FBGA-200 | FBGA-200 | FBGA-200 | FBGA-200 | FBGA-200 | FBGA-200 |
| Density | 16 Gb | 16 Gb | 16 Gb | 16 Gb | 16 Gb | 16 Gb |
| Organization | 512M x 32 | 512M x 32 | 512M x 32 | 512M x 32 | 512M x 32 | 512M x 32 |
| VDDQ Voltage | 1.8 V (LPDDR4) | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| RoHS Status | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
اہم امتیازی خصوصیات
- 4266 Mbps speed bin at 16Gb density in industrial temp grade (بمقابلہK4F6E3S4HM-TFCL)
- Samsung factory-qualified ordering code for OEM channels (بمقابلہHGD4F16S37H)
- Industrial -40C to +105C temperature grade for non-consumer applications (بمقابلہK4F6E304HM-MHCL)
ڈیزائن نوٹس
Route the LPDDR4 channel as a 100-ohm differential matched-length group with skew under 5 ps between DQ bytes. Place the K4F6E3S4HM-THCL02V within 3 mm of the host SoC to control fly-by impedance on the address/command bus. Use a 4-layer PCB minimum with continuous ground plane under the BGA escape region. Series-staggered vias for break-out reduce stub length and impedance discontinuities.
Provide separate decoupling for each voltage rail: 100 nF + 1 uF ceramic caps within 1 mm of each VDD1, VDD2, and VDDQ ball. Add a 10 uF bulk capacitor near the package. The 1.1V core rails (VDD1/VDD2) should have ferrite-bead isolation from the SoC's internal logic supply to avoid LPDDR4 burst-refresh noise coupling back to the SoC. VDDQ at 1.8V is the I/O supply and is more tolerant of switching noise.
Do not confuse LPDDR4 (1.8V VDDQ) with LPDDR4X (0.6V VDDQ). The K4F6E3S4HM-THCL02V is LPDDR4 with 1.8V VDDQ, not LPDDR4X. Connecting LPDDR4X signal levels to this part will damage it. Verify the host SoC supports JEDEC JESD209-4 LPDDR4 base specification, including MR initialization sequence, write leveling, and gate training, before integration.
The FBGA-200 package's bottom thermal pad is the primary heat dissipation path. Apply thermal vias in the PCB land pattern directly under the BGA, connecting to inner ground planes. At maximum sustained bandwidth (4266 Mbps read/write), DRAM self-heating is non-trivial; in sealed enclosures (AR/VR, edge gateways) verify junction-to-ambient at the SoC stack level. The -40C to +105C operating range refers to ambient; junction may run 10-15C higher under sustained load.
تعمیل کی معلومات
RoHS compliant per JLCPCB listing. Not AEC-Q100 qualified at the DRAM level (AEC-Q100 applies to the host SoC in automotive designs). Lead-free and halogen-free per Samsung LPDDR4 family compliance. JEDEC JESD209-4 base standard compliance.
