Texas Instruments

LM2202MX - 230 MHz Video Amplifier | Texas Instruments

MPN: LM2202MX ✗ اختتامِ زندگی
48 mA Vdss 20-SOIC Package
MOQ: 1 |

LM2202MX جائزہ

The Texas Instruments LM2202MX is a single-channel, standard-purpose video amplifier system with a 230 MHz -3 dB bandwidth, packaged in a 20-pin SOIC. It is intended for high-frequency monochrome and RGB color-monitor signal chains where broad video bandwidth is required. The device combines a video amplifier with associated gain and filtering functions in one integrated circuit, reducing the number of separate analog stages required in a video signal path.

A video amplifier is a specialized linear amplifier that preserves the amplitude, timing, and waveform characteristics of composite or component video signals. Within the wider signal-processing hierarchy, the LM2202MX belongs to the video amplifier and amplifier IC category, where it processes analog video signals before display encoding, raster generation, image capture, or other downstream video functions. Its 230 MHz bandwidth places it in the high-frequency class of analog video amplification rather than the audio-frequency amplifier category.

The LM2202MX provides one amplifier circuit and is identified as a standard general-purpose video amplifier. The manufacturer material identifies the device as a 230 MHz video amplifier system in a 20-SOIC package. The associated comparison information lists a supply current of 48 mA, while detailed limits for gain, input and output impedance, voltage gain, slew rate, noise, supply range, and control functions are not established by the manufacturer data available for this page.

This high-frequency architecture is particularly relevant to legacy RGB and monochrome display equipment, where source signals include transitions and timing information across a wide analog bandwidth. The 20-pin SOIC package provides a conventional surface-mount assembly option, but its relatively long leads require careful routing and adequate spacing from high-speed switching nodes. A complete board design should preserve the pin assignments and application topology shown in the manufacturer datasheet rather than infer connections from the package outline.

Typical uses include RGB monitor input cards, monochrome video display modules, video timing and sync-processing boards, industrial imaging interfaces, and retrofit or repair platforms that still use analog video. In these systems, the device can provide the wideband gain and conditioning required before a signal reaches a display controller or monitor input section. Its suitability for a particular video standard must be checked against the required bandwidth, signal levels, gain settings, and termination arrangement.

When laying out a circuit around the LM2202MX, keep high-speed video traces short, use a continuous reference plane, and maintain working clearances from clocks, switch-mode converters, and digital signals. Decoupling should follow the manufacturer recommendations, and unused amplifier inputs require the documented termination method rather than being left floating. These measures limit ringing, reduce susceptibility to coupling, and preserve the amplitude relationship between the source and the downstream video stage.

This product page combines the confirmed 230 MHz bandwidth, one-channel architecture, 20-SOIC package, source links, application context, and drop-in alternatives where verified compatibility exists. It also identifies missing electrical and environmental details instead of presenting unverified values as design data, helping engineers establish the correct manufacturer datasheet and application information before releasing a layout.

کے لیے ڈراپ اِن متبادل LM2202MX — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

LM2202MX زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Video amplifier system
Amplifier Circuit Count 1 circuit
Device Classification Standard general-purpose video amplifier
-3 dB Bandwidth 230 MHz
سپلائی کرنٹ 48 mA
Package Type 20-SOIC
Total Pin Count 20 pins
ماؤنٹنگ ٹائپ Surface mount
Primary Application High-resolution monochrome and RGB color monitor applications

LM2202MX 20-soic پن کنفیگریشن گائیڈ

LM2202MX (20-soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

LM2202MX کے لیے 20-soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM2202MX.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LM2202MX کے لیے موزوں ہے 6 ایپلیکیشنs: RGB Computer Monitor Input, Monochrome Monitor Signal Conditioning, Industrial Imaging Video Interface, Video Timing and Sync Processing, Legacy Monitor Repair and Replacement, Analog Video Distribution Stage.

📺

RGB Computer Monitor Input

The LM2202MX fits legacy RGB monitor input circuitry because it is identified as a standard video amplifier system with 230 MHz -3 dB bandwidth for RGB color-monitor applications. One amplifier channel can condition an incoming red, green, or blue video path before the signal reaches the monitor's display-processing electronics. The 20-SOIC package supports conventional surface-mount assembly, although a new design must also verify the required gain, signal amplitude, supply voltage, and termination values in the manufacturer datasheet. Because the confirmed bandwidth is broad but not associated with a modern pixel-clock specification, system timing, edge response, and overall channel bandwidth should be checked together.

🖥️

Monochrome Monitor Signal Conditioning

The LM2202MX is suitable for legacy monochrome display modules that require wideband analog amplification ahead of a monitor controller. Its confirmed 230 MHz -3 dB bandwidth provides ample margin for many video-frequency signals, while the single-circuit architecture allows separate channels to be used for red, green, and blue or for related timing and video paths. The implementation should follow the manufacturer's reference topology, preserve the intended termination, and avoid long PCB stubs that could create reflections at video frequencies. For repaired equipment, replacing the IC alone is insufficient unless the original resistor values, supply conditions, and output loading are also reproduced.

🏭

Industrial Imaging Video Interface

The LM2202MX can be used in an industrial analog-video interface when the source signals remain compatible with a 230 MHz wideband amplifier and the operating environment falls within the device's unconfirmed electrical ratings. The amplifier may condition monochrome or RGB analog video before conversion, capture, or display processing. Industrial suitability must not be inferred from bandwidth alone: supply tolerance, temperature range, electromagnetic susceptibility, availability, and product lifecycle must be reviewed. The SOIC layout should maintain a continuous ground plane and separate video traces from switching nodes, while the exact termination and gain network must follow the manufacturer application information.

⏱️

Video Timing and Sync Processing

The LM2202MX's 230 MHz bandwidth makes it applicable to selected high-speed analog timing or synchronization paths in legacy video equipment, subject to signal-level and gain verification. A single-channel device can process a horizontal or vertical timing signal when the rise time, amplitude, and bandwidth requirements fall within the complete datasheet specification set. Care is required around edges: very fast transitions can excite parasitic inductance, lead inductance, or capacitive loading even when the nominal video bandwidth is acceptable. Follow the manufacturer's pin configuration and recommended source and load impedances, and validate timing margin with the final cable, connector, and shielding configuration.

🔧

Legacy Monitor Repair and Replacement

The LM2202MX is well suited to maintaining or replicating a legacy monitor board that originally used the LM2202 in a 20-SOIC footprint. The confirmed 230 MHz -3 dB bandwidth, one-amplifier format, and general-purpose designation align with classic monochrome and RGB video circuitry. Replacement activity should include a pin-by-pin comparison with the original device, confirmation of supply conditions, and inspection of adjacent electrolytic capacitors and coupling networks, which can age faster than the IC. For long-term production, obtain lifecycle and lot information through the Request a Quote form before committing the part to a new design.

🌐

Analog Video Distribution Stage

The LM2202MX may serve as a conditioning element in a distributed analog-video path where broad bandwidth and a single dedicated amplifier channel are required. Its 230 MHz bandwidth can pass monochrome, RGB, or related high-frequency video waveforms when the source amplitude and gain requirements are compatible. Distribution networks introduce loading and cable losses that can alter amplitude and edge response, so each amplifier should use the manufacturer's documented source and termination arrangements. Keep branches short where possible, maintain return paths with a ground plane, and test reflections and overshoot at the connector with representative cable lengths before production use.

What is the LM2202MX?
The LM2202MX is a single-channel, standard-purpose video amplifier system rated for 230 MHz -3 dB bandwidth and supplied in a 20-SOIC package. Manufacturer-related component information identifies it as a 230 MHz video amplifier system for high-resolution monochrome and RGB color-monitor applications. Its function is to amplify and condition analog video signals within a display or video-processing signal chain.
What are the key specifications of LM2202MX that engineers should know?
The principal LM2202MX specifications are one amplifier circuit, 230 MHz -3 dB bandwidth, 48 mA supply current, and a 20-SOIC package. The device is categorized as a standard general-purpose video amplifier. These confirmed figures establish its basic bandwidth and integration level, but gain, slew rate, impedance, supply voltage, noise, and absolute operating ratings require the manufacturer datasheet before final circuit calculations.
Where can I download the LM2202MX datasheet PDF?
The LM2202MX datasheet can be accessed through the manufacturer-document mirror linked on this page and through the indexed datasheet listings for the device. The PDF includes the authoritative electrical characteristics, absolute maximum ratings, pin descriptions, and application information. Use the manufacturer datasheet for final design decisions because search snippets may omit voltage limits, gain details, temperature ranges, and test conditions.
Where can I find the LM2202MX pinout?
The LM2202MX pinout is found in the pin-configuration section of the manufacturer datasheet. The confirmed package is a 20-pin SOIC, but the individual terminal names and numbering are not exposed in the indexed manufacturer information available for this page. Use the datasheet pin-description table when assigning PCB nets and check the exposed package drawing before making footprint assumptions.
Is the LM2202MX suitable for RGB video?
The LM2202MX is explicitly intended for high-resolution monochrome and RGB color-monitor applications. Its 230 MHz -3 dB bandwidth makes it appropriate for wideband analog video conditioning in compatible legacy display systems. Suitability for a specific RGB resolution also depends on signal amplitude, gain, rise-time requirements, termination, and the bandwidth budget of the complete display path.
Where can I buy LM2202MX online?
Use the Request a Quote form on this page to request LM2202MX availability, lot requirements, and delivery scheduling. The LM2202MX is a legacy video amplifier and its lifecycle status should be checked before committing a new production design. Provide the required quantity, date code, packaging preference, and inspection requirements when requesting a quotation.
What is the price of LM2202MX?
The current commercial terms for LM2202MX should be obtained through the Request a Quote form on this page. Because legacy video amplifiers may be offered from different channels and quantities, a quote allows the requested quantity, date-code tolerance, packaging, and delivery conditions to be evaluated together. No static price figure should be used for an obsolete or long-tail procurement decision.
What is the lead time for LM2202MX?
The current lead time for LM2202MX should be confirmed through the Request a Quote form on this page. Availability can depend on the requested quantity, acceptable date code, and whether the order is for prototype maintenance or ongoing production. Provide the production forecast and required traceable conditions with the request to obtain an actionable schedule.
Is LM2202MX in stock?
LM2202MX stock status should be confirmed through the Request a Quote form on this page. Because the device is identified as obsolete within the available product information, inventory may be limited and date-code or traceability requirements can materially affect availability. State the required quantity and acceptable date-code window so the fulfillment team can identify the most suitable inventory.
What can replace LM2202MX?
A valid LM2202MX replacement must use the same 20-SOIC footprint, preserve the pin assignments, and provide comparable bandwidth and video-amplifier functionality. LM2202N is not a drop-in replacement because the available comparison identifies a 20-PDIP package. Confirm pin compatibility, voltage gain, supply range, bandwidth, slew rate, stability, and termination requirements against the manufacturer datasheet before approving any substitute.
Is the LM2202N a drop-in replacement for LM2202MX?
No, LM2202N is not a drop-in replacement for LM2202MX based on the available package information. LM2202MX uses a 20-SOIC package, while the LM2202N comparison lists a 20-PDIP package. Their different lead arrangements require different PCB footprints, and a through-hole replacement cannot be soldered directly onto the LM2202MX surface-mount land pattern.
LM2202MX vs LM2202N - which is better for an existing monitor board?
Choose LM2202MX when the existing PCB uses the 20-SOIC footprint and the required circuit uses a surface-mount video amplifier. Choose LM2202N only when the board has a compatible 20-PDIP footprint or can be redesigned. Both belong to the LM2202 family, but package interchangeability alone does not establish identical pin behavior, so verify the complete pin descriptions and electrical limits before selection.
When should I choose LM2202MX over a newer video amplifier?
Choose LM2202MX when maintaining an established 20-SOIC video board is more important than redesigning around a newer amplifier technology. Its confirmed 230 MHz bandwidth, single-channel format, and legacy display focus can simplify repair and replication. A newer device is preferable for a new design only when its bandwidth, gain, supply requirements, stability, availability, and lifecycle commitments fully satisfy the system requirements.
Is LM2202MX suitable for an industrial video interface?
The LM2202MX can be considered for an industrial analog video interface when the signal bandwidth and electrical characteristics remain within the legacy LM2202 specification set. The confirmed 230 MHz bandwidth is suitable for many wideband video paths, but industrial qualification details, supply range, temperature range, and long-term availability require confirmation. Use the Request a Quote form for lifecycle and sourcing support.
What is the best National Semiconductor equivalent for LM2202MX?
The same-family LM2202M designation is the closest documented device name in the available component records, and the indexed description associates the LM2202 family with 20-SOIC packaging and a 230 MHz video amplifier system. Final substitution still requires confirmation of every pin, electrical rating, and application condition. LM2202N is not equivalent from a PCB-footprint perspective because it is listed as a 20-PDIP part.
What design considerations matter for a 230 MHz video amplifier PCB?
A 230 MHz video amplifier PCB should use short controlled-impedance video traces, a continuous ground reference, careful decoupling, and adequate separation from switching and clock signals. Keep the manufacturer-recommended resistor and capacitor values close to their associated pins, terminate unused inputs as documented, and maintain the specified output loading. Layout changes that add long stubs or ground discontinuities can cause ringing and alter the intended gain response.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM2202MX — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM2202MX when repairing or replicating a legacy 20-SOIC video-amplifier board that requires a single general-purpose channel with 230 MHz -3 dB bandwidth. Its surface-mount package and confirmed application focus make it appropriate for monochrome and RGB monitor circuitry. Before committing, verify voltage gain, supply range, input and output impedance, slew rate, temperature limits, and the exact pin configuration in the manufacturer datasheet. LM2202N may serve the same broad video-amplifier function, but its 20-PDIP package prevents direct replacement on a 20-SOIC board. For a new design, favor a currently supported amplifier whose complete electrical characteristics match the signal standard and whose lifecycle status provides better continuity. This device is most appropriate when preserving an existing board, maintaining obsolete equipment, or qualifying a known-good legacy topology has priority over long-term supply assurance.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Package 20-SOIC
Brand Texas Instruments
Product Type Video amplifier system
Number of Circuits 1 circuit
-3 dB Bandwidth 230 MHz
Supply Current 48 mA
Device Classification Standard general purpose
Primary Application High-resolution monochrome and RGB color monitors
Mounting Type Surface mount
Product Status Obsolete

اہم امتیازی خصوصیات

  • Wide confirmed bandwidth for legacy analog video (بمقابلہLM2202N)
  • Single-channel general-purpose video amplification (بمقابلہLM2202N)
  • Direct fit for an existing 20-SOIC monitor-board footprint (بمقابلہLM2202N)

ڈیزائن نوٹس

Route the video path as a controlled, short trace over a continuous ground reference. The confirmed 230 MHz bandwidth makes trace geometry, return-path continuity, and nearby clock or converter switching nodes more important than they would be for a low-frequency amplifier. Keep the input and output loops compact, avoid vias in sensitive video nets when practical, and maintain the manufacturer's recommended separation from digital and switching circuitry to reduce ringing and coupling.

Reproduce the manufacturer application circuit without substituting undocumented termination or gain values. Place the associated resistors, capacitors, and any input or output bias networks close to the device pins to minimize parasitic inductance and capacitance. Unused amplifier inputs must follow the datasheet's prescribed bias or termination arrangement rather than being left floating. Confirm the 20-SOIC footprint dimensions against the manufacturer drawing before releasing copper artwork.

Validate the complete video channel with the intended source impedance, cable, connector, and output load. A nominal 230 MHz -3 dB bandwidth does not by itself guarantee acceptable pulse fidelity in every installation, especially when rise times are much shorter than the reciprocal of the stated bandwidth. Check amplitude, edge rate, overshoot, ringing, and channel-to-channel skew at the connector, and adjust only after confirming that the circuit still follows the manufacturer's electrical limits.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No explicit environmental, lead-free, halogen-free, conflict-minerals, or automotive qualification statements were identified in the available manufacturer-related records.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LM2202MX datasheet LM2202MX datasheet pdf LM2202MX pinout LM2202MX 230 MHz video amplifier LM2202MX 20-SOIC Texas Instruments LM2202MX LM2202MX equivalent LM2202MX replacement LM2202MX vs LM2202N LM2202MX RGB monitor amplifier LM2202MX application circuit LM2202MX price LM2202MX stock

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM2202MX LM2202N video amplifier system video amplifier amplifier IC analog video signal RGB color monitor monochrome monitor 230 MHz bandwidth -3 dB bandwidth single-channel amplifier standard-purpose video amplifier 20-SOIC SOIC package surface-mount package high-frequency video gain control source impedance output impedance signal integrity legacy display equipment obsolete component
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں