Texas Instruments

LM2902M/NOPB - 26V Quad 1.2MHz Op Amp | Texas Instruments

MPN: LM2902M/NOPB ✓ فعال
26 V Vdss 14-SOIC, 3.90 mm width Package Internally compensated Speed
MOQ: 1 |

LM2902M/NOPB جائزہ

The Texas Instruments LM2902M/NOPB is a four-circuit, general-purpose operational amplifier built for single- or dual-supply operation from a wide 26 V maximum supply. It provides approximately 1.2 MHz gain-bandwidth product, 2 mV input offset voltage, and 14-SOIC packaging, making it suitable for industrial control, instrumentation, sensor interfaces, and general analog signal conditioning. The device is supplied in a tube under the /NOPB ordering code.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902 belongs to the hierarchy of four-channel general-purpose amplifiers within the broader operational-amplifier and analog IC categories. Its four independent channels make it useful where several low-frequency signals must be amplified, buffered, summed, or compared within one package.

The principal features include four independent amplifiers, a 26 V maximum total supply rating, approximately 1.2 MHz gain-bandwidth product, and approximately 2 mV input offset voltage. Its general-purpose performance is suitable for sensor conditioning, current-loop interfaces, audio and communication circuits, and industrial control signals. The 14-SOIC package provides a conventional surface-mount footprint and easy access to separate inputs, outputs, and supply connections for all four channels.

Internally, the LM2902M/NOPB uses a frequency-compensated four-amplifier architecture intended for stable operation with conventional external feedback networks. A gain-bandwidth product near 1.2 MHz gives adequate bandwidth for low-frequency instrumentation and control loops without making the device a high-speed precision amplifier. The stated 2 mV offset specification supports general signal conditioning, although applications requiring tighter calibration accuracy may need offset correction or a more precise amplifier.

Typical uses include buffering sensor outputs, amplifying low-level analog signals, driving slow comparators, implementing transimpedance stages, and providing gain in industrial instrumentation. Because each channel has independent input and output pins, multiple circuit blocks can be consolidated while preserving separate ground-referenced or feedback networks. The wide supply capability is particularly useful in 12 V or 24 V industrial environments, subject to the device's maximum operating limits.

Designers should verify common-mode input range, output swing, input bias current, slew rate, and thermal conditions against the manufacturer datasheet before fixing a supply voltage or gain. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the datasheet rather than left floating. Input-source impedance should also be considered because excessive imbalance can create offset and bias-current errors.

This page combines the manufacturer's principal operating characteristics, package and ordering details, practical application guidance, and a focused set of same-footprint replacement options. It also adds design notes and comparison criteria that help engineers determine whether the LM2902M/NOPB is suitable for a given signal-conditioning or industrial-control design.

کے لیے ڈراپ اِن متبادل LM2902M/NOPB — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2902M/NOPB (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature Range, Amplifier Type, Input Offset Voltage, Maximum Supply Voltage.

Texas Instruments
Package: 14-pin SSOP (DB)
Operating Temperature Range: -40°C to +125°C
Amplifier Type: General-purpose operational amplifier
Texas Instruments
Package: 14-SO
Texas Instruments
Package: 14-pin TSSOP
Operating Temperature Range: -40 °C to +125 °C
Amplifier Type: General-purpose operational amplifier
Texas Instruments
Package: 14-pin SOIC (D)
Operating Temperature Range: -40°C to 125°C
Amplifier Type: Quad general-purpose operational amplifier
onsemi
Package: 14-pin SOP
Texas Instruments
Package: 14-SOIC
Input Offset Voltage: 2 mV typical
Texas Instruments
Package: 14-SO
Amplifier Type: General-purpose operational amplifier
Input Offset Voltage: 2 mV maximum

LM2902M

✅ ڈراپ-اِن
onsemi
📦 14-SOIC
Quad operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV · Standard general-purpose amplifier · Internal frequency compensation · 4 independent amplifiers

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902KPWR

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Texas Instruments
📦 14-SOIC
4 amplifiers · General-purpose operational amplifier · 26 V · 1.2 MHz · 2 kV · -40 °C to +125 °C · Single-supply operation · Internally frequency compensated

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902KDBR

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Texas Instruments
📦 14-SOIC
4 channels · General-purpose operational amplifier · 26 V · 1.2 MHz · 2 kV improved ESD · 3 mV · 2 nA · 0.8 mA

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902NSR

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Texas Instruments
📦 14-SOIC
General-purpose operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV maximum · 14-SO · 14 pins · Surface mount

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902M

✅ ڈراپ-اِن
onsemi
📦 14-SOIC
Quad operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV · Standard general-purpose amplifier · Internal frequency compensation · 4 independent amplifiers

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902M

✅ ڈراپ-اِن
onsemi
📦 14-SOIC
Quad operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV · Standard general-purpose amplifier · Internal frequency compensation · 4 independent amplifiers

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM2902M/NOPB زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Amplifiers 4 circuits
Amplifier Type General purpose
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 1.2 MHz
Input Offset Voltage 2 mV
پیکیج 14-SOIC, 3.90 mm width
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C
Slew Rate 0.5 V/µs
Datasheet Gain-Bandwidth Product 1 MHz
Packaging Tube
ماؤنٹنگ ٹائپ Surface mount
پنز کی تعداد 14 pins
Supply Configuration Single or dual supply
Frequency Compensation Internally compensated

LM2902M/NOPB پن کنفیگریشن

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پن 1 OUT1 — Amplifier 1 output
پن 2 -IN1 — Amplifier 1 inverting input
پن 3 +IN1 — Amplifier 1 non-inverting input
پن 4 V- — Negative supply or ground connection
پن 5 +IN2 — Amplifier 2 non-inverting input
پن 6 -IN2 — Amplifier 2 inverting input
پن 7 OUT2 — Amplifier 2 output
پن 8 OUT3 — Amplifier 3 output
پن 9 -IN3 — Amplifier 3 inverting input
پن 10 +IN3 — Amplifier 3 non-inverting input
پن 11 V+ — Positive supply connection
پن 12 +IN4 — Amplifier 4 non-inverting input
پن 13 -IN4 — Amplifier 4 inverting input
پن 14 OUT4 — Amplifier 4 output

عام استعمالات

LM2902M/NOPB کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Audio Preamplifier and Buffering, Transimpedance Amplifier, Current Loop Receiver, Power Supply Feedback and Monitoring, Portable and Battery-Powered Instrumentation.

🏭

Industrial Sensor Signal Conditioning

The LM2902M/NOPB fits industrial sensor interfaces that need several low-frequency amplification stages on one board. Its four independent channels can condition current or voltage sensor signals while sharing a 26 V maximum supply capability. The approximately 1.2 MHz gain-bandwidth product is suitable for general-purpose industrial signals rather than high-bandwidth waveform capture. A 12 V or 24 V industrial rail also provides useful headroom when designing noninverting or inverting amplifiers. Designers should confirm common-mode input range, output swing, and input bias current in the Texas Instruments LM2902 datasheet before setting the gain.

🎧

Audio Preamplifier and Buffering

The LM2902M/NOPB can provide low-frequency gain and buffering for audio preamplifier stages that do not require rail-to-rail operation. Its four amplifier channels allow balanced input buffering, volume-control gain stages, or active filtering to be implemented in a compact 14-SOIC package. The 2 mV input offset figure is adequate for many general audio paths, while the approximately 1.2 MHz bandwidth supports modest-bandwidth tonal signals. Supply selection must preserve adequate output swing and common-mode range. Feedback-network values and decoupling placement should follow the manufacturer's application guidance.

🧩

Transimpedance Amplifier

The LM2902M/NOPB is appropriate for modest-bandwidth photodiode or sensor-current-to-voltage conversion because it provides four internally compensated amplifier channels and approximately 1.2 MHz gain-bandwidth product. The feedback resistor and compensation capacitor determine practical sensitivity, bandwidth, and stability, so the circuit should be simulated with the actual photodiode capacitance and load. The 2 mV offset specification provides a baseline for many non-precision light-control loops. Input bias current, common-mode limits, and output swing must be checked against the operating point.

⚡

Current Loop Receiver

The LM2902M/NOPB is well suited to receiving 4-20 mA industrial current-loop signals because four channels can support buffering, scaling, filtering, and comparison within one package. Its 26 V maximum supply accommodates industrial environments better than a low-voltage precision amplifier, while the approximately 1.2 MHz bandwidth is more than adequate for typical process-control loops. Use an input resistor to convert the loop current into a voltage and confirm that the resulting voltage remains within the amplifier's common-mode range. Include input protection when the field wiring is exposed to transients.

🖥️

Power Supply Feedback and Monitoring

The LM2902M/NOPB can monitor and buffer multiple power-related voltages in industrial or communications equipment. Its four channels may compare a scaled rail against a reference, provide buffered fault signals, or amplify differential sensing lines. The wide 26 V maximum supply is useful around 12 V and 24 V rails, although the amplifier itself is not a dedicated voltage-reference or protection device. Check that the sensed voltage remains inside the input common-mode range and that the output does not exceed the selected load capability. Place supply-bypass capacitors close to pins 4 and 11.

📱

Portable and Battery-Powered Instrumentation

The LM2902M/NOPB can consolidate low-speed analog channels in battery-powered instrumentation where four separate amplifiers would otherwise increase board area. Its low-power general-purpose architecture is useful for sensor interfaces, threshold amplifiers, and modest-gain stages, although quiescent current should be compared with the system's energy budget. The broad supply range permits operation from several common rail arrangements, subject to the exact input and output limits. Power-gating, shutdown behavior, and the input bias current of the selected amplifier are important checks for portable equipment.

What is the LM2902M/NOPB?
The LM2902M/NOPB is a Texas Instruments quad general-purpose operational amplifier with four independent amplifiers, a 26 V maximum supply rating, approximately 1.2 MHz gain-bandwidth product, and 2 mV input offset voltage. According to the Texas Instruments LM2902 datasheet, it is packaged in 14-SOIC and is intended for general-purpose industrial and instrumentation signal-conditioning applications.
What are the key specifications of LM2902M/NOPB that engineers should know?
The LM2902M/NOPB combines four independent general-purpose amplifiers, a 26 V maximum supply voltage, approximately 1.2 MHz gain-bandwidth product, and approximately 2 mV input offset voltage in a 14-SOIC package. The Texas Instruments LM2902 datasheet also identifies an operating range of -40 °C to +85 °C and a tube package configuration for this ordering code.
What is the operating voltage of LM2902M/NOPB?
The LM2902M/NOPB is specified for operation with a total supply voltage up to 26 V. According to the Texas Instruments LM2902 datasheet, it can be used in single-supply or dual-supply arrangements. The exact input and output limits should be checked against the datasheet's common-mode and output-swing limits before selecting a supply voltage.
Where can I download the LM2902M/NOPB datasheet PDF?
The official LM2902M/NOPB documentation is available through Texas Instruments' LM2902 product page, which links to the manufacturer datasheet and ordering information. The product is identified as a 14-SOIC quad operational amplifier. Use the pin configuration and electrical characteristics from the manufacturer datasheet when creating a schematic or PCB footprint.
Where can I find the LM2902M/NOPB pinout?
The LM2902M/NOPB uses a 14-SOIC pin arrangement with four complete amplifier channels, positive and negative supply pins, and one exposed-package thermal pad. The Texas Instruments LM2902 datasheet pin table should be used as the authoritative assignment for PCB routing. Each channel retains separate input, output, and feedback connections.
Is LM2902M/NOPB suitable for industrial control applications?
Yes, the LM2902M/NOPB is suitable for many industrial control and instrumentation applications because it provides four amplifiers, a 26 V maximum supply rating, and a -40 °C to +85 °C operating range. According to the Texas Instruments LM2902 datasheet, its bandwidth is suitable for general-purpose low-frequency control and signal-conditioning circuits rather than high-speed precision measurement.
Can the LM2902M/NOPB operate from a single 5 V supply?
The LM2902M/NOPB supports single-supply operation, making a 5 V rail suitable for many conventional signal-conditioning circuits. According to the Texas Instruments LM2902 datasheet, the device contains four internally compensated amplifiers for single- or dual-supply use. Confirm the output swing and input common-mode limits for the selected supply before relying on rail-to-rail input or output behavior.
What can replace the LM2902M/NOPB?
The closest replacements are four-channel operational amplifiers in the same 14-SOIC footprint with comparable supply, bandwidth, and offset ratings. TI's LM2902M and LM2902M/NOPB variants share the same base device designation, while the listed onsemi and Panasonic LM2902M parts provide cross-brand options. Confirm input bias current, common-mode range, slew rate, and output swing before substituting a part.
Is LM2902M/NOPB the same as LM2902M?
LM2902M/NOPB identifies the Texas Instruments LM2902M device with the /NOPB ordering suffix, while LM2902M is the base manufacturer part number. The distributor listing identifies both in 14-SOIC packaging. The /NOPB ordering code denotes the specified tube-packaging configuration for this product entry.
What is the best onsemi equivalent for LM2902M/NOPB?
The onsemi LM2902M is the most directly supported cross-brand candidate because the cross-reference results identify it as a four-channel general-purpose amplifier in a 14-SOP package. It is a 14-SOIC-class drop-in candidate for LM2902M/NOPB, but engineers should compare the manufacturer datasheets for exact common-mode range, bias current, offset limits, and output-drive specifications before production use.
LM2902M/NOPB vs LM2902KPWR: which is better for a 14-SOIC design?
Both parts place four general-purpose amplifiers in a 14-SOIC package, so the decision depends on the detailed ordering, temperature, and parameter requirements. The LM2902M/NOPB is identified specifically as the tube-packaged LM2902M, while LM2902KPWR is another site-listed orderable variant. Compare the exact Texas Instruments ordering table and datasheet limits rather than treating every suffix as electrically identical.
When should I choose LM2902M/NOPB over another LM2902 variant?
Choose LM2902M/NOPB when a four-channel, 14-SOIC general-purpose amplifier is required and the tube-packaged /NOPB ordering designation is appropriate for the BOM. The device offers approximately 1.2 MHz gain-bandwidth product and 2 mV offset voltage. For specialized grade, temperature, or lead-free ordering requirements, verify the exact suffix and qualification status in the manufacturer ordering information.
Where to buy LM2902M/NOPB online?
Use the Request a Quote form on this XAIPART page to request LM2902M/NOPB availability, package details, and a current quotation. The exact ordering code is listed in distributor search results as a Texas Instruments 14-SOIC, four-circuit general-purpose amplifier supplied in a tube. A manufacturer-authorized quotation process helps confirm current lifecycle and quantity availability.
What is the price of LM2902M/NOPB?
The current commercial price for LM2902M/NOPB should be requested through the Request a Quote form on this page because pricing and inventory can change with quantity and market conditions. The manufacturer ordering code identifies a four-circuit, 14-SOIC general-purpose amplifier. Provide the required quantity and tube-packaging requirement when submitting the request.
What is the lead time and stock status for LM2902M/NOPB?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. Texas Instruments lists LM2902M/NOPB as the orderable /NOPB version of the LM2902M device in 14-SOIC packaging. Supply status should be confirmed for the exact suffix because standard and extended-temperature order codes can have different availability.
What design constraints matter when using LM2902M/NOPB?
The main constraints are supply headroom, common-mode range, output swing, input bias current, and stability with the selected feedback network. The LM2902M/NOPB is a frequency-compensensed general-purpose amplifier rather than a rail-to-rail precision device. Follow the Texas Instruments LM2902 datasheet for decoupling, input capacitance, output loading, and unused-channel guidance.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM2902M/NOPB — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM2902M/NOPB when a design needs four general-purpose amplifiers in a 14-SOIC footprint, a supply rating up to 26 V, approximately 1.2 MHz gain-bandwidth product, and operation from -40 °C to +85 °C. It is well suited to industrial sensor conditioning, current-loop receivers, buffering, and general low-frequency control circuits. Select LM2902M when the base TI ordering code is preferable to the tube-packaged /NOPB designation. The LM2902KPWR, LM2902KDBR, and LM2902NSR alternatives share the same family and footprint, but their ordering, temperature, qualification, and packing details must be checked before substitution. The onsemi LM2902M is a close cross-brand candidate with a listed 1 MHz gain-bandwidth product, while Panasonic's LM2902M requires especially careful review of detailed electrical limits. For precision offset, rail-to-rail input, low bias current, or high-speed applications, choose a more specialized amplifier rather than relying on package compatibility alone.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM2902M LM2902KPWR LM2902KDBR LM2902NSR LM2902M LM2902M
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi Panasonic
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Number of Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Amplifier Type General purpose General purpose General purpose General purpose General purpose General purpose General purpose

اہم امتیازی خصوصیات

  • Four independent amplifiers in one conventional 14-SOIC package (بمقابلہLM2902KPWR)
  • Higher stated gain-bandwidth product (بمقابلہonsemi LM2902M)
  • Direct TI LM2902 family sourcing path (بمقابلہPanasonic LM2902M)

ڈیزائن نوٹس

Place the supply-bypass capacitor as close as practical to pins 4 and 11, and route the supply and ground returns without narrow breaks between layers. Because this is a four-amplifier device, total supply current rises with the number of active channels. Use the datasheet's quiescent-current and output-current limits to size the supply, and avoid treating the maximum 26 V rating as a recommended operating point.

Do not assume rail-to-rail input or output behavior. Verify the common-mode input range and output swing at the selected supply voltage, particularly in single-supply sensor circuits where the signal sits near ground. The 2 mV offset rating is suitable for general-purpose conditioning, but precision measurements may require offset trimming or a more accurate amplifier.

Route each amplifier's input and feedback paths compactly and keep high-impedance input nodes away from output and supply traces. The 14-SOIC footprint has sufficient pin spacing for conventional routing, but adjacent channels can share ground infrastructure. Confirm exposed-pad thermal and copper recommendations in the manufacturer package drawing before finalizing the land pattern.

Choose feedback resistors and compensation capacitors to maintain stable closed-loop behavior with the actual source impedance and load capacitance. Input bias-current error becomes more visible with high source resistance and a 2 mV offset specification is only a general-purpose baseline. For photodiode, capacitive sensor, or long-cable interfaces, simulate the complete source network rather than relying only on nominal gain-bandwidth product.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Compliance claims require confirmation for the exact /NOPB ordering code. The /NOPB suffix identifies lead-free ordering, but no explicit RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification statement was confirmed.

متعلقہ تلاشیں

lm2902m nopb lm2902m datasheet lm2902m datasheet pdf LM2902M/NOPB datasheet pdf LM2902M/NOPB pinout LM2902M/NOPB specifications LM2902M/NOPB equivalent LM2902M/NOPB replacement LM2902M/NOPB vs LM2902KPWR Texas Instruments LM2902M/NOPB LM2902M/NOPB 14-SOIC amplifier LM2902M/NOPB industrial signal conditioning LM2902M/NOPB price LM2902M/NOPB stock

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM2902M/NOPB LM2902M LM2902KPWR LM2902KDBR LM2902NSR onsemi Panasonic operational amplifier op amp quad amplifier general-purpose amplifier analog integrated circuit signal conditioning single-supply operation dual-supply operation gain-bandwidth product input offset voltage common-mode voltage slew rate 14-SOIC SOIC package family surface mount industrial instrumentation current-loop receiver
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں