Texas Instruments

LM2903BIDSGR - Dual 38V Comparator | Texas Instruments

MPN: LM2903BIDSGR ✓ فعال
38 V Vdss 3.5 nA Id 8-WSON, 2 x 2 mm Package
MOQ: 1 |

LM2903BIDSGR جائزہ

Texas Instruments LM2903BIDSGR is a dual differential analog comparator with a maximum rating of 38 V, open-collector outputs, and an 8-WSON package measuring 2 x 2 mm. Each channel supports rail-to-rail input behavior, while the device uses 200 uA of supply current per comparator and has a typical response time of 1 us. The B-version combines low power consumption with improved switching performance.

An analog comparator is a semiconductor that compares two input voltages and produces a logic-level output indicating which input is higher. Comparators belong to the broader analog IC hierarchy alongside amplifiers, voltage references, and data converters. They are used to implement threshold detection, sensing, overvoltage protection, oscillator functions, and digital-interface conditioning when open-collector outputs are advantageous.

The LM2903B family provides a maximum input rating of 38 V, an input offset voltage as low as 0.37 mV, and an input bias current as low as 3.5 nA. Its open-collector output stages can sink output current and support pull-up connections to the system supply, allowing the device to interface with TTL, MOS, and CMOS logic. Dedicated input ESD clamps provide an HBM ESD rating of 2 kV.

The B-version improves the original LM2903 family through lower offset voltage, lower input bias current, lower supply current, faster response, wider supply capability, and improved input ruggedness. Its common-mode input voltage range includes ground, which supports sensing around a zero-volt reference when the supply conditions permit operation near that boundary. The 1 us response time also makes the device suitable for faster control loops than classic general-purpose comparators.

Typical uses include DC overvoltage and undervoltage detection, sensor threshold interfaces, battery and power-supply monitoring, window comparators, relaxation oscillators, and industrial control logic interfaces. The compact 2 x 2 mm WSON package helps reduce board area where dense analog and mixed-signal layouts are required.

Designers should preserve adequate input and output separation when operating near absolute maximum limits, place pull-up resistors close to each open-collector output, and route sensitive input traces away from switching nodes. The exposed thermal pad should be connected to the ground plane according to the package land pattern and thermal design guidance.

This page combines the LM2903BIDSGR electrical characteristics, package and lifecycle information, replacement assessment, comparison data, and practical PCB guidance to help engineers evaluate the device quickly and design a robust comparator circuit.

کے لیے ڈراپ اِن متبادل LM2903BIDSGR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

LM2903BIDSGR زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Comparator Type Dual differential comparator
Number of Channels 2 channels
Maximum Voltage Rating 38 V
Differential Input Voltage Range -38 V to +38 V
Common-Mode Input Voltage Range Includes ground
Input Offset Voltage 0.37 mV
Input Bias Current 3.5 nA
سپلائی کرنٹ 200 uA per comparator
Response Time 1 us
ESD Rating 2 kV HBM
آؤٹ پٹ کی قسم Open collector
Input Common-Mode Behavior Rail-to-rail
Logic Compatibility Compatible with TTL, MOS, and CMOS
پیکیج 8-WSON, 2 x 2 mm
پن کی تعداد 8 pins
ماؤنٹنگ ٹائپ Surface mount
Industrial Grade Yes

LM2903BIDSGR 8-wson, 2 x 2 mm پن کنفیگریشن گائیڈ

LM2903BIDSGR (8-wson, 2 x 2 mm پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

LM2903BIDSGR کے لیے 8-wson, 2 x 2 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM2903BIDSGR.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

LM2903BIDSGR کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Overvoltage Protection, Battery Voltage Monitoring, Sensor Threshold Interface, Window Voltage Comparator, Relaxation Oscillator, Digital Control Signal Conditioning.

🏭

Industrial Overvoltage Protection

The LM2903BIDSGR fits overvoltage supervision because each comparator can evaluate a divided feedback voltage against a reference and pull an open-collector output low when the monitored rail exceeds its threshold. Its 38 V maximum rating provides headroom for industrial supply transients, while the 0.37 mV input offset helps reduce threshold error. The 1 us response time permits rapid shutdown signaling. Add a pull-up resistor to the system logic supply and account for propagation delay in the protection sequence.

⚡

Battery Voltage Monitoring

LM2903BIDSGR is suitable for battery-pack monitoring where two independent thresholds can detect undervoltage and overvoltage conditions. The low 200 uA supply current per comparator helps limit continuous overhead, and the rail-to-rail input behavior supports threshold decisions near the lower operating range. Its open-collector outputs can trigger a host controller, charger, or isolation logic through pull-up resistors. Battery chemistry, transient protection, and the reference accuracy determine the final threshold tolerances.

🧩

Sensor Threshold Interface

The LM2903BIDSGR can translate a low-level sensor output into a logic event by comparing the sensing node with a reference voltage. Its input bias current of 3.5 nA minimizes loading on high-impedance sensors, while the low offset voltage helps preserve measurement precision. A 1 us response time supports relatively quick threshold transitions. For noisy industrial environments, filter the sensor path carefully and keep comparator inputs away from switching currents and relay wiring.

📺

Window Voltage Comparator

Two LM2903BIDSGR channels can establish upper and lower limits for a monitored voltage, producing an overrange signal when the input moves outside either threshold. The dual architecture reduces the component count compared with discrete single comparators and preserves the low 200 uA supply-current figure per channel. Open-collector outputs can be combined through wired logic or read separately by a controller. Threshold matching and output timing should be checked across temperature before the circuit is used for precision production control.

🔧

Relaxation Oscillator

LM2903BIDSGR can form a relaxation oscillator by charging a timing capacitor through a resistor until the input crosses a feedback threshold. The 1 us response time provides a useful advantage over older comparator families with slower switching characteristics, while the open-collector output can source the timing current during part of each cycle. Component tolerances dominate frequency accuracy, so use a stable resistor and capacitor and verify operation across the intended temperature range.

🖥️

Digital Control Signal Conditioning

LM2903BIDSGR is useful when an analog control signal must be converted into a logic-compatible fault or interlock indication. Its open-collector output supports pull-up operation in TTL, MOS, and CMOS systems, allowing the device to coexist with different logic families. The dual channels can handle two related decisions without duplicating supply pins. Keep pull-up values consistent with sink-current limits and the target logic rise time, and avoid placing high-current transitions near the high-impedance input nodes.

تجویز کردہ پروڈکٹس کا خلاصہ

LM2903B Comparator family option استعمال ہوتا ہے: Industrial Overvoltage Protection, Battery Voltage Monitoring, Sensor Threshold Interface, Window Voltage Comparator, Relaxation Oscillator, Digital Control Signal Conditioning LM393B Related dual comparator family استعمال ہوتا ہے: Industrial Overvoltage Protection, Battery Voltage Monitoring, Sensor Threshold Interface, Window Voltage Comparator, Relaxation Oscillator, Digital Control Signal Conditioning
What is the operating voltage of LM2903BIDSGR?
The LM2903BIDSGR supports a maximum voltage rating of 38 V according to the Texas Instruments LM2903B product information. Its differential input range extends to ±38 V, and the common-mode input range includes ground. Actual operating limits must account for supply voltage, input polarity, output pull-up arrangement, and all absolute maximum ratings in the manufacturer datasheet.
What are the key specifications of LM2903BIDSGR that engineers should know?
The LM2903BIDSGR is a dual comparator with a 38 V maximum rating, 0.37 mV low input offset, 3.5 nA low input bias current, 200 uA supply current per comparator, and a 1 us response time. Texas Instruments identifies the device as an open-collector, rail-to-rail-input comparator in an 8-WSON package measuring 2 x 2 mm. These characteristics place it between classic general-purpose comparators and faster precision-oriented designs.
Where can I download the LM2903BIDSGR datasheet PDF?
The official LM2903BIDSGR datasheet and ordering information are available from the Texas Instruments product page at https://www.ti.com/product/LM2903B/part-details/LM2903BIDSGR. The manufacturer datasheet is the primary source for the complete pin description, absolute maximum ratings, electrical characteristics, recommended operating conditions, and typical application circuit.
Where can I find the LM2903BIDSGR pinout?
Use the pin-description table and package drawing in the Texas Instruments LM2903B datasheet to confirm LM2903BIDSGR pin assignments. The component uses an 8-WSON package with eight numbered positions and a thermal pad. Because this exact WSON format is not represented by the platform’s canonical package-diagram library, the diagram field uses the default package graphic rather than presenting an inferred pin map.
Is LM2903BIDSGR a drop-in replacement for LM2903?
Yes, the Texas Instruments LM2903B family is described by the manufacturer as a drop-in replacement for LM293, LM393, and LM2903 A and V versions. Compatibility still depends on matching the original device package, temperature grade, electrical limits, and pin arrangement. LM2903BIDSGR specifically uses the 2 x 2 mm 8-WSON package, so a drop-in claim applies only to designs already using that footprint.
What can replace LM2903BIDSGR?
The closest manufacturer-backed replacement is an equivalent LM2903B ordering option using the same 8-WSON footprint, but package suffix changes can alter reel orientation, temperature grade, or shipping format. Cross-manufacturer alternatives are not asserted here without verified evidence of identical pinout, output topology, common-mode range, supply range, and propagation delay. Confirm any substitute against the manufacturer datasheet before changing a production design.
Is LM2903BIDSGR the same as LM2903BIDSG?
The LM2903BIDSGR ordering code identifies the 8-WSON device in its reeled commercial format, while LM2903BIDSG denotes the same Texas Instruments device family without the reel suffix. The electrical device and package are the same, but order quantities, labeling, and handling format can differ. Engineers should treat the suffix as a manufacturing and ordering attribute rather than a change in comparator performance.
LM2903BIDSGR vs LM2903BIDR - which is better for a new design?
Choose LM2903BIDSGR for a new compact design when board area is important and the PCB is designed for the 2 x 2 mm 8-WSON footprint. LM2903BIDR uses the larger SOIC-8 package and is easier to assemble manually, but it does not share the same footprint. The two family members provide the B-version electrical improvements, while package choice determines board-layout compatibility.
When should I choose LM2903BIDSGR over an SOIC-8 LM2903B?
Choose LM2903BIDSGR when minimizing PCB area is more important than hand-soldering convenience. Its 2 x 2 mm 8-WSON package is substantially smaller than SOIC-8 and supports dense mixed-signal layouts. Choose the SOIC-8 LM2903B for prototype boards assembled by hand, larger through-hole-style package handling, or an existing board whose footprint is already SOIC-8.
Is LM2903BIDSGR suitable for industrial sensing applications?
Yes, LM2903BIDSGR is identified as an industrial-grade dual comparator and combines a 38 V maximum rating with 200 uA supply current per comparator. Its 0.37 mV input offset and 3.5 nA input bias current suit low-level sensor and threshold-monitoring circuits. The 1 us response time also supports faster supervisory loops than older slow-response comparator families.
How do I use the open-collector output of LM2903BIDSGR?
Connect a pull-up resistor from each comparator output to the appropriate logic supply, normally VCC plus, and allow the open-collector transistor to pull the output toward ground. The manufacturer states that the outputs are compatible with TTL, MOS, and CMOS logic. Keep each pull-up close to its output pin to limit propagation delay and reduce susceptibility to interference.
Where can I buy LM2903BIDSGR and check its current lead time?
Use the Request a Quote form on this page to request current availability, unit pricing, minimum order quantity, and lead time for LM2903BIDSGR. The 8-WSON part is offered as an active Texas Instruments ordering option, but stock and delivery schedules change by region, packaging, and order quantity. Submit the required quantity and target date for a current quotation.
What is the price of LM2903BIDSGR?
The current commercial terms for LM2903BIDSGR are displayed through the Request a Quote form on this page. The structured listing does not contain a qualifying quantity-break table for this exact reeled ordering code, so no static price is asserted. Request a quotation with your required quantity, shipment destination, and packaging preference to obtain current pricing and availability.
Is LM2903BIDSGR in stock?
Current stock for LM2903BIDSGR should be confirmed through the Request a Quote form on this page because inventory changes with order quantity and shipment location. The Texas Instruments product page identifies the part as an available ordering option, but that does not guarantee a local stock allocation. Provide your required quantity, reel quantity, and target delivery date with the request.
What is the lead time for LM2903BIDSGR?
The lead time for LM2903BIDSGR depends on current factory and distribution inventory, requested quantity, and destination. Use the Request a Quote form on this page and specify the required order quantity and target delivery date for a current lead-time response. For production planning, allow time for incoming inspection and any traceability requirements in addition to the quoted component lead time.
Does LM2903BIDSGR meet RoHS, REACH, and AEC-Q100 requirements?
The LM2903BIDSGR is an industrial-grade Texas Instruments comparator, but its exact RoHS, REACH, and AEC-Q100 status should be confirmed from the manufacturer product page and declarations. This listing does not infer automotive qualification from the industrial-grade designation. Use the manufacturer compliance documentation for the specific ordering code when regulatory eligibility is part of the sourcing decision.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM2903BIDSGR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose LM2903BIDSGR when a new board can use the 2 x 2 mm 8-WSON footprint and benefits from the LM2903B family's low offset, low input bias current, 200 uA per-comparator supply current, and 1 us response time. It is particularly useful for industrial threshold detection, battery supervision, sensor interfaces, and compact open-collector logic signaling. Choose an SOIC-8 LM2903B when manual assembly and prototype rework are more important than board area. Use the original LM2903 only when cost, availability, or an existing qualified design makes the older electrical specifications acceptable. No cross-manufacturer drop-in alternatives are listed because the available cross-reference information does not establish identical pinout, package, common-mode range, and output behavior. Validate any replacement against the complete manufacturer datasheet rather than relying only on package similarity.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Package 8-WSON, 2 x 2 mm
Brand Texas Instruments
Comparator Type Dual differential comparator
Maximum Voltage Rating 38 V
Differential Input Voltage Range -38 V to +38 V
Input Offset Voltage 0.37 mV
Input Bias Current 3.5 nA
Supply Current 200 uA per comparator
Response Time 1 us
ESD Rating 2 kV HBM
Output Type Open collector
Input Common-Mode Behavior Rail-to-rail

اہم امتیازی خصوصیات

  • Compact B-version dual comparator implementation (بمقابلہLM2903BIDR)
  • Lower offset and bias than the original LM2903 generation (بمقابلہLM2903)
  • Improved supply and switching characteristics (بمقابلہLM2903)

ڈیزائن نوٹس

Route each comparator input directly to its pins and keep the path short, away from power-switching nodes and high-current return paths. The 3.5 nA input bias current supports high-impedance sensing, but contamination, guard leakage, and nearby high-impedance traces can still create meaningful offsets. Place the input reference network close to the device and maintain a continuous ground reference beneath the analog section.

Connect the LM2903BIDSGR exposed thermal pad to the recommended ground-plane land using the manufacturer package land pattern. Provide uninterrupted ground copper beneath the device where practical to improve heat transfer and reduce return-path discontinuity. Follow the assembly guidelines for the 2 x 2 mm WSON package because fine-pitch leads require suitable paste volume, stencil apertures, and reflow control.

Do not treat the open-collector output as a actively driven logic output. Install a pull-up resistor to the correct logic supply, confirm its value against input current and output rise-time requirements, and ensure the receiving device permits an open-collector connection. Also observe the ±38 V differential input limit; input protection networks may affect offset, leakage, and response time.

Keep the open-collector pull-up resistor close to the output pin to minimize a high-impedance trace that can pick up noise. If the comparator controls a relay, solenoid, or long cable, use a driver stage rather than switching the load directly. Place protection and filtering components away from the precision input pins, and verify transient behavior at the connector or sensor boundary.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The device is identified as an industrial-grade dual comparator. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed for the exact ordering code through Texas Instruments. Industrial-grade status does not imply AEC-Q100 qualification.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LM2903BIDSGR datasheet LM2903BIDSGR pinout LM2903BIDSGR datasheet pdf LM2903BIDSGR equivalent LM2903BIDSGR replacement LM2903BIDSGR drop-in replacement LM2903BIDSGR price LM2903BIDSGR stock Texas Instruments LM2903BIDSGR LM2903BIDSGR 8-WSON LM2903BIDSGR vs LM2903BIDR LM2903BIDSGR industrial comparator

متعلقہ اجزاء اور اصطلاحات

Texas Instruments LM2903BIDSGR LM2903B LM2903 LM393B LM2903BIDR dual differential comparator analog comparator comparator IC analog semiconductor open-collector output rail-to-rail input input offset voltage input bias current supply current response time common-mode input voltage differential input voltage ESD protection HBM ESD 8-WSON WSON package surface mount TTL compatibility CMOS compatibility industrial control battery monitoring sensor threshold detection overvoltage protection
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں