LM324LVIDR - 4-Channel 5.5V Op Amp | Texas Instruments
MPN: LM324LVIDR ✓ فعالLM324LVIDR جائزہ
An operational amplifier, or op amp, is a high-gain differential amplifier that compares two input voltages and drives its output to represent their difference. The LM324LV belongs to the broader operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its four channels can amplify sensor signals, buffer high-impedance sources, perform active filtering, or provide simple differential-to-single-ended conversion when configured with external resistors.
The LM324LV family is optimized for supply voltages down to 2.7 V, making it more useful in low-voltage systems than standard LM324 devices intended for wider supply ranges. Its 1 MHz gain-bandwidth product supports general-purpose signal paths rather than high-speed video or precision instrumentation. The 3 mV input offset specification is important for dc applications because it influences the output error after gain is applied and can contribute to input-referred error near the lower end of the input range.
Each channel provides practical flexibility for single-supply designs. Input and output behavior depends on the common-mode and output-swing limits, so the circuit must keep signals within the amplifier's supported operating region. The four amplifiers share a common supply voltage, but their input stages are independent, allowing different signals and gains to be processed in one package. Grounding, bypassing, and output-load conditions remain important for stable low-frequency operation.
Typical uses include battery-powered sensor interfaces, industrial control signals, audio preamplifier stages, active low-pass filters, transducers, and low-voltage data-acquisition modules. The SOIC-14 package is also convenient for prototyping and conventional surface-mount assembly. Because all four channels are independent, unused amplifiers can be configured as buffers, followers, or signal conditioners rather than left unconnected.
For reliable operation, place the supply bypass capacitor close to the positive and ground pins and keep feedback resistors close to the corresponding amplifier inputs. Check input common-mode range and output swing against the actual signal. When replacing a standard LM324, verify voltage range, offset, bandwidth, output-current capability, and stability because the LM324LV is optimized specifically for low-voltage operation.
This page combines the LM324LVIDR electrical and package details with application guidance, validated replacement information, comparison parameters, and practical PCB design notes for engineers evaluating a 2.7 V to 5.5 V quad op amp.
کے لیے ڈراپ اِن متبادل LM324LVIDR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
LM324LVIDT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM324LVIDR زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Number of Amplifiers | 4 channels |
| Operational Amplifier Type | Single general-purpose amplifier |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Maximum Supply Voltage | 5.5 V |
| Operating Voltage | ±2.75 V to 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Input Offset Voltage | 3 mV |
| آپریٹنگ درجہ حرارت رینج | -40°C to 125°C |
| پیکیج | 14-pin SOIC (D) |
| Package Width | 3.90 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| Shipping Format | Tape and reel |
| پنز کی تعداد | 14 pins |
LM324LVIDR پن کنفیگریشن
| پن 1 | OUT1 — Amplifier 1 output |
| پن 2 | IN1- — Amplifier 1 inverting input |
| پن 3 | IN1+ — Amplifier 1 non-inverting input |
| پن 4 | V+ — Positive supply voltage |
| پن 5 | IN2+ — Amplifier 2 non-inverting input |
| پن 6 | IN2- — Amplifier 2 inverting input |
| پن 7 | OUT2 — Amplifier 2 output |
| پن 8 | OUT3 — Amplifier 3 output |
| پن 9 | IN3- — Amplifier 3 inverting input |
| پن 10 | IN3+ — Amplifier 3 non-inverting input |
| پن 11 | V- — Negative supply voltage |
| پن 12 | IN4+ — Amplifier 4 non-inverting input |
| پن 13 | IN4- — Amplifier 4 inverting input |
| پن 14 | OUT4 — Amplifier 4 output |
عام استعمالات
LM324LVIDR کے لیے موزوں ہے 6 ایپلیکیشنs: Low-Voltage Sensor Conditioning, Battery-Powered Analog Front End, Industrial Control Signal Conditioning, Audio Preamplifier and Filter, Active Analog Filters, Portable Data Acquisition.
Low-Voltage Sensor Conditioning
The LM324LVIDR is suitable for conditioning transducers, resistive sensors, and low-level analog signals in 3.3 V or 5 V systems. Each of its four channels can provide gain, inversion, filtering, or buffering while operating across the 2.7 V to 5.5 V supply range. Its 1 MHz gain-bandwidth product is appropriate for general-purpose sensor signals rather than wideband instrumentation. When precision dc measurements are required, evaluate the 3 mV input offset against the smallest signal being measured and keep resistor values in a practical range for the amplifier's input-bias-current behavior.
تجویز کردہ
Battery-Powered Analog Front End
The LM324LVIDR fits battery-powered equipment where a 2.7 V minimum supply is necessary but excess supply headroom is undesirable. Four low-voltage amplifier sections can amplify sensor outputs, implement active filters, and buffer inputs to an ADC or controller within one 14-pin SOIC. The 5.5 V maximum rating supports both 3.3 V and 5 V rails. Because the device is intended for general-purpose operation, verify output swing, common-mode range, and load drive for each channel rather than assuming full rail-to-rail behavior.
تجویز کردہ
Industrial Control Signal Conditioning
The LM324LVIDR can process industrial control signals when the system uses a 2.7 V to 5.5 V control rail. Four channels allow designers to condition current, voltage, position, or status signals without adding four separate packages. The 1 MHz bandwidth supports many slow control and feedback loops, while the -40°C to 125°C rating covers extended industrial environments. Keep sensitive inputs away from switching nodes and high-current traces, and confirm that the input signal remains inside the amplifier's common-mode range throughout process variation.
تجویز کردہ
Audio Preamplifier and Filter
The LM324LVIDR can implement low-voltage audio preamplification, tone control, and active filtering stages. Its four amplifiers provide enough channel count for a multi-stage signal path, while the 1 MHz gain-bandwidth product is suitable for many general-purpose audio applications. Place input and feedback components close to their associated pins to minimize parasitic feedback and noise. The 3 mV input offset specification is important for quiet audio amplification, and the design must account for output swing and loading when driving the following stage.
تجویز کردہ
Active Analog Filters
The four channels in LM324LVIDR can implement first- and second-order active filters at different signal frequencies or stages. Its 2.7 V to 5.5 V operating range makes it practical for low-voltage analog systems, and the 1 MHz gain-bandwidth product provides margin for moderate closed-loop gains. Component tolerances and amplifier input behavior directly influence cutoff accuracy, so use standard resistor and capacitor tolerances and check filter stability against the manufacturer's guidance. Separate sensitive filter nodes from switching-regulator and digital return-current paths.
تجویز کردہ
Portable Data Acquisition
The LM324LVIDR is useful in compact multichannel data-acquisition circuits powered from 3.3 V or 5 V. Four channels can amplify sensor inputs, scale bipolar signals, or provide active filtering before multiplexing and digitization. The -40°C to 125°C range supports varied operating environments, and the 14-pin SOIC package simplifies conventional PCB assembly. For accurate conversion results, keep the 3 mV input offset specification in the error budget and ensure each signal satisfies the common-mode input limits. Place supply bypassing directly across the power pins to reduce noise coupled into high-impedance inputs.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LM324LVIDR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LM324LVIDT |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 14-pin SOIC (D) | 14-pin SOIC (D) |
| Number of Amplifiers | 4 | 4 |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Operating Voltage | ±2.75 V to 5.5 V | ±2.75 V to 5.5 V |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Offset Voltage | 3 mV | 3 mV |
| Operating Temperature Range | -40°C to 125°C | -40°C to 125°C |
اہم امتیازی خصوصیات
- Low-voltage supply operation (بمقابلہLM324DT)
- Four amplifiers in one 14-pin package (بمقابلہLM324DT)
- Defined 1 MHz gain-bandwidth product (بمقابلہLM324LVIDT)
ڈیزائن نوٹس
Place a supply bypass capacitor close to pins 4 and 11 and provide a low-impedance return path to the ground reference used by the signal source. The LM324LVIDR operates from 2.7 V to 5.5 V, but correct supply bypassing remains necessary to prevent ripple and fast transients from modulating the output. Decouple each independently regulated supply section and avoid routing sensitive input returns through switching-current paths.
Keep feedback resistors and input resistors adjacent to their associated amplifier pins, and route non-inverting inputs away from the output of the same channel where practical. This reduces parasitic capacitance and feedback from adjacent channels. Maintain a continuous ground reference beneath the analog section, use short return paths, and separate the op-amp region from switching supplies, high-current outputs, and digital timing networks.
Do not assume that a 5.5 V maximum supply permits inputs and outputs to move freely between the supply rails. Check the LM324LV input common-mode range and output-swing limits for the selected supply, and account for the 3 mV input offset in precision dc designs. Also verify source resistance, capacitive loading, and stability before increasing gain or driving heavier output loads.
The 1 MHz gain-bandwidth product favors low-frequency and moderate-bandwidth signal conditioning rather than high-speed waveform work. For higher closed-loop gains, verify the resulting bandwidth and phase margin, use conservative feedback-component values, and avoid long PCB traces at amplifier inputs. Four independent channels can amplify coupling if adjacent traces carry unrelated high-speed signals, so maintain spacing between sensitive input and output routes.
تعمیل کی معلومات
The LM324LV is a general-purpose commercial operational amplifier family. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations should be confirmed through the manufacturer product documentation or declaration for the ordered configuration.