Texas Instruments

LM324LVIDR - 4-Channel 5.5V Op Amp | Texas Instruments

Référence : LM324LVIDR ✓ Actif
2.7 V to 5.5 V Vdss 14-pin SOIC (D) Package
MOQ : 1 |

LM324LVIDR Présentation

The Texas Instruments LM324LVIDR is a four-channel, general-purpose operational amplifier designed for low-voltage operation from 2.7 V to 5.5 V, with a gain-bandwidth product of 1 MHz and a typical input offset voltage of 3 mV. The device is packaged in a 14-pin SOIC (D) and supports operation from -40°C to 125°C. Four independent amplifiers in one package make it suitable for compact analog signal-conditioning, sensing, filtering, and buffering systems.

An operational amplifier, or op amp, is a high-gain differential amplifier that compares two input voltages and drives its output to represent their difference. The LM324LV belongs to the broader operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its four channels can amplify sensor signals, buffer high-impedance sources, perform active filtering, or provide simple differential-to-single-ended conversion when configured with external resistors.

The LM324LV family is optimized for supply voltages down to 2.7 V, making it more useful in low-voltage systems than standard LM324 devices intended for wider supply ranges. Its 1 MHz gain-bandwidth product supports general-purpose signal paths rather than high-speed video or precision instrumentation. The 3 mV input offset specification is important for dc applications because it influences the output error after gain is applied and can contribute to input-referred error near the lower end of the input range.

Each channel provides practical flexibility for single-supply designs. Input and output behavior depends on the common-mode and output-swing limits, so the circuit must keep signals within the amplifier's supported operating region. The four amplifiers share a common supply voltage, but their input stages are independent, allowing different signals and gains to be processed in one package. Grounding, bypassing, and output-load conditions remain important for stable low-frequency operation.

Typical uses include battery-powered sensor interfaces, industrial control signals, audio preamplifier stages, active low-pass filters, transducers, and low-voltage data-acquisition modules. The SOIC-14 package is also convenient for prototyping and conventional surface-mount assembly. Because all four channels are independent, unused amplifiers can be configured as buffers, followers, or signal conditioners rather than left unconnected.

For reliable operation, place the supply bypass capacitor close to the positive and ground pins and keep feedback resistors close to the corresponding amplifier inputs. Check input common-mode range and output swing against the actual signal. When replacing a standard LM324, verify voltage range, offset, bandwidth, output-current capability, and stability because the LM324LV is optimized specifically for low-voltage operation.

This page combines the LM324LVIDR electrical and package details with application guidance, validated replacement information, comparison parameters, and practical PCB design notes for engineers evaluating a 2.7 V to 5.5 V quad op amp.

Alternatives de remplacement direct pour LM324LVIDR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

LM324LVIDT

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 14-pin SOIC (D)
Electrical ratings remain 2.7 V to 5.5 V, 1 MHz bandwidth, and 3 mV offset; the ordering suffix changes the shipping format rather than the pinout.

📋 Alternative de référence (hors catalogue)

LM324LVIDR Valeurs maximales et caractéristiques électriques

Number of Amplifiers 4 channels
Operational Amplifier Type Single general-purpose amplifier
Supply Voltage Range 2.7 V to 5.5 V
Maximum Supply Voltage 5.5 V
Operating Voltage ±2.75 V to 5.5 V
Gain-Bandwidth Product 1 MHz
Input Offset Voltage 3 mV
Plage de température de fonctionnement -40°C to 125°C
Boîtier 14-pin SOIC (D)
Package Width 3.90 mm
Type de montage Surface mount
Shipping Format Tape and reel
Nombre de broches 14 pins

Configuration des broches de LM324LVIDR

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Broche 1 OUT1 — Amplifier 1 output
Broche 2 IN1- — Amplifier 1 inverting input
Broche 3 IN1+ — Amplifier 1 non-inverting input
Broche 4 V+ — Positive supply voltage
Broche 5 IN2+ — Amplifier 2 non-inverting input
Broche 6 IN2- — Amplifier 2 inverting input
Broche 7 OUT2 — Amplifier 2 output
Broche 8 OUT3 — Amplifier 3 output
Broche 9 IN3- — Amplifier 3 inverting input
Broche 10 IN3+ — Amplifier 3 non-inverting input
Broche 11 V- — Negative supply voltage
Broche 12 IN4+ — Amplifier 4 non-inverting input
Broche 13 IN4- — Amplifier 4 inverting input
Broche 14 OUT4 — Amplifier 4 output

Applications typiques

LM324LVIDR convient pour 6 applications: Low-Voltage Sensor Conditioning, Battery-Powered Analog Front End, Industrial Control Signal Conditioning, Audio Preamplifier and Filter, Active Analog Filters, Portable Data Acquisition.

🧩

Low-Voltage Sensor Conditioning

The LM324LVIDR is suitable for conditioning transducers, resistive sensors, and low-level analog signals in 3.3 V or 5 V systems. Each of its four channels can provide gain, inversion, filtering, or buffering while operating across the 2.7 V to 5.5 V supply range. Its 1 MHz gain-bandwidth product is appropriate for general-purpose sensor signals rather than wideband instrumentation. When precision dc measurements are required, evaluate the 3 mV input offset against the smallest signal being measured and keep resistor values in a practical range for the amplifier's input-bias-current behavior.

🔋

Battery-Powered Analog Front End

The LM324LVIDR fits battery-powered equipment where a 2.7 V minimum supply is necessary but excess supply headroom is undesirable. Four low-voltage amplifier sections can amplify sensor outputs, implement active filters, and buffer inputs to an ADC or controller within one 14-pin SOIC. The 5.5 V maximum rating supports both 3.3 V and 5 V rails. Because the device is intended for general-purpose operation, verify output swing, common-mode range, and load drive for each channel rather than assuming full rail-to-rail behavior.

🏭

Industrial Control Signal Conditioning

The LM324LVIDR can process industrial control signals when the system uses a 2.7 V to 5.5 V control rail. Four channels allow designers to condition current, voltage, position, or status signals without adding four separate packages. The 1 MHz bandwidth supports many slow control and feedback loops, while the -40°C to 125°C rating covers extended industrial environments. Keep sensitive inputs away from switching nodes and high-current traces, and confirm that the input signal remains inside the amplifier's common-mode range throughout process variation.

🎧

Audio Preamplifier and Filter

The LM324LVIDR can implement low-voltage audio preamplification, tone control, and active filtering stages. Its four amplifiers provide enough channel count for a multi-stage signal path, while the 1 MHz gain-bandwidth product is suitable for many general-purpose audio applications. Place input and feedback components close to their associated pins to minimize parasitic feedback and noise. The 3 mV input offset specification is important for quiet audio amplification, and the design must account for output swing and loading when driving the following stage.

📻

Active Analog Filters

The four channels in LM324LVIDR can implement first- and second-order active filters at different signal frequencies or stages. Its 2.7 V to 5.5 V operating range makes it practical for low-voltage analog systems, and the 1 MHz gain-bandwidth product provides margin for moderate closed-loop gains. Component tolerances and amplifier input behavior directly influence cutoff accuracy, so use standard resistor and capacitor tolerances and check filter stability against the manufacturer's guidance. Separate sensitive filter nodes from switching-regulator and digital return-current paths.

📟

Portable Data Acquisition

The LM324LVIDR is useful in compact multichannel data-acquisition circuits powered from 3.3 V or 5 V. Four channels can amplify sensor inputs, scale bipolar signals, or provide active filtering before multiplexing and digitization. The -40°C to 125°C range supports varied operating environments, and the 14-pin SOIC package simplifies conventional PCB assembly. For accurate conversion results, keep the 3 mV input offset specification in the error budget and ensure each signal satisfies the common-mode input limits. Place supply bypassing directly across the power pins to reduce noise coupled into high-impedance inputs.

Where can I buy LM324LVIDR online?
LM324LVIDR can be requested through the Request a Quote form on this page for current availability, order quantities, and delivery terms. The device is a Texas Instruments four-channel operational amplifier in a 14-pin SOIC package. Because inventory and commercial terms can change, use the quote form for a current supplier response rather than relying on a historical listing.
What is the price of LM324LVIDR?
Use the Request a Quote form on this page to request the current LM324LVIDR unit price and volume breaks. The part is a four-channel, 2.7 V to 5.5 V operational amplifier with a 1 MHz gain-bandwidth product and a 3 mV input offset voltage. Current pricing should be confirmed against the requested quantity and package form.
What is the lead time for LM324LVIDR?
Request the current lead time through the Request a Quote form on this page. The LM324LVIDR is offered in a 14-pin SOIC (D) package for surface-mount assembly, and the order quantity and delivery schedule should be confirmed when the quotation is prepared. The manufacturer product page identifies the LM324LV family for low-voltage operation.
Is LM324LVIDR in stock?
Current stock status should be confirmed through the Request a Quote form on this page. LM324LVIDR is catalogued as an active Texas Instruments component in the 14-pin SOIC package, but availability can vary by order quantity, packaging format, and regional distribution. The quote form provides the appropriate channel for a current inventory response.
What are the key specifications of LM324LVIDR that engineers should know?
The LM324LVIDR integrates four general-purpose operational amplifiers, operates from 2.7 V to 5.5 V, provides a 1 MHz gain-bandwidth product, and has a 3 mV input offset voltage. According to the Texas Instruments LM324LV datasheet, the device supports -40°C to 125°C operation and uses a 14-pin SOIC package. These parameters define its suitability for low-voltage signal conditioning.
What is the operating voltage of LM324LVIDR?
The LM324LVIDR operates from 2.7 V to 5.5 V. The manufacturer describes this as ±2.75 V to 5.5 V operating capability, making the device suitable for systems built around 3.3 V and 5 V rails. Designers should verify the input common-mode range and output swing within the chosen supply voltage.
What is the gain-bandwidth product of LM324LVIDR?
The LM324LVIDR has a 1 MHz gain-bandwidth product per amplifier. According to the Texas Instruments LM324LV datasheet, this supports general-purpose amplification of low-frequency and moderate-bandwidth signals. A closed-loop gain of 10 therefore provides approximately 100 kHz bandwidth before additional stability, slew-rate, and load limitations are considered.
How many amplifiers are in LM324LVIDR?
The LM324LVIDR contains four independent operational amplifiers in one 14-pin SOIC package. This arrangement allows one package to provide four separate gain, filtering, or buffering stages. Each amplifier has its own input and output pins, while the four channels share the positive and negative supply connections.
Where can I download the LM324LVIDR datasheet PDF?
The official Texas Instruments LM324LV datasheet is available from the manufacturer product page at https://www.ti.com/lit/gpn/LM324LV. It describes the LM321LV, LM358LV, and LM324LV low-voltage family, including the LM324LVIDR operating range, electrical characteristics, package information, and application guidance. Use the manufacturer document for design sign-off.
Where can I find the LM324LVIDR pinout?
The LM324LVIDR pinout is shown in the Texas Instruments LM324LV datasheet. Its 14-pin SOIC arrangement provides four complete amplifier sections: outputs on pins 1, 7, 8, and 14; inverting inputs on pins 2, 6, 9, and 13; non-inverting inputs on pins 3, 5, 10, and 12; and power connections on pins 4 and 11.
Is LM324LVIDR suitable for sensor signal conditioning?
Yes, LM324LVIDR is suitable for many low-voltage sensor signal-conditioning applications. Its 2.7 V to 5.5 V supply range supports 3.3 V and 5 V systems, while the 1 MHz gain-bandwidth product handles general-purpose sensor signals and the four channels provide flexible filtering or buffering. The 3 mV input offset must be considered for high-accuracy dc measurements.
When should I choose LM324LVIDR over a standard LM324?
Choose LM324LVIDR when the circuit operates from 2.7 V to 5.5 V and benefits from a dedicated low-voltage four-channel amplifier. A standard LM324 is intended for a wider supply range and may not provide equivalent performance or operating margin at 3.3 V. Confirm offset, bandwidth, input range, and output swing against the application requirements.
Can LM324LVIDR be used for audio preamplification?
Yes, LM324LVIDR can provide the first gain stage in a low-voltage audio preamplifier. Its four channels allow gain, filtering, and buffering functions in one package, while the 1 MHz bandwidth is adequate for many general-purpose audio paths. The circuit should remain within the output-swing limits and avoid driving loads that exceed the amplifier's output-current capability.
What is the best drop-in replacement for LM324LVIDR?
LM324LVIDT is the closest same-family SOIC option because it retains the LM324LV low-voltage architecture and 14-pin electrical layout, although its tape-and-reel order code differs. Confirm temperature grade, offset, package dimensions, and sourcing requirements before substitution. The Request a Quote form can help identify the exact available configuration.
What can replace LM324LVIDR?
LM324LVIDT is a candidate replacement when the 14-pin SOIC footprint and LM324LV electrical function are acceptable. A different manufacturer or standard LM324 should not be treated as automatically interchangeable because its low-voltage input range, offset, bandwidth, output swing, and supply limits may differ. Validate the complete operating envelope before changing the BOM.

Données de référence d'ingénierie pour LM324LVIDR — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose LM324LVIDR for compact 2.7 V to 5.5 V analog systems that need four general-purpose amplifiers, including low-voltage sensors, audio stages, filters, and signal buffers. Its 1 MHz gain-bandwidth product and 3 mV input offset fit general signal-conditioning rather than precision or high-speed requirements. LM324LVIDT is the closest same-family candidate when the 14-pin SOIC footprint and low-voltage electrical ratings are retained. Standard LM324 devices can provide broader supply-voltage capability, but they may not offer the same performance margin at 3.3 V and must be checked for input range, output swing, offset, and bandwidth before substitution. For designs requiring rail-to-rail output, very low offset, or substantially higher bandwidth, select an amplifier specifically characterized for those parameters rather than assuming general LM324 compatibility.

Comparaison avec les alternatives

Paramètre Ce produit LM324LVIDT
Brand Texas Instruments Texas Instruments
Package 14-pin SOIC (D) 14-pin SOIC (D)
Number of Amplifiers 4 4
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
Operating Voltage ±2.75 V to 5.5 V ±2.75 V to 5.5 V
Gain-Bandwidth Product 1 MHz 1 MHz
Input Offset Voltage 3 mV 3 mV
Operating Temperature Range -40°C to 125°C -40°C to 125°C

Principaux différenciateurs

  • Low-voltage supply operation (vs LM324DT)
  • Four amplifiers in one 14-pin package (vs LM324DT)
  • Defined 1 MHz gain-bandwidth product (vs LM324LVIDT)

Notes de conception

Place a supply bypass capacitor close to pins 4 and 11 and provide a low-impedance return path to the ground reference used by the signal source. The LM324LVIDR operates from 2.7 V to 5.5 V, but correct supply bypassing remains necessary to prevent ripple and fast transients from modulating the output. Decouple each independently regulated supply section and avoid routing sensitive input returns through switching-current paths.

Keep feedback resistors and input resistors adjacent to their associated amplifier pins, and route non-inverting inputs away from the output of the same channel where practical. This reduces parasitic capacitance and feedback from adjacent channels. Maintain a continuous ground reference beneath the analog section, use short return paths, and separate the op-amp region from switching supplies, high-current outputs, and digital timing networks.

Do not assume that a 5.5 V maximum supply permits inputs and outputs to move freely between the supply rails. Check the LM324LV input common-mode range and output-swing limits for the selected supply, and account for the 3 mV input offset in precision dc designs. Also verify source resistance, capacitive loading, and stability before increasing gain or driving heavier output loads.

The 1 MHz gain-bandwidth product favors low-frequency and moderate-bandwidth signal conditioning rather than high-speed waveform work. For higher closed-loop gains, verify the resulting bandwidth and phase margin, use conservative feedback-component values, and avoid long PCB traces at amplifier inputs. Four independent channels can amplify coupling if adjacent traces carry unrelated high-speed signals, so maintain spacing between sensitive input and output routes.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The LM324LV is a general-purpose commercial operational amplifier family. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations should be confirmed through the manufacturer product documentation or declaration for the ordered configuration.

Recherches associées

LM324LVIDR LM324LVIDR datasheet LM324LVIDR datasheet pdf LM324LVIDR pinout LM324LVIDR equivalent LM324LVIDR replacement LM324LVIDR price LM324LVIDR stock Texas Instruments LM324LVIDR LM324LVIDR 14-SOIC LM324LVIDR 2.7V 5.5V LM324LVIDR 1MHz op amp LM324LVIDR sensor signal conditioning LM324LVIDR vs LM324DT LM324LVIDR vs LM324LVIDT

Composants & termes associés

Texas Instruments LM324LVIDR LM324LV LM324LVIDT LM324DT LM324DG LM321LV LM358LV Operational amplifier Op amp Quad operational amplifier General-purpose amplifier Analog signal conditioner Gain-bandwidth product Input offset voltage Common-mode input range Output swing Active filter Audio preamplifier Sensor interface Battery-powered electronics Industrial control SOIC-14 Surface mount
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ