MAX307EUI+ - Dual 8:1 100Ω Analog Multiplexer | Analog Devices
MPN: MAX307EUI+ ✓ فعالMAX307EUI+ جائزہ
An analog multiplexer is an integrated switching network that connects one common signal path to multiple input channels. A dual 8:1 configuration provides two independent 8:1 selectors, allowing a precision measurement system to route two signal groups through the same downstream circuitry. Within the power-management hierarchy of semiconductor functions, the MAX307EUI+ belongs to the interface-IC and analog-switch category, where low resistance, low leakage, and predictable channel matching help preserve signal integrity.
The MAX307 family uses a monolithic CMOS process identified as an improved 44 V silicon gate process. Its on-resistance is specified below 100 Ω and remains flat over the specified analog signal range, with maximum variation of 7 Ω. Channel-to-channel matching is maintained within 5 Ω, reducing gain errors when different inputs are selected sequentially. Off-state leakage is less than 2.5 nA at +85°C, while transition time is below 250 ns.
The MAX307EUI+ is configured as two 8-to-1 analog multiplexers. This arrangement is useful in precision instrumentation, data acquisition, test systems, battery monitoring, and industrial control designs where multiple analog inputs must share a converter or measurement front end. The two selectors can also be used for differential routing when their common terminals and control signals are connected appropriately.
System integration requires attention to supply voltage, logic thresholds, signal range, input impedance, and off-channel behavior. Because the control inputs are digital while the switched paths carry analog signals, the device should be positioned close to the sensitive front end to minimize capacitive loading and trace pickup. Decoupling should follow the recommendations in the manufacturer data sheet.
For replacement decisions, package body size and pin count alone do not establish compatibility. A suitable drop-in part must also preserve the dual 8:1 topology, pin assignments, control logic, on-resistance behavior, voltage rating, and electrical limits. This page compares the documented MAX307-family alternatives and identifies which differences must be reviewed before changing the BOM.
This product documentation combines the manufacturer specifications with application-focused engineering guidance, helping designers evaluate routing performance, switching speed, leakage, package constraints, and practical drop-in replacement options rather than relying on a basic distributor catalog summary.
کے لیے ڈراپ اِن متبادل MAX307EUI+ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
MAX306EUI+
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX307EUI
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX307EUI+T
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX307EUI+ تفصیلات
| Multiplexer Configuration | Dual 8:1 |
| Number of Circuits | 2 circuits |
| On-Resistance | <100 Ω |
| Channel-to-Channel On-Resistance Matching | <5 Ω |
| On-Resistance Variation Over Analog Signal Range | 7 Ω maximum |
| Off-State Input Leakage | <2.5 nA at +85°C |
| Transition Time | <250 ns |
| Supply Voltage Range | 5 V to 30 V |
| Process Technology | 44 V silicon gate CMOS process |
| پیکیج | 28-pin TSSOP |
| ماؤنٹنگ ٹائپ | Surface mount |
| Manufacturer | Analog Devices / Maxim Integrated |
| لائف سائیکل کی حالت | Production |
MAX307EUI+ 28-pin tssop پن کنفیگریشن گائیڈ
MAX307EUI+ (28-pin tssop پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX307EUI+.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MAX307EUI+ کے لیے موزوں ہے 6 ایپلیکیشنs: Precision Data Acquisition, Automated Test Equipment, Battery Cell Monitoring, Industrial Sensor Interface, Signal Conditioning Front End, Programmable Signal Routing.
Precision Data Acquisition
The MAX307EUI+ is suitable for routing multiple sensor or instrument outputs into a precision measurement chain. Each 8:1 section can connect eight analog inputs to a common path, while on-resistance below 100 Ω, channel matching within 5 Ω, and resistance variation limited to 7 Ω help limit channel-dependent gain errors. Its transition time below 250 ns supports rapid source selection. Place the device near the ADC input and use short, guarded traces so capacitance and leakage do not degrade high-impedance measurements.
تجویز کردہ
Automated Test Equipment
The MAX307EUI+ can select test signals efficiently in automated measurement systems because its dual 8:1 topology provides two independent analog routers. Transition times below 250 ns allow the control sequence to move between test points rapidly, while the matched, flat on-resistance reduces amplitude variation as different channels are selected. The 28-pin TSSOP package supports compact instrument layouts. Account for the approximately 100 Ω maximum switch resistance when calculating divider ratios and settling behavior.
تجویز کردہ
Battery Cell Monitoring
The dual 8:1 configuration makes the MAX307EUI+ useful for sequential battery-cell measurement, where a compact selector reduces the number of signal-routing components. Low off-state leakage below 2.5 nA at +85°C helps isolate unselected cells, and matched on-resistance within 5 Ω improves consistency between measurements. The 5 V to 30 V supply range supports industrial systems. Confirm the permitted analog signal range and ensure the selected common path cannot expose an input beyond its rating.
تجویز کردہ
Industrial Sensor Interface
The MAX307EUI+ allows a controller to connect multiple analog sensors to one measurement amplifier or converter. Less than 100 Ω on-resistance is low enough for many sensor interfaces, and the 7 Ω maximum resistance variation helps maintain predictable signal scaling across the analog range. Sub-250 ns transitions support rapid sampling sequences. For high-impedance sensors, minimize trace length, maintain a stable reference return, and evaluate leakage and input capacitance together before finalizing the routing layout.
تجویز کردہ
Signal Conditioning Front End
The MAX307EUI+ can place a selected sensor or source ahead of an instrumentation amplifier, filter, or ADC. Its low and tightly matched on-resistance reduces switching-induced amplitude changes, while the dual selector arrangement allows two signal groups to share downstream conditioning. This is useful in programmable instrumentation and process-control interfaces. The common output still requires the correct termination and protection for the expected source impedance and signal range.
تجویز کردہ
Programmable Signal Routing
The MAX307EUI+ supports programmable routing in equipment that must connect one of several analog sources to a fixed downstream circuit. The dual 8:1 organization provides sixteen switched inputs in total when both sections are used, while transition time below 250 ns supports rapid control sequences. Flat on-resistance across the analog range improves source-to-source consistency. Use the manufacturer pin table to assign address controls and ensure unused or disabled channels are connected to a defined state.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MAX307EUI+ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MAX306EUI+ | MAX307EUI | MAX307EUI+T |
|---|---|---|---|---|
| Package | TSSOP-28 | TSSOP-28 | TSSOP-28 | TSSOP-28 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Multiplexer Configuration | Dual 8:1 | Dual 8:1 | Dual 8:1 | Dual 8:1 |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
اہم امتیازی خصوصیات
- Fast precision switching for dual-channel routing (بمقابلہMAX306EUI+)
- Tightly controlled channel matching (بمقابلہMAX306EUI+)
- Exact MAX307 family configuration (بمقابلہMAX307EUI)
ڈیزائن نوٹس
Place the MAX307EUI+ close to the ADC or analog measurement amplifier to minimize parasitic capacitance and reduce settling time. The switch contributes up to approximately 100 Ω of on-resistance, so source impedance should remain much lower when accurate gain is required. Use short traces, a continuous ground reference, and guarding around sensitive input nodes.
Route the two 8:1 selector sections according to the exact MAX306/MAX307 pin table and keep address-control traces away from high-impedance common-path traces. The TSSOP-28 footprint requires adequate lead clearance for soldering and inspection. Follow the manufacturer data sheet for input, output, and supply decoupling rather than relying on a generic multiplexer layout.
Do not assume that a TSSOP-28 multiplexer is automatically a drop-in replacement. Verify address-control polarity, input assignment, common-terminal connections, logic thresholds, supply range, leakage, and the maximum analog signal voltage. The MAX306EUI+ is a same-family candidate, but its timing and leakage requirements must be confirmed against the original circuit before release.
The MAX307EUI+ operates from 5 V to 30 V, so the supply must remain within the documented range during startup, transients, and fault conditions. Provide local supply decoupling and evaluate control-pin states during power sequencing. The manufacturer's data sheet should be used for the final capacitor values and recommended operating conditions.
تعمیل کی معلومات
The MAX307 family is listed as a production product, but exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated for the MAX307EUI+ ordering code. No automotive qualification is indicated for this catalog entry.