Analog Devices

MAX307EUI+ - Dual 8:1 100Ω Analog Multiplexer | Analog Devices

MPN: MAX307EUI+ ✓ 啟用中
5 V to 30 V Vdss <100 Ω Rds(on) 28-pin TSSOP Package
MOQ: 1 |

MAX307EUI+ 概覽

The Analog Devices MAX307EUI+ is a precision dual 8:1 CMOS analog multiplexer with less than 100 Ω on-resistance, channel matching within 5 Ω, and switching transitions below 250 ns. The device is packaged in a 28-pin TSSOP and operates from 5 V to 30 V.

An analog multiplexer is an integrated switching network that connects one common signal path to multiple input channels. A dual 8:1 configuration provides two independent 8:1 selectors, allowing a precision measurement system to route two signal groups through the same downstream circuitry. Within the power-management hierarchy of semiconductor functions, the MAX307EUI+ belongs to the interface-IC and analog-switch category, where low resistance, low leakage, and predictable channel matching help preserve signal integrity.

The MAX307 family uses a monolithic CMOS process identified as an improved 44 V silicon gate process. Its on-resistance is specified below 100 Ω and remains flat over the specified analog signal range, with maximum variation of 7 Ω. Channel-to-channel matching is maintained within 5 Ω, reducing gain errors when different inputs are selected sequentially. Off-state leakage is less than 2.5 nA at +85°C, while transition time is below 250 ns.

The MAX307EUI+ is configured as two 8-to-1 analog multiplexers. This arrangement is useful in precision instrumentation, data acquisition, test systems, battery monitoring, and industrial control designs where multiple analog inputs must share a converter or measurement front end. The two selectors can also be used for differential routing when their common terminals and control signals are connected appropriately.

System integration requires attention to supply voltage, logic thresholds, signal range, input impedance, and off-channel behavior. Because the control inputs are digital while the switched paths carry analog signals, the device should be positioned close to the sensitive front end to minimize capacitive loading and trace pickup. Decoupling should follow the recommendations in the manufacturer data sheet.

For replacement decisions, package body size and pin count alone do not establish compatibility. A suitable drop-in part must also preserve the dual 8:1 topology, pin assignments, control logic, on-resistance behavior, voltage rating, and electrical limits. This page compares the documented MAX307-family alternatives and identifies which differences must be reviewed before changing the BOM.

This product documentation combines the manufacturer specifications with application-focused engineering guidance, helping designers evaluate routing performance, switching speed, leakage, package constraints, and practical drop-in replacement options rather than relying on a basic distributor catalog summary.

直接替換替代品,適用於 MAX307EUI+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

MAX306EUI+

✅ 直接替換 ⚠️ 規格未經驗證
📦 TSSOP-28
Same-family dual 8:1 MAX306/MAX307 architecture; electrical timing, leakage, and logic details must be verified before substitution.

📋 參考替代品(不在目錄中)

MAX307EUI

✅ 直接替換
📦 TSSOP-28
Same MAX307 family and TSSOP-28 package; the plus designation and ordering characteristics must be checked for the required production conditions.

📋 參考替代品(不在目錄中)

MAX307EUI+T

✅ 直接替換
📦 TSSOP-28
Same MAX307EUI+ electrical family and TSSOP-28 package; identified with the tape-and-reel ordering suffix.

📋 參考替代品(不在目錄中)

MAX307EUI+ 規格

Multiplexer Configuration Dual 8:1
Number of Circuits 2 circuits
On-Resistance <100 Ω
Channel-to-Channel On-Resistance Matching <5 Ω
On-Resistance Variation Over Analog Signal Range 7 Ω maximum
Off-State Input Leakage <2.5 nA at +85°C
Transition Time <250 ns
Supply Voltage Range 5 V to 30 V
Process Technology 44 V silicon gate CMOS process
封裝 28-pin TSSOP
安裝類型 Surface mount
Manufacturer Analog Devices / Maxim Integrated
生命週期狀態 Production

MAX307EUI+ 28-pin tssop 腳位配置指南

MAX307EUI+(28-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX307EUI+ 的 28-pin tssop 封裝腳位圖

無詳細腳位定義資料: MAX307EUI+.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX307EUI+ 適用於 6 應用s: Precision Data Acquisition, Automated Test Equipment, Battery Cell Monitoring, Industrial Sensor Interface, Signal Conditioning Front End, Programmable Signal Routing.

📊

Precision Data Acquisition

The MAX307EUI+ is suitable for routing multiple sensor or instrument outputs into a precision measurement chain. Each 8:1 section can connect eight analog inputs to a common path, while on-resistance below 100 Ω, channel matching within 5 Ω, and resistance variation limited to 7 Ω help limit channel-dependent gain errors. Its transition time below 250 ns supports rapid source selection. Place the device near the ADC input and use short, guarded traces so capacitance and leakage do not degrade high-impedance measurements.

🧪

Automated Test Equipment

The MAX307EUI+ can select test signals efficiently in automated measurement systems because its dual 8:1 topology provides two independent analog routers. Transition times below 250 ns allow the control sequence to move between test points rapidly, while the matched, flat on-resistance reduces amplitude variation as different channels are selected. The 28-pin TSSOP package supports compact instrument layouts. Account for the approximately 100 Ω maximum switch resistance when calculating divider ratios and settling behavior.

🔋

Battery Cell Monitoring

The dual 8:1 configuration makes the MAX307EUI+ useful for sequential battery-cell measurement, where a compact selector reduces the number of signal-routing components. Low off-state leakage below 2.5 nA at +85°C helps isolate unselected cells, and matched on-resistance within 5 Ω improves consistency between measurements. The 5 V to 30 V supply range supports industrial systems. Confirm the permitted analog signal range and ensure the selected common path cannot expose an input beyond its rating.

🏭

Industrial Sensor Interface

The MAX307EUI+ allows a controller to connect multiple analog sensors to one measurement amplifier or converter. Less than 100 Ω on-resistance is low enough for many sensor interfaces, and the 7 Ω maximum resistance variation helps maintain predictable signal scaling across the analog range. Sub-250 ns transitions support rapid sampling sequences. For high-impedance sensors, minimize trace length, maintain a stable reference return, and evaluate leakage and input capacitance together before finalizing the routing layout.

⚙️

Signal Conditioning Front End

The MAX307EUI+ can place a selected sensor or source ahead of an instrumentation amplifier, filter, or ADC. Its low and tightly matched on-resistance reduces switching-induced amplitude changes, while the dual selector arrangement allows two signal groups to share downstream conditioning. This is useful in programmable instrumentation and process-control interfaces. The common output still requires the correct termination and protection for the expected source impedance and signal range.

🔀

Programmable Signal Routing

The MAX307EUI+ supports programmable routing in equipment that must connect one of several analog sources to a fixed downstream circuit. The dual 8:1 organization provides sixteen switched inputs in total when both sections are used, while transition time below 250 ns supports rapid control sequences. Flat on-resistance across the analog range improves source-to-source consistency. Use the manufacturer pin table to assign address controls and ensure unused or disabled channels are connected to a defined state.

推薦產品摘要

MAX307EUI Same MAX307 family and TSSOP-28 package 用於: Precision Data Acquisition, Automated Test Equipment, Industrial Sensor Interface, Signal Conditioning Front End, Programmable Signal Routing MAX307EUI+T Same MAX307EUI+ family with tape-and-reel ordering suffix 用於: Precision Data Acquisition, Automated Test Equipment, Battery Cell Monitoring, Signal Conditioning Front End MAX306EUI+ Same MAX306/MAX307 dual-multiplexer family candidate 用於: Battery Cell Monitoring, Industrial Sensor Interface, Programmable Signal Routing
What is the MAX307EUI+?
The MAX307EUI+ is a precision dual 8:1 CMOS analog multiplexer from Analog Devices, packaged in a 28-pin TSSOP. It provides two independent analog selectors with on-resistance below 100 Ω, channel matching within 5 Ω, and transition time below 250 ns. According to the manufacturer MAX306/MAX307 data sheet, it is intended for precision routing of analog signals in multi-channel measurement and control systems.
What are the key specifications of MAX307EUI+ that engineers should know?
The MAX307EUI+ combines two 8:1 analog selectors, less than 100 Ω on-resistance, less than 5 Ω channel matching, and less than 250 ns transition time in a 28-pin TSSOP. Its supply range is 5 V to 30 V, and off-state input leakage is below 2.5 nA at +85°C. These characteristics make it suitable for precision instrumentation, data acquisition, test equipment, and industrial measurement systems.
Where can I download the MAX307EUI+ datasheet PDF?
The official MAX306/MAX307 data sheet is available from Analog Devices at the manufacturer PDF link listed on this page. It contains the device description, electrical characteristics, pin information, and operating details. Use the MAX306/MAX307 document because the MAX307EUI+ belongs to the MAX307 family and is also covered alongside the closely related MAX306 series.
Where can I find the MAX307EUI+ pinout?
The MAX307EUI+ pinout and pin descriptions are located in the pin-configuration section of the official MAX306/MAX307 manufacturer data sheet. The device uses a 28-pin TSSOP package. Assign PCB tracks from that pin table rather than inferring connections from generic 8:1 multiplexer diagrams, because control inputs, common terminals, and dual-mux connections must match the specific package configuration.
How does the MAX307EUI+ switch analog signals?
The MAX307EUI+ uses two independent 8:1 CMOS analog switching networks. Each selector routes one of eight inputs to a common path under the control of address logic. The manufacturer specifies on-resistance below 100 Ω, a maximum variation of 7 Ω across the analog signal range, and channel matching within 5 Ω, helping preserve amplitude accuracy when measurements move between input channels.
What is the switching speed of MAX307EUI+?
The MAX307EUI+ transition time is less than 250 ns according to the Analog Devices MAX306/MAX307 data sheet. This enables the device to change source connections rapidly in automated test and data-acquisition systems. Practical settling performance also depends on source impedance, capacitances, control timing, and the bandwidth of the analog circuit connected to the multiplexer output.
Is MAX307EUI+ suitable for precision measurement systems?
Yes, the MAX307EUI+ is designed for precision analog multiplexing, with less than 100 Ω on-resistance, matching within 5 Ω, and flat resistance across the specified signal range. These features reduce channel-dependent errors when a precision ADC, instrumentation amplifier, or reference is connected to the common output. The 28-pin TSSOP package also supports compact, surface-mount measurement instruments.
MAX307EUI+ vs MAX306EUI+ - which is better for a precision ADC?
The MAX307EUI+ is the preferred choice when the design requires the MAX307 family's documented performance, including transition time below 250 ns and off-state leakage below 2.5 nA at +85°C. The MAX306EUI+ is a related same-package device, but its exact electrical limits and channel configuration must be checked against the requirements of the selected ADC and sampling sequence before substituting it.
When should I choose MAX307EUI+ over another dual 8:1 multiplexer?
Choose the MAX307EUI+ when the system benefits from a precision dual 8:1 configuration, on-resistance below 100 Ω, channel matching within 5 Ω, and sub-250 ns transitions. Consider another option only when its supply range, logic thresholds, leakage, bandwidth, pin configuration, and lifecycle requirements provide a clear advantage. A lower-resistance device is not automatically preferable if its power consumption or signal-range limits are less suitable.
What can replace the MAX307EUI+?
The closest documented same-brand replacement is the MAX306EUI+, subject to confirmation of every electrical limit and application requirement. The MAX307EUI and MAX307EUI+T also appear in the family listing, but suffix and packaging differences must be checked against the exact assembly requirements. Verify pin assignments, supply voltage, control logic, on-resistance, leakage, and operating-temperature requirements before replacing the MAX307EUI+.
Is MAX307EUI+ the same as MAX307EUI?
The MAX307EUI and MAX307EUI+ are closely related MAX307 catalog entries, but the plus designation should not be treated as electrically irrelevant without checking the manufacturer ordering information. Confirm the exact package, temperature range, lead finish, and production status for the assembly being replaced. The official MAX306/MAX307 data sheet and Analog Devices product page are the controlling documents for ordering details.
What is the best Analog Devices equivalent for MAX307EUI+?
The MAX306EUI+ is the closest documented Analog Devices alternative because it belongs to the same MAX306/MAX307 family and uses the same TSSOP-28 family construction. It is a candidate rather than an unconditional substitute: verify the exact pinout, on-resistance, leakage, transition timing, logic levels, and supply range. The manufacturer data sheet is the authority for determining whether it meets the original circuit requirements.
Where can I buy MAX307EUI+ online?
Use the Request a Quote form on this page to ask for MAX307EUI+ availability, minimum order quantity, and current lead time. The form connects the request directly with XAIPART and avoids presenting a potentially stale catalog figure as a live quotation. Include the desired package, quantity, and production schedule so the sourcing response can be matched to the actual assembly requirements.
What is the price of MAX307EUI+?
Use the Request a Quote form on this page for the current MAX307EUI+ quotation. Pricing can vary with quantity, packaging, and market conditions, so the structured quote workflow is more reliable than a static summary. Include the required quantity and target package in the request to obtain a response aligned with the production plan.
What is the lead time and stock status for MAX307EUI+?
Request the current MAX307EUI+ lead time and availability through the Request a Quote form on this page. The manufacturer lists the MAX307 family as production, but production status does not by itself confirm local stock, scheduled allocation, or shipment timing. Providing quantity, date code requirements, and packaging preferences enables a more useful sourcing response.
Does MAX307EUI+ meet RoHS and REACH requirements?
The MAX307EUI+ RoHS and REACH status should be confirmed from the current Analog Devices product documentation or the declaration associated with the exact ordering code. The family page identifies the MAX307 as a production device, but that statement alone does not establish every material-compliance field for every package suffix. Request the applicable compliance documentation when it is a mandatory procurement requirement.
What design considerations apply when routing high-impedance signals through MAX307EUI+?
High-impedance sources should be checked carefully because the multiplexer's parasitic capacitance, switch leakage, and source impedance can influence settling time and measurement accuracy. Place the MAX307EUI+ close to the ADC or measurement amplifier, keep traces short, and use guarding where appropriate. The documented on-resistance below 100 Ω also means the switch can contribute to gain error if the source impedance is comparable to that value.

工程參考資料,適用於 MAX307EUI+ — 比較、設計指引及合規資訊。

選型指南

Choose MAX307EUI+ for precision analog routing that requires two 8:1 selectors, less than 100 Ω on-resistance, matching within 5 Ω, and transition times below 250 ns. It is particularly appropriate for data-acquisition systems, automated test equipment, battery monitoring, and compact instrumentation where leakage and channel consistency matter. Consider MAX306EUI+ when its individual timing, leakage, logic, and signal-range limits satisfy the design and procurement needs. MAX307EUI and MAX307EUI+T are same-package family entries whose ordering suffix, temperature grade, and production conditions must be checked against the original BOM. No alternative should be approved solely from package and pin-count similarity; the manufacturer pin table, electrical limits, and exact ordering code must all be reviewed before substitution.

與替代品比較

參數 本產品 MAX306EUI+ MAX307EUI MAX307EUI+T
Package TSSOP-28 TSSOP-28 TSSOP-28 TSSOP-28
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Multiplexer Configuration Dual 8:1 Dual 8:1 Dual 8:1 Dual 8:1
Number of Circuits 2 circuits 2 circuits 2 circuits 2 circuits

主要差異化特點

  • Fast precision switching for dual-channel routing (對比MAX306EUI+)
  • Tightly controlled channel matching (對比MAX306EUI+)
  • Exact MAX307 family configuration (對比MAX307EUI)

設計說明

Place the MAX307EUI+ close to the ADC or analog measurement amplifier to minimize parasitic capacitance and reduce settling time. The switch contributes up to approximately 100 Ω of on-resistance, so source impedance should remain much lower when accurate gain is required. Use short traces, a continuous ground reference, and guarding around sensitive input nodes.

Route the two 8:1 selector sections according to the exact MAX306/MAX307 pin table and keep address-control traces away from high-impedance common-path traces. The TSSOP-28 footprint requires adequate lead clearance for soldering and inspection. Follow the manufacturer data sheet for input, output, and supply decoupling rather than relying on a generic multiplexer layout.

Do not assume that a TSSOP-28 multiplexer is automatically a drop-in replacement. Verify address-control polarity, input assignment, common-terminal connections, logic thresholds, supply range, leakage, and the maximum analog signal voltage. The MAX306EUI+ is a same-family candidate, but its timing and leakage requirements must be confirmed against the original circuit before release.

The MAX307EUI+ operates from 5 V to 30 V, so the supply must remain within the documented range during startup, transients, and fault conditions. Provide local supply decoupling and evaluate control-pin states during power sequencing. The manufacturer's data sheet should be used for the final capacitor values and recommended operating conditions.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The MAX307 family is listed as a production product, but exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated for the MAX307EUI+ ordering code. No automotive qualification is indicated for this catalog entry.

相關搜尋

MAX307EUI+ datasheet MAX307EUI+ pinout MAX307EUI+ datasheet pdf MAX307EUI+ equivalent MAX307EUI+ replacement MAX307EUI+ vs MAX306EUI+ MAX307EUI+ TSSOP-28 multiplexer MAX307EUI+ dual 8:1 analog switch MAX307EUI+ 100 ohm on resistance MAX307EUI+ application circuit MAX307EUI+ price MAX307EUI+ stock Analog Devices MAX307EUI+ MAX307 dual 8:1 multiplexer MAX307EUI+ precision multiplexer

相關元件與詞彙

Analog Devices Maxim Integrated MAX307EUI+ MAX307EUI MAX307EUI+T MAX306EUI+ MAX307 MAX306 analog multiplexer analog switch interface IC semiconductor dual 8:1 multiplexer CMOS 44 V silicon gate process on-resistance channel matching off-state leakage transition time TSSOP-28 TSSOP package family surface mount precision measurement data acquisition automated test equipment
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情