MAX307EUI+ - Dual 8:1 100Ω Analog Multiplexer | Analog Devices
料号: MAX307EUI+ ✓ 量产中MAX307EUI+ 概述
An analog multiplexer is an integrated switching network that connects one common signal path to multiple input channels. A dual 8:1 configuration provides two independent 8:1 selectors, allowing a precision measurement system to route two signal groups through the same downstream circuitry. Within the power-management hierarchy of semiconductor functions, the MAX307EUI+ belongs to the interface-IC and analog-switch category, where low resistance, low leakage, and predictable channel matching help preserve signal integrity.
The MAX307 family uses a monolithic CMOS process identified as an improved 44 V silicon gate process. Its on-resistance is specified below 100 Ω and remains flat over the specified analog signal range, with maximum variation of 7 Ω. Channel-to-channel matching is maintained within 5 Ω, reducing gain errors when different inputs are selected sequentially. Off-state leakage is less than 2.5 nA at +85°C, while transition time is below 250 ns.
The MAX307EUI+ is configured as two 8-to-1 analog multiplexers. This arrangement is useful in precision instrumentation, data acquisition, test systems, battery monitoring, and industrial control designs where multiple analog inputs must share a converter or measurement front end. The two selectors can also be used for differential routing when their common terminals and control signals are connected appropriately.
System integration requires attention to supply voltage, logic thresholds, signal range, input impedance, and off-channel behavior. Because the control inputs are digital while the switched paths carry analog signals, the device should be positioned close to the sensitive front end to minimize capacitive loading and trace pickup. Decoupling should follow the recommendations in the manufacturer data sheet.
For replacement decisions, package body size and pin count alone do not establish compatibility. A suitable drop-in part must also preserve the dual 8:1 topology, pin assignments, control logic, on-resistance behavior, voltage rating, and electrical limits. This page compares the documented MAX307-family alternatives and identifies which differences must be reviewed before changing the BOM.
This product documentation combines the manufacturer specifications with application-focused engineering guidance, helping designers evaluate routing performance, switching speed, leakage, package constraints, and practical drop-in replacement options rather than relying on a basic distributor catalog summary.
直接替换替代料: MAX307EUI+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MAX306EUI+
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MAX307EUI
✅ 直接替换📋 参考替代料(不在目录中)
MAX307EUI+T
✅ 直接替换📋 参考替代料(不在目录中)
MAX307EUI+ 规格参数
| Multiplexer Configuration | Dual 8:1 |
| Number of Circuits | 2 circuits |
| On-Resistance | <100 Ω |
| Channel-to-Channel On-Resistance Matching | <5 Ω |
| On-Resistance Variation Over Analog Signal Range | 7 Ω maximum |
| Off-State Input Leakage | <2.5 nA at +85°C |
| Transition Time | <250 ns |
| Supply Voltage Range | 5 V to 30 V |
| Process Technology | 44 V silicon gate CMOS process |
| 封装 | 28-pin TSSOP |
| 安装类型 | Surface mount |
| Manufacturer | Analog Devices / Maxim Integrated |
| 生命周期状态 | Production |
MAX307EUI+ 28-pin tssop 引脚配置指南
MAX307EUI+(28-pin tssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX307EUI+.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX307EUI+ 适用于 6 应用s: Precision Data Acquisition, Automated Test Equipment, Battery Cell Monitoring, Industrial Sensor Interface, Signal Conditioning Front End, Programmable Signal Routing.
Precision Data Acquisition
The MAX307EUI+ is suitable for routing multiple sensor or instrument outputs into a precision measurement chain. Each 8:1 section can connect eight analog inputs to a common path, while on-resistance below 100 Ω, channel matching within 5 Ω, and resistance variation limited to 7 Ω help limit channel-dependent gain errors. Its transition time below 250 ns supports rapid source selection. Place the device near the ADC input and use short, guarded traces so capacitance and leakage do not degrade high-impedance measurements.
推荐
Automated Test Equipment
The MAX307EUI+ can select test signals efficiently in automated measurement systems because its dual 8:1 topology provides two independent analog routers. Transition times below 250 ns allow the control sequence to move between test points rapidly, while the matched, flat on-resistance reduces amplitude variation as different channels are selected. The 28-pin TSSOP package supports compact instrument layouts. Account for the approximately 100 Ω maximum switch resistance when calculating divider ratios and settling behavior.
推荐
Battery Cell Monitoring
The dual 8:1 configuration makes the MAX307EUI+ useful for sequential battery-cell measurement, where a compact selector reduces the number of signal-routing components. Low off-state leakage below 2.5 nA at +85°C helps isolate unselected cells, and matched on-resistance within 5 Ω improves consistency between measurements. The 5 V to 30 V supply range supports industrial systems. Confirm the permitted analog signal range and ensure the selected common path cannot expose an input beyond its rating.
推荐
Industrial Sensor Interface
The MAX307EUI+ allows a controller to connect multiple analog sensors to one measurement amplifier or converter. Less than 100 Ω on-resistance is low enough for many sensor interfaces, and the 7 Ω maximum resistance variation helps maintain predictable signal scaling across the analog range. Sub-250 ns transitions support rapid sampling sequences. For high-impedance sensors, minimize trace length, maintain a stable reference return, and evaluate leakage and input capacitance together before finalizing the routing layout.
推荐
Signal Conditioning Front End
The MAX307EUI+ can place a selected sensor or source ahead of an instrumentation amplifier, filter, or ADC. Its low and tightly matched on-resistance reduces switching-induced amplitude changes, while the dual selector arrangement allows two signal groups to share downstream conditioning. This is useful in programmable instrumentation and process-control interfaces. The common output still requires the correct termination and protection for the expected source impedance and signal range.
推荐
Programmable Signal Routing
The MAX307EUI+ supports programmable routing in equipment that must connect one of several analog sources to a fixed downstream circuit. The dual 8:1 organization provides sixteen switched inputs in total when both sections are used, while transition time below 250 ns supports rapid control sequences. Flat on-resistance across the analog range improves source-to-source consistency. Use the manufacturer pin table to assign address controls and ensure unused or disabled channels are connected to a defined state.
推荐
推荐产品汇总
工程参考数据: MAX307EUI+ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX306EUI+ | MAX307EUI | MAX307EUI+T |
|---|---|---|---|---|
| Package | TSSOP-28 | TSSOP-28 | TSSOP-28 | TSSOP-28 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Multiplexer Configuration | Dual 8:1 | Dual 8:1 | Dual 8:1 | Dual 8:1 |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
关键差异点
- Fast precision switching for dual-channel routing (对比 MAX306EUI+)
- Tightly controlled channel matching (对比 MAX306EUI+)
- Exact MAX307 family configuration (对比 MAX307EUI)
设计说明
Place the MAX307EUI+ close to the ADC or analog measurement amplifier to minimize parasitic capacitance and reduce settling time. The switch contributes up to approximately 100 Ω of on-resistance, so source impedance should remain much lower when accurate gain is required. Use short traces, a continuous ground reference, and guarding around sensitive input nodes.
Route the two 8:1 selector sections according to the exact MAX306/MAX307 pin table and keep address-control traces away from high-impedance common-path traces. The TSSOP-28 footprint requires adequate lead clearance for soldering and inspection. Follow the manufacturer data sheet for input, output, and supply decoupling rather than relying on a generic multiplexer layout.
Do not assume that a TSSOP-28 multiplexer is automatically a drop-in replacement. Verify address-control polarity, input assignment, common-terminal connections, logic thresholds, supply range, leakage, and the maximum analog signal voltage. The MAX306EUI+ is a same-family candidate, but its timing and leakage requirements must be confirmed against the original circuit before release.
The MAX307EUI+ operates from 5 V to 30 V, so the supply must remain within the documented range during startup, transients, and fault conditions. Provide local supply decoupling and evaluate control-pin states during power sequencing. The manufacturer's data sheet should be used for the final capacitor values and recommended operating conditions.
合规信息
The MAX307 family is listed as a production product, but exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated for the MAX307EUI+ ordering code. No automotive qualification is indicated for this catalog entry.