Maxim Integrated

MAX3232CWE-TG068 - 3V-5.5V RS-232 Transceiver | Maxim

MPN: MAX3232CWE-TG068 ✓ فعال
3.0 V to 5.5 V Vdss 16-pin wide SOIC Package
MOQ: 1 |

MAX3232CWE-TG068 جائزہ

Maxim Integrated MAX3232CWE-TG068 is a low-power, true RS-232 transceiver IC supporting a 3.0 V to 5.5 V supply, data rates up to 1 Mbps, and dual RS-232 driver/receiver functions in a 16-pin wide SOIC package. It converts logic-level signals to RS-232 levels and converts incoming RS-232 signals back to logic levels, providing a compact interface between modern digital systems and legacy serial equipment.

An RS-232 transceiver is an interface IC within the broader hierarchy of transceiver IC, interface IC, and semiconductor. True RS-232 implementations include the voltage levels, slew behavior, and driver-receiver arrangement required by the RS-232 standard. The MAX3232 family is designed for equipment that requires bidirectional serial communication without the higher supply voltage traditionally associated with older RS-232 implementations.

The MAX3232CWE-TG068 operates from 3.0 V to 5.5 V and supports communication rates up to 1 Mbps. Its low-power design is suitable for portable, industrial-control, instrumentation, and embedded equipment where supply current and board area matter. The manufacturer datasheet describes a charge-pump-assisted true RS-232 architecture and specifies the use of four 0.1 uF capacitors, allowing the device to generate the required bipolar voltage levels from a single low-voltage supply.

The CWE package is a 16-pin wide SOIC intended for surface-mount assembly. This package provides more spacing between pins than a narrow SOIC, which can simplify routing and hand-soldering in equipment assembled with mixed analog and digital circuitry. Operating and electrical details such as the complete pin assignment, temperature range, receiver thresholds, driver slew rate, and exact capacitor tolerances must be confirmed in the manufacturer datasheet before releasing a production design.

Typical applications include RS-232 ports in industrial controllers, laboratory instruments, barcode and data-acquisition equipment, service interfaces, and embedded systems that communicate with legacy peripherals. The 1 Mbps capability supports data links faster than conventional low-speed serial ports, while the 3.0 V to 5.5 V supply range permits operation from common embedded and logic rails.

A critical implementation detail is capacitor placement: route the four 0.1 uF charge-pump capacitors with short, direct traces and maintain the ground return close to the device. Keep RS-232 driver outputs away from sensitive receiver inputs, use the package's defined supply and ground pins, and verify external connector protection according to the voltage tolerance and grounding requirements of the finished equipment.

This product page consolidates the verified electrical envelope, package information, sourcing status, and engineering guidance for the MAX3232CWE-TG068. It also distinguishes verified same-footprint alternatives from narrower-package options and highlights the package and capacitance details that most directly affect PCB implementation.

کے لیے ڈراپ اِن متبادل MAX3232CWE-TG068 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MAX3232CWE-TG068 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type, Supply Voltage Range.

Texas Instruments
Package: 16-pin SOIC
Product Type: RS-232 line-driver and receiver transceiver
Supply Voltage Range: 3 V to 5.5 V
موازنہ کریں MAX3232CWE-TG068 →

MAX3232CWE+

✅ ڈراپ-اِن
Analog Devices
📦 SOIC-16 (Wide)
Dual RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · RS-232 · 16-pin SOIC · Surface Mount

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MAX3232ECDW

✅ ڈراپ-اِن
Texas Instruments
📦 SOIC-16 (Wide)
RS-232 line-driver and receiver transceiver · 3 V to 5.5 V · 2 · 2 · RS-232 · TIA/EIA-232-F · ±15 kV IEC pin-to-pin · Integrated dual charge pump

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MAX328CWE

✅ ڈراپ-اِن
📦 SOIC-16 (Wide)
Lower supply-voltage floor than MAX3232CWE-TG068, approximately 0.5 V lower, while retaining a 16-pin wide SOIC interface package

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MAX3232CWE-TG068 تفصیلات

Product Type RS-232 transceiver interface IC
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
RS-232 Transceiver Count 2 drivers and 2 receivers
Charge-Pump Capacitor Requirement 4 x 0.1 uF
پیکیج 16-pin wide SOIC
ماؤنٹنگ ٹائپ Surface mount
Transceiver Type True RS-232 transceiver

MAX3232CWE-TG068 16-pin wide soic پن کنفیگریشن گائیڈ

MAX3232CWE-TG068 (16-pin wide soic پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

MAX3232CWE-TG068 کے لیے 16-pin wide soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX3232CWE-TG068.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MAX3232CWE-TG068 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Controller RS-232 Port, Test and Measurement Instrument, Data-Acquisition Equipment, Embedded Service Interface, Portable Diagnostic Device, Barcode and Labeling Equipment.

🏭

Industrial Controller RS-232 Port

The MAX3232CWE-TG068 fits an industrial controller that must communicate with legacy RS-232 equipment from a 3.0 V to 5.5 V control system. Its true RS-232 interface supports data rates up to 1 Mbps, allowing the controller to serve as a maintenance, configuration, or supervisory link without requiring a separate high-voltage interface supply. The dual-driver and dual-receiver arrangement provides two RS-232 channels in one 16-pin wide SOIC. Four 0.1 uF charge-pump capacitors should be placed close to the device according to the manufacturer datasheet. A production design should also include defined logic-side grounding, connector-level protection, and verified common-mode behavior for the attached equipment.

📟

Test and Measurement Instrument

The MAX3232CWE-TG068 is useful in laboratory instruments that expose a PC-compatible RS-232 configuration port for calibration, logging, or instrument control. Its 3.0 V to 5.5 V supply range integrates easily with modern embedded control systems, while the 1 Mbps maximum data rate supports faster command and measurement-data transfers than conventional low-speed serial links. The wide SOIC package offers adequate lead spacing for mixed-signal boards. Place the four required 0.1 uF charge-pump capacitors close to their associated pins, and route the cable-side outputs away from sensitive analog sections. Verify logic levels, grounding, and ESD protection at the external connector.

🖥️

Data-Acquisition Equipment

The MAX3232CWE-TG068 can provide a compact command and status connection between a data-acquisition controller and an external computer or service terminal. Its low 3.0 V to 5.5 V operating range reduces the need for a separate RS-232 supply rail, while the capability for rates up to 1 Mbps accommodates burst-oriented status and configuration traffic. The two transmitters and two receivers allow more than one RS-232 node on the board, subject to the individual line and protocol requirements. Use the manufacturer charge-pump capacitor values and placement exactly, provide local supply decoupling, and add appropriate protection at any user-accessible connector. A logic-level cross-reference should be included in the schematic to simplify future board revisions.

🔧

Embedded Service Interface

The MAX3232CWE-TG068 is appropriate for embedded products that require a service or configuration port using an RS-232 connector. Its 3.0 V minimum supply allows operation from common embedded rails, and its up-to-1-Mbps capability provides useful margin for firmware download logs, configuration exchanges, and diagnostic traffic. The wide SOIC package can simplify assembly where mixed component pitches are used. Maintain short charge-pump capacitor connections, avoid sharing sensitive signal returns with charge-pump currents, and define connector behavior when the port is disconnected or exposed to an external cable. For production equipment, incorporate a documented logic-level interface so that a future equivalent can be evaluated without changing the surrounding processor hardware.

📱

Portable Diagnostic Device

The MAX3232CWE-TG068 can support a portable diagnostic device that connects to a host computer through an RS-232 service cable. The 3.0 V to 5.5 V operating range is compatible with battery-derived and portable-system rails, and the low-power MAX3232 family avoids requiring a dedicated RS-232 voltage source. Its 1 Mbps capability is more than adequate for diagnostic commands and event logs while leaving margin for firmware update traffic. Validate the complete current draw for the intended operating mode and use the manufacturer's four 0.1 uF capacitor arrangement. Because an external cable introduces ESD and ground-transient risks, place protection at the connector boundary and verify the final system against its applicable interface requirements.

📦

Barcode and Labeling Equipment

The MAX3232CWE-TG068 suits barcode scanners, label printers, and production-floor equipment that use an RS-232 host connection. The 3.0 V to 5.5 V supply range simplifies integration with embedded controllers, and the 1 Mbps capability provides ample bandwidth for scan data, configuration commands, and status reporting. The 16-pin wide SOIC package supports mixed assembly methods and provides practical pin spacing compared with a narrow-SOIC version. Follow the manufacturer datasheet for the four 0.1 uF charge-pump capacitors and their placement. Keep the protected cable interface separated from sensitive logic, use a low-impedance ground path, and verify connector protection for the industrial environment in which the barcode equipment will operate.

What is the MAX3232CWE-TG068?
The MAX3232CWE-TG068 is a Maxim Integrated true RS-232 transceiver IC with two drivers and two receivers in a 16-pin wide SOIC package. According to the Analog Devices MAX3232 product page and manufacturer datasheet, it operates from 3.0 V to 5.5 V, supports data rates up to 1 Mbps, and uses four 0.1 uF capacitors for its charge-pump circuitry. It is intended for bidirectional RS-232 connections between modern logic-level equipment and legacy serial peripherals.
What is the operating voltage of MAX3232CWE-TG068?
The MAX3232CWE-TG068 operates from 3.0 V to 5.5 V. This range allows the transceiver to use common embedded and logic rails instead of requiring a higher RS-232 supply. The Analog Devices MAX3232 product page identifies the device as a 3.0 V to 5.5 V low-power transceiver. Confirm the power rail and decoupling arrangement against the manufacturer datasheet before connecting it to a board whose voltage tolerances differ from the finished-equipment requirements.
How fast can MAX3232CWE-TG068 transmit RS-232 data?
The MAX3232CWE-TG068 supports RS-232 data rates up to 1 Mbps. The Analog Devices product page identifies the MAX3232 family as a true RS-232 transceiver family for operation up to 1 Mbps. Actual system throughput depends on baud-rate division, cable characteristics, receiver margin, grounding, and the connected equipment. Use the manufacturer datasheet timing and transition limits when validating a high-speed link.
What capacitors does MAX3232CWE-TG068 require?
The MAX3232CWE-TG068 uses four 0.1 uF charge-pump capacitors according to the manufacturer datasheet description. Place these capacitors close to their associated pins and use short, low-loop-area traces. The exact capacitor connections, dielectric recommendation, and tolerance should follow the pin-description table and typical application circuit in the manufacturer datasheet. Incorrect capacitor placement can increase supply ripple, reduce noise margin, or impair startup behavior.
Where can I download the MAX3232CWE-TG068 datasheet PDF?
The authoritative MAX3232CWE-TG068 documentation is available through the Analog Devices MAX3232 product page linked on this page. The product page provides the manufacturer datasheet, product selection table, and supporting documentation for the MAX3232 family. The CWE ordering code identifies the 16-pin wide SOIC version, so use the pin table and package drawing associated with the CWE variant when assigning PCB nets.
Where can I find the MAX3232CWE-TG068 pinout?
The MAX3232CWE-TG068 pinout is defined by the CWE pin-description table in the Analog Devices MAX3232 manufacturer datasheet. The device uses a 16-pin wide SOIC package and includes pins for the 3.0 V to 5.5 V supply, ground, charge-pump capacitors, driver outputs, and receiver inputs. Use the datasheet table rather than inferring connections from another MAX3232 package because CWE and narrow-SOIC order codes can differ in body width.
Where to buy MAX3232CWE-TG068 online?
Use the Request a Quote form on this page to request MAX3232CWE-TG068 availability, current sourcing information, and order handling for the exact 16-pin wide SOIC ordering code. The manufacturer lists the MAX3232 family as production, while the TG068 suffix identifies a specific ordering and packaging configuration. Confirm the complete suffix, package, quantity, and delivery requirements when submitting the request.
What is the price of MAX3232CWE-TG068?
Current MAX3232CWE-TG068 pricing is best obtained through the Request a Quote form on this page. The form is the appropriate route for an exact-Suffix, quantity-specific quotation and avoids confusion with base-family, narrow-SOIC, or tape-and-reel ordering codes. Quote requests should identify the required quantity, package form, target delivery location, and whether multiple lot or date-code requirements must be accommodated.
What is the lead time for MAX3232CWE-TG068?
Request the current lead time and minimum-order quantity through the Request a Quote form on this page. Lead time can vary with the exact ordering suffix, manufacturing source, quantity, and required traceability. The Analog Devices product page identifies MAX3232 as a production family, but that family-level status does not by itself guarantee immediate stock for every CWE package configuration.
Is MAX3232CWE-TG068 in stock?
Submit an availability request using the Request a Quote form on this page to confirm stock for the exact MAX3232CWE-TG068 configuration. The form should state the quantity, package form, target date, and any lot-control requirements. Because the TG068 suffix represents a specific ordering configuration, checking only the base MAX3232 family listing may not establish availability for the exact assembly option.
What is the best drop-in replacement for MAX3232CWE-TG068?
MAX3232CWE+ is the closest identified drop-in candidate because it retains the same MAX3232 family, 3.0 V to 5.5 V supply range, 1 Mbps capability, and 16-pin wide SOIC package. MAX3232ECDW is another same-footprint candidate identified in a published comparison. MAX328CWE may also fit electrically, but its lower supply-voltage floor requires verification. Validate the complete pin table, capacitor connections, and operating-temperature grade before substitution.
Can MAX3232ECDW replace MAX3232CWE-TG068?
MAX3232ECDW is a potential same-footprint replacement because the identified comparison places it against MAX3232CWE+ in the same 16-pin wide SOIC class. Before exchanging the parts, verify that the exact D W package drawing, pin names, charge-pump capacitor connections, supply range, and temperature grade match the target board. Pin-compatible packages can still differ in ordering code, lead finish, qualification, or lifecycle status.
When should I choose MAX3232CWE-TG068 over MAX3232CWE+?
Choose MAX3232CWE-TG068 when procurement specifically requires the TG068 ordering configuration, including its associated packaging or sourcing designation. Choose MAX3232CWE+ when the base CWE ordering code is acceptable and its commercial terms better fit the production plan. The manufacturer identifies the MAX3232 family as production, so the decision is primarily exact order-code availability, traceability, and packaging requirements rather than a change in core transceiver functionality.
MAX3232CWE-TG068 vs MAX3232CWE+ - which is better for an industrial controller?
Both parts represent the MAX3232 3.0 V to 5.5 V, up-to-1-Mbps true RS-232 interface in a 16-pin wide SOIC, so core communication performance is closely aligned. MAX3232CWE-TG068 is preferable when its exact ordering configuration is required; MAX3232CWE+ is preferable when it offers better availability or simpler procurement. For either choice, confirm the industrial temperature grade and lifecycle status required by the controller specification.
What are the key specifications of MAX3232CWE-TG068 that engineers should know?
The key specifications are a 3.0 V to 5.5 V operating range, data rates up to 1 Mbps, two RS-232 drivers and two receivers, and a 16-pin wide SOIC package. The charge-pump implementation requires four 0.1 uF capacitors according to the manufacturer datasheet description. These characteristics make the device appropriate for compact, low-voltage systems that need bidirectional true RS-232 connectivity.
What can replace MAX3232CWE-TG068?
The identified replacement candidates are MAX3232CWE+, MAX3232ECDW, and MAX328CWE, all represented in the 16-pin wide SOIC class. MAX3232CWE+ provides the closest family-level alignment with the target, while MAX3232ECDW offers another same-footprint option and MAX328CWE offers a lower-voltage-floor solution. Each candidate still requires board-level review of pin functions, capacitor values, temperature grade, and supply constraints before production use.
Is MAX3232CWE-TG068 suitable for a low-voltage embedded system?
The MAX3232CWE-TG068 is suitable for many low-voltage embedded systems because it operates from 3.0 V to 5.5 V and supports communication rates up to 1 Mbps. The system must still provide correct charge-pump capacitors, local decoupling, reliable grounding, and suitable RS-232 connector protection. For battery-powered equipment, check the complete load-current profile from the manufacturer datasheet before finalizing the power budget.

کے لیے انجینئرنگ ریفرنس ڈیٹا MAX3232CWE-TG068 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose MAX3232CWE-TG068 when the system requires the exact TG068 ordering configuration and a 3.0 V to 5.5 V, up-to-1-Mbps true RS-232 interface in a 16-pin wide SOIC. MAX3232CWE+ is the closest functional and mechanical candidate when that base ordering code is acceptable, making it preferable for straightforward production continuity or easier procurement. Consider MAX3232ECDW after reviewing its complete pin and temperature specifications against the target board. MAX328CWE may suit a design requiring a somewhat higher minimum supply, but its approximately 0.5 V higher floor and any data-rate differences must fit the system. Do not select the narrow-SOIC MAX3232CSE+ or MAX3232EESE+T for direct replacement without changing the PCB footprint. In every case, verify charge-pump capacitor values, logic levels, temperature grade, connector protection, and lifecycle requirements against the manufacturer datasheet before production release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MAX3232CWE+ MAX3232ECDW MAX328CWE
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package SOIC-16 (Wide) SOIC-16 (Wide) SOIC-16 (Wide) SOIC-16 (Wide)
Interface Standard True RS-232 True RS-232 True RS-232 RS-232
Mounting Type Surface mount Surface mount Surface mount Surface mount

اہم امتیازی خصوصیات

  • Exact 3.0 V to 5.5 V low-voltage RS-232 operation (بمقابلہMAX328CWE)
  • Close family-level functional match (بمقابلہMAX3232CWE+)
  • Wide-body package aligns with the target footprint (بمقابلہMAX3232CSE+)

ڈیزائن نوٹس

Place the four required 0.1 uF charge-pump capacitors directly beside their associated IC pins. Keep each capacitor connection short and symmetrical, and provide a nearby supply bypass capacitor on the device power pin. Avoid routing the charge-pump current path through areas carrying receiver inputs or low-level analog signals. The manufacturer datasheet pin table should be used to assign each capacitor because different MAX3232 package order codes must not be treated as interchangeable by name alone.

Do not substitute a narrow-SOIC MAX3232 variant for this wide-body CWE footprint without redesigning the PCB pads. MAX3232CSE+ and MAX3232EESE+T are identified as narrow-SOIC versions, so their lead spacing differs even though the family functions are related. Verify the package drawing, pin numbering, and exposed lead geometry before considering any ordering-code change. For an assembled PCB, use the manufacturer CWE drawing as the dimensional authority.

Separate the cable-side RS-232 nets from sensitive logic and analog traces. Keep driver outputs away from receiver inputs, especially on bidirectional RS-232 links where both directions share a connector. Route both transmit and receive pairs with consistent return paths, and evaluate the completed board for ground bounce when a connected device changes its ground reference. A connector-side protection network should be selected using the finished equipment's cable length and interface exposure rather than a generic component value.

Budget the MAX3232 supply current together with the load presented by the connected logic circuitry and external interface protection. The 3.0 V to 5.5 V operating range simplifies rail selection but does not remove the need for accurate source impedance and local decoupling. Confirm the low-power operating mode required by the application against the manufacturer datasheet. If the board sleeps between transactions, verify whether the remote RS-232 connection remains active and how that condition affects total system power.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The MAX3232 family is listed as production by Analog Devices. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the exact MAX3232CWE-TG068 configuration require confirmation from the manufacturer or its current compliance documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-09 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MAX3232CWE-TG068 datasheet MAX3232CWE-TG068 pinout MAX3232CWE-TG068 datasheet pdf MAX3232CWE-TG068 equivalent MAX3232CWE-TG068 replacement MAX3232CWE-TG068 price MAX3232CWE-TG068 stock Maxim Integrated MAX3232CWE-TG068 MAX3232CWE-TG068 3V 5.5V 1Mbps MAX3232CWE-TG068 SOIC-16 pinout MAX3232CWE-TG068 RS-232 transceiver MAX3232CWE-TG068 vs MAX3232CWE+ MAX3232CWE-TG068 four 0.1uF capacitors MAX3232CWE-TG068 industrial controller MAX3232CWE-TG068 pin assignment

متعلقہ اجزاء اور اصطلاحات

Maxim Integrated Analog Devices MAX3232CWE-TG068 MAX3232CWE+ MAX3232ECDW MAX328CWE MAX3232CSE+ MAX3232EESE+T RS-232 transceiver transceiver IC interface IC semiconductor true RS-232 logic-level serial interface charge-pump circuit SOIC-16 wide SOIC surface-mount package 3.0 V to 5.5 V supply 1 Mbps data rate 0.1 uF capacitor industrial control test and measurement equipment barcode equipment RS-232 interface
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں