Texas Instruments

MC1458PG4 - Dual 30V 1MHz Op Amp | Texas Instruments

MPN: MC1458PG4 ✓ فعال
30 V Vdss 8-pin PDIP, 0.300 inch pitch Package
MOQ: 1 |

MC1458PG4 جائزہ

Texas Instruments MC1458PG4 is a dual general-purpose operational amplifier designed for a 30 V maximum supply and 1 MHz gain-bandwidth operation, supplied in an 8-pin PDIP package. Each channel provides independent signal amplification for analog control, instrumentation, buffering, and signal-conditioning circuits where a conventional through-hole dual op amp is preferred.

An operational amplifier, commonly called an op amp, is an analog amplifier with very high open-loop gain. When negative feedback surrounds the device, that gain becomes precise and stable, allowing an analog signal to be amplified according to the surrounding resistor network. A dual operational amplifier contains two amplifier sections in one package, making it useful when a board needs two related analog functions without using two separate IC packages.

The MC1458PG4's defining performance figures are its two-channel configuration, 30 V supply capability, and 1 MHz gain-bandwidth product. These characteristics position it as a general-purpose amplifier rather than a precision or high-speed signal-processing device. The 8-pin PDIP format also supports conventional through-hole assembly, breadboard prototyping, educational designs, and maintenance of existing industrial hardware.

Each amplifier section supports common analog-building functions such as voltage following, non-inverting amplification, inverting amplification, summation, subtraction, filtering, and level conditioning. Negative feedback determines the closed-loop gain, while resistor and capacitor values establish the operating characteristics of the surrounding circuit. The dual organization allows paired operations in one package, including two voltage followers or an inverting stage followed by another conditioning stage.

Typical uses include low-frequency industrial control loops, sensor-signal conditioning, audio preamplification at modest bandwidths, educational analog-circuit demonstrations, and legacy equipment repairs. The 1 MHz gain-bandwidth figure is particularly relevant for general-purpose signal paths rather than wideband video, high-fidelity audio, or precision instrumentation. System designers should calculate closed-loop bandwidth from the required gain and confirm that signal amplitude and slew-rate requirements remain compatible.

For PCB implementation, place the device so the eight leads can be inspected and routed cleanly, maintain separation between input and output paths, and provide local supply bypassing where practical. Stable operation depends on suitable feedback compensation, adequate supply bypassing, and keeping source impedances low enough for the selected gain. The two channels are intended for similar analog environments and do not eliminate the need to verify common-mode, output-swing, and stability limits in the finished design.

This product reference combines the manufacturer's key amplifier ratings, package information, sourcing guidance, documented drop-in alternatives, and practical selection advice. It is intended to help engineers identify whether the MC1458PG4 fits an existing 8-pin dual-op-amp design and what electrical and layout checks to complete before production release.

کے لیے ڈراپ اِن متبادل MC1458PG4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MC1458PG4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, RoHS Status.

Texas Instruments
Package: 8-pin PDIP
RoHS Status: unknown
موازنہ کریں MC1458PG4 →

MC1458P

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Texas Instruments
📦 8-pin PDIP
2 channels · Dual general-purpose operational amplifier · 30 V · 1 MHz

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

RC4558P

✅ ڈراپ-اِن
📦 8-pin PDIP
Comparable dual general-purpose DIP format and approximately 1 MHz class; detailed offset and bias-current parameters require review

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MC1458PG4 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Dual general-purpose operational amplifier
Number of Amplifier Channels 2 channels
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 1 MHz
پیکیج 8-pin PDIP, 0.300 inch pitch
ماؤنٹنگ ٹائپ Through-hole
RoHS اسٹیٹس Compliant

MC1458PG4 پن کنفیگریشن

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
پن 1 OFFSET NULL 1 — Offset null connection for amplifier section 1
پن 2 IN1- — Inverting input for amplifier section 1
پن 3 IN1+ — Non-inverting input for amplifier section 1
پن 4 V- — Negative supply connection
پن 5 OFFSET NULL 2 — Offset null connection for amplifier section 2
پن 6 OUT1 — Output for amplifier section 1
پن 7 OUT2 — Output for amplifier section 2
پن 8 V+ — Positive supply connection

عام استعمالات

MC1458PG4 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Audio Preamplifier and Mixer Stage, Voltage Follower and Buffering, Analog Difference Amplifier, Legacy Control-System Maintenance, Analog Education and Prototyping.

🏭

Industrial Sensor Signal Conditioning

The MC1458PG4 suits low-frequency industrial sensor-conditioning paths that require two amplifier sections in one 8-pin PDIP device. Each channel can implement a non-inverting or inverting stage around the MC1458's 1 MHz gain-bandwidth product, allowing a low-level sensor signal to be scaled before an ADC or controller input. The 30 V supply ceiling also fits many legacy 24 V industrial analog boards. Check input bias current and common-mode limits against the sensor impedance, and keep sensitive input traces short and away from switching nodes.

🎧

Audio Preamplifier and Mixer Stage

For conventional low-bandwidth audio preamplification, the MC1458PG4 can provide independent gain or mixing functions in a single 8-pin PDIP package. Its 1 MHz gain-bandwidth product is appropriate for many voice-band and general-purpose audio paths, while the 30 V supply rating supports higher-voltage legacy signal stages. The design should use negative feedback to set the closed-loop gain and should verify output swing, slew rate, and channel-to-channel behavior for the intended signal level.

📡

Voltage Follower and Buffering

The two MC1458PG4 amplifier sections can each operate as a voltage follower, creating useful buffers between high-impedance sources and downstream measurement or control circuits. A follower isolates the source from the next stage without intentionally setting voltage gain, while the 1 MHz gain-bandwidth product gives ample bandwidth for many low-frequency measurement signals. Use low-value feedback resistors where noise or bias-current effects are important, and verify that source and load conditions remain within the amplifier's input and output limits.

🔧

Analog Difference Amplifier

MC1458PG4 is suitable for a difference-amplifier arrangement in which two analog inputs are compared and the result is scaled for an ADC, comparator interface, or control loop. Its dual-section architecture supports paired gain and subtraction operations, while the 30 V maximum supply rating is useful in legacy ±15 V or lower single-supply systems. Resistor matching determines common-mode rejection, so precision applications should account for tolerance and temperature drift rather than relying on the amplifier's nominal 1 MHz bandwidth alone.

🛠️

Legacy Control-System Maintenance

The MC1458PG4 is a practical candidate for repairing or extending legacy industrial and laboratory control boards that use a dual general-purpose op amp in an 8-pin PDIP footprint. Its 1 MHz gain-bandwidth product and 30 V supply rating match the operating class of many older analog-control designs. Confirm the original pin assignments, supply tolerances, output-load conditions, and stability requirements before replacement. Through-hole construction also simplifies socketed diagnosis and board-level rework in equipment that no longer uses modern surface-mount packages.

🧪

Analog Education and Prototyping

MC1458PG4 supports laboratory exercises and prototypes involving voltage followers, inverting amplifiers, summing networks, integrators, and active filters. Two amplifiers in one 8-pin DIP package allow students to compare channels and construct multistage analog functions without immediately moving to a surface-mount package. Because the device is a general-purpose 1 MHz amplifier, experiments should emphasize feedback, biasing, signal-range limits, and practical measurements rather than precision instrumentation or wideband performance.

What is the MC1458PG4?
The MC1458PG4 is a Texas Instruments dual general-purpose operational amplifier rated for a 30 V maximum supply and a 1 MHz gain-bandwidth product. It comes in an 8-pin PDIP package. According to the Texas Instruments MC1458 product page, the device contains two amplifier sections for general-purpose analog signal conditioning, buffering, amplification, and feedback-controlled circuit designs.
Where can I download the MC1458PG4 datasheet PDF?
The MC1458 datasheet and ordering information are available from the official Texas Instruments MC1458 product page at https://www.ti.com/product/MC1458. The manufacturer identifies the MC1458 as a dual, 30 V, 1 MHz operational amplifier. Use the datasheet linked from that page to confirm the complete electrical limits, pin assignments, package drawings, and ordering options before finalizing a circuit.
Where can I buy MC1458PG4 online?
Use the Request a Quote form on this page to request MC1458PG4 pricing, availability, and lead time from XAIPART. The requested part is a Texas Instruments dual general-purpose operational amplifier in an 8-pin PDIP package. A complete purchasing decision should also account for the exact package suffix, production quantity, assembly method, and the required delivery schedule.
What is the price of MC1458PG4?
MC1458PG4 pricing depends on order quantity, package suffix, current inventory, and purchasing terms. Use the Request a Quote form on this page for a current quotation. The form is the appropriate route for price confirmation because market pricing changes and a static listing can become inconsistent with the quantity and delivery requirements of a new design.
What is the lead time for MC1458PG4?
Request the current MC1458PG4 lead time through the Request a Quote form on this page. Lead time can vary with the number of units, package handling requirements, and current supply conditions. For a production release, include the required delivery date and annual usage in the request so the quotation can be matched to the actual assembly schedule.
Is MC1458PG4 in stock?
Current MC1458PG4 stock should be confirmed through the Request a Quote form on this page. The device is specified as an 8-pin PDIP dual operational amplifier from Texas Instruments, so confirm that the quoted inventory carries the same MC1458PG4 suffix rather than another package or grade variant. The request should state the quantity and target delivery date.
What are the key specifications of MC1458PG4 that engineers should know?
The MC1458PG4 is a dual, general-purpose operational amplifier with a 30 V maximum supply and a 1 MHz gain-bandwidth product in an 8-pin PDIP package. These three points define its basic design class and board footprint. According to the Texas Instruments MC1458 product page, it is intended for ordinary analog amplification and signal-conditioning tasks rather than specialized precision or high-speed roles.
What is the MC1458PG4 pinout?
The MC1458PG4 uses eight through-hole leads in a PDIP package. Its two sections are intended for independent general-purpose amplifier configurations, including voltage followers and feedback-based gain stages. Before assigning PCB tracks, use the pin-description table and package drawing in the manufacturer datasheet to confirm each numbered lead and the power connections for the selected ordering option.
MC1458PG4 vs MC1458P - which is better?
MC1458PG4 and MC1458P are members of the same MC1458 dual-amplifier family and use the 8-pin PDIP format for conventional through-hole assembly. Their headline electrical ratings are the same 30 V maximum supply and 1 MHz gain-bandwidth class, giving a 0% difference in those published figures. Select the exact orderable suffix identified by your BOM, approved-parts list, or legacy equipment documentation.
MC1458PG4 vs RC4558P - which is better for a legacy analog circuit?
MC1458PG4 is the safer primary choice when continuity with the original Texas Instruments MC1458 design is important, because the manufacturer identifies the part as a dual, 30 V, 1 MHz operational amplifier. RC4558P is a documented cross-family comparison candidate with a similar DIP format, but its detailed offset, bias, and output characteristics should be checked against the original circuit before substitution.
When should I choose MC1458PG4 over MC1458P?
Choose MC1458PG4 when the exact orderable code, package handling, or procurement documentation calls for that suffix. Choose MC1458P when it is the approved entry for a conventional PDIP assembly and its ordering details match the target design. Because both belong to the MC1458 family, the principal decision is normally the approved suffix rather than a change in the amplifier's basic 30 V, 1 MHz function.
Is MC1458PG4 suitable for low-frequency sensor signal conditioning?
MC1458PG4 is generally suitable for low-frequency sensor signal conditioning when the required closed-loop gain and bandwidth fit a 1 MHz gain-bandwidth-product amplifier. The device can support inverting, non-inverting, difference, and buffering arrangements. Check input offset, bias current, common-mode range, output swing, and slew-rate requirements in the manufacturer datasheet before using it with high-impedance sensors.
What can replace MC1458PG4?
MC1458P is the closest same-family drop-in candidate identified for the MC1458PG4 because both use the 8-pin PDIP format and share the 30 V, 1 MHz headline ratings. RC4558P is another documented comparison candidate, but it requires a more detailed electrical review. Do not treat a similar DIP outline as sufficient proof; verify pin assignments, offset behavior, bias current, common-mode range, and output swing.
Can RC4558P replace MC1458PG4 without changing the PCB?
RC4558P may fit the same 8-pin DIP footprint, but PCB fit alone does not guarantee drop-in equivalence. MC1458PG4 is specified as a dual, 30 V, 1 MHz amplifier, while RC4558P requires comparison of offset voltage, input bias current, common-mode range, output swing, slew rate, and supply-current behavior. Approve the substitution only after reviewing both manufacturer datasheets and testing the intended circuit.
What is the best Analog Devices equivalent for MC1458PG4?
No specific Analog Devices dual operational amplifier is established here as a verified drop-in replacement for MC1458PG4. Analog Devices and Burr-Brown are identified as participants in the MC1458 cross-reference ecosystem, but a valid 8-pin PDIP equivalent with matching pinout and electrical limits must still be selected from current manufacturer documentation. Request a quotation for the approved equivalent through the Request a Quote form on this page.

کے لیے انجینئرنگ ریفرنس ڈیٹا MC1458PG4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose MC1458PG4 when maintaining a legacy design that specifically calls for the Texas Instruments MC1458 family, an 8-pin PDIP footprint, a 30 V maximum supply, and a 1 MHz gain-bandwidth product. MC1458P is the closest same-family drop-in candidate when its approved suffix and procurement status fit the assembly; its published 30 V and 1 MHz headline ratings match the target. Consider RC4558P only when the original circuit tolerates its offset, bias-current, common-mode, output-swing, and supply-current characteristics. It should not replace MC1458PG4 solely because the package outline is similar. The MC1458PG4 is preferable when exact manufacturer lineage, established documentation, and known dual-section functionality are more important than broadening the approved-part list. For new high-precision, low-noise, high-speed, or very low-offset applications, select a modern amplifier class instead of forcing this general-purpose device into a more demanding signal chain.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MC1458P RC4558P
Brand Texas Instruments Texas Instruments Analog Devices
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP
Amplifier Configuration Dual Dual Dual
Product Class General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Mounting Style Through-hole Through-hole Through-hole

اہم امتیازی خصوصیات

  • Closest same-family ordering alternative (بمقابلہMC1458P)
  • Established manufacturer lineage for legacy designs (بمقابلہRC4558P)
  • Two independent amplifier sections in one through-hole package (بمقابلہMC1458P)

ڈیزائن نوٹس

Keep each feedback resistor and its associated input or output connection as short as practical. In a dual amplifier, maintain separation between channel 1 and channel 2 signal paths, particularly when one channel handles a high-level signal and the other handles a low-level sensor input. Place the device to provide an unobstructed ground return and avoid routing sensitive inputs beneath power-supply traces or near high-current switching paths.

Design the supply network for the amplifier's maximum 30 V operating envelope rather than assuming the nominal board voltage is safe under transients. Confirm absolute maximum limits, common-mode input range, and output-swing behavior in the manufacturer datasheet. Add local supply bypassing close to the device and use separate, low-impedance routing for each supply rail so current transients do not create voltage disturbances across the analog signal path.

Do not treat an 8-pin DIP outline as proof that every dual operational amplifier is interchangeable. Before fitting MC1458P or RC4558P, compare offset null availability, input polarity, supply pins, output assignments, input bias current, common-mode range, output swing, and stability with feedback. In particular, a circuit designed around one amplifier's offset-null arrangement may require component or layout changes even when the package can physically fit.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The MC1458PG4 is listed as RoHS compliant. No explicit REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is established for this exact ordering option.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-11 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MC1458PG4 datasheet MC1458PG4 pinout MC1458PG4 datasheet pdf MC1458PG4 specifications Texas Instruments MC1458PG4 MC1458PG4 30V op amp MC1458PG4 1MHz amplifier MC1458PG4 PDIP package MC1458PG4 equivalent MC1458PG4 replacement MC1458PG4 vs RC4558P MC1458PG4 price MC1458PG4 stock MC1458PG4 application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments MC1458PG4 MC1458P RC4558P Analog Devices dual operational amplifier operational amplifier op amp analog amplifier feedback amplifier general-purpose amplifier gain-bandwidth product 1 MHz 30 V maximum supply 8-pin PDIP DIP package through-hole technology SMD alternative voltage follower inverting amplifier non-inverting amplifier sensor signal conditioning industrial control RoHS semiconductor
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں