MC9S12B128VFUE - 16-Bit 25MHz HCS12 MCU 128KB Flash | NXP
MPN: MC9S12B128VFUE ✓ فعالMC9S12B128VFUE جائزہ
An HCS12 microcontroller is a 16-bit CISC (Complex Instruction Set Computer) MCU built around the HCS12 CPU core, falling under the broader category of microcontrollers -> embedded processors -> microprocessors -> semiconductors. The HCS12 architecture extends the earlier HC12 with enhanced instruction set, hardware debug (BDM) support, and richer peripheral integration, while keeping code compatibility with the legacy HC12 instruction set. The S12B sub-family specifically targets cost-sensitive automotive body and chassis applications where moderate Flash density and a rich peripheral mix are needed.
Key features of the MC9S12B128VFUE include 128 KB Flash program memory, 4 KB RAM, 1 KB EEPROM, an 8-channel 10-bit ADC, multiple CAN / SCI / SPI / I2C interfaces, and an operating voltage range of 2.5 V to 5 V. The on-chip HCS12 core delivers deterministic interrupt response and integrated background debug mode (BDM), enabling in-circuit programming and real-time development without external emulators. The 80-QFP (PQFP) package supports easy manufacturing with conventional surface-mount processes.
The MC9S12B128VFUE implements the HCS12 CISC core with a 16-bit ALU, 16-bit index registers and a unified address space that simplifies C compiler code generation. Its peripheral set is managed by the System Integration Module (SIM), which handles clock generation, interrupt prioritization, chip-select routing and external bus configuration. Internal phase-locked loop (PLL) and on-chip voltage regulator allow flexible oscillator selection while keeping the core on a stable internal rail.
Typical applications include automotive body controllers, climate/HVAC modules, instrument clusters, lighting control modules, seat and door-zone modules, and industrial CAN nodes. The integrated CAN 2.0 A/B controller makes it especially well-suited for in-vehicle networks where LIN/CAN gateway functions are required.
When designing with the MC9S12B128VFUE, route the BDM signals (BKGD, MODC) to a 6-pin standard debug header to keep development and field-update paths open, and pay close attention to decoupling near each VDD/VSS pair on the 80-QFP package.
This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design considerations that complement the manufacturer datasheet and help engineers shorten the component-selection cycle.
کے لیے ڈراپ اِن متبادل MC9S12B128VFUE — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MC9S12B128VFUE (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Supply Voltage, Package, Core Processor, PWM Channels, Data Bus Width.
MC9S12B64VFUE
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S12B256VFUE
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S12A128CFUE
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S12DG128VFUE
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S12KG128VFUE
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MC9S12B128VFUE زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | HCS12 (CISC, 16-bit) |
| Family | S12B |
| Program Memory | 128 KB Flash (128K x 8) |
| RAM | 4 KB |
| EEPROM | 1 KB |
| Maximum CPU Frequency | 25 MHz |
| ڈیٹا بس چوڑائی | 16 bit |
| Operating Voltage | 2.5 V to 5 V |
| پیکیج / کیس | 80-QFP (14 x 14 mm, PQFP, tray) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| ADC | 8-channel, 10-bit |
| Communication Interfaces | CAN 2.0, SCI (UART), SPI, I2C |
| Debug Interface | BDM (Background Debug Mode) |
| Peripheral Series | S12B |
MC9S12B128VFUE 80-qfp (14 x 14 mm, pqfp, tray) پن کنفیگریشن گائیڈ
MC9S12B128VFUE (80-qfp (14 x 14 mm, pqfp, tray) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC9S12B128VFUE.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MC9S12B128VFUE کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Control Module, Instrument Cluster and Lighting Control, HVAC and Climate Control Module, Door and Seat Zone Module, Industrial CAN Node / PLC Sub-Controller, Battery Management Slave Module.
Automotive Body Control Module
The MC9S12B128VFUE is well-matched to automotive body controllers because it integrates a CAN 2.0 A/B controller alongside SCI, SPI and I2C ports, plus an 8-channel 10-bit ADC for switch and sensor reads. With 128 KB of Flash it absorbs body-controller firmware plus diagnostic routines without external memory. Operating from 2.5 V to 5 V, it interfaces directly with 5 V automotive sensor rails after the on-chip regulator conditions the core.
تجویز کردہ
Instrument Cluster and Lighting Control
In instrument clusters and lighting modules, the MC9S12B128VFUE drives PWM outputs for backlight dimming and indicator LEDs while reading rotary encoders via timer capture channels. Its 25 MHz HCS12 core delivers deterministic updates for CAN message arbitration, and the 80-QFP package is large enough for easy thermal management inside instrument housings. The 4 KB RAM buffers display refresh tables, and the integrated 10-bit ADC reads vehicle illumination sensors.
تجویز کردہ
HVAC and Climate Control Module
Climate control modules use the MC9S12B128VFUE's ADC channels to read temperature sensors and its PWM outputs to drive blower motor FETs. The HCS12 core handles closed-loop control loops in software without offloading to DSP hardware, keeping the BOM small. The wide 2.5-5 V supply range tolerates the transients typical of HVAC blower-motor circuits, and CAN connectivity links the module to body-network gateways.
تجویز کردہ
Door and Seat Zone Module
Door-zone and seat-control modules use the MC9S12B128VFUE to multiplex mirror, window and seat-position switches across a single CAN/LIN segment. The part's multiple SCI channels serve LIN master duties for peripheral actuators, while the EEPROM block stores seat-position memory without external storage. The 80-QFP package's generous lead pitch simplifies through-hole rework during service.
تجویز کردہ
Industrial CAN Node / PLC Sub-Controller
Industrial CAN nodes adopt the MC9S12B128VFUE because it provides a hardware CAN 2.0 stack on-chip, freeing the application CPU from bit-banging. The 128 KB Flash holds protocol stacks plus custom control logic, and the 10-bit ADC is sufficient for most sensor interfaces on the factory floor. Operating temperature behaviour inherited from the S12B family suits cabinet-mounted equipment.
تجویز کردہ
Battery Management Slave Module
As a slave cell-monitoring MCU in a battery management system, the MC9S12B128VFUE aggregates cell voltages via its ADC and forwards them over CAN to the master BMS controller. The 5 V tolerant ADC inputs pair directly with typical cell-sense resistor dividers, while the HCS12 BDM port supports field firmware updates without pack disassembly. EEPROM provides non-volatile storage for cell-balancing parameters and lifetime counters.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MC9S12B128VFUE — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MC9S12B64VFUE | MC9S12B256VFUE | MC9S12A128CFUE | MC9S12DG128VFUE | MC9S12KG128VFUE |
|---|---|---|---|---|---|---|
| Package | 80-QFP (14x14) | 80-QFP (14x14) - same | 80-QFP (14x14) - same | 80-QFP (14x14) - same | 80-QFP (14x14) - same | 80-QFP (14x14) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12 CISC 16-bit | HCS12 CISC 16-bit | HCS12 CISC 16-bit | HCS12 CISC 16-bit | HCS12 CISC 16-bit | HCS12 CISC 16-bit |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Flash Memory | 128 KB | 64 KB (-50%) | 256 KB (+100%) | 128 KB (same) | 128 KB (same) | 128 KB (same) |
| Sub-family | S12B | S12B | S12B | S12A | S12DG | S12KG |
| Integrated CAN 2.0 Controller | Yes | Yes | Yes | Yes | Yes (extended) | Yes (extended) |
| ADC | 8-ch 10-bit | 8-ch 10-bit | 8-ch 10-bit | 8-ch 10-bit | 8-ch 10-bit | 8-ch 10-bit |
| Operating Voltage | 2.5 V to 5 V | 2.5 V to 5 V | 2.5 V to 5 V | 2.5 V to 5 V | 2.5 V to 5 V | 2.5 V to 5 V |
اہم امتیازی خصوصیات
- Higher Flash density than B64 sibling (بمقابلہMC9S12B64VFUE)
- Cost-optimised S12B sub-family vs richer S12DG (بمقابلہMC9S12DG128VFUE)
- Pin-compatible with A128CFUE for footprint reuse (بمقابلہMC9S12A128CFUE)
ڈیزائن نوٹس
Place a 100 nF decoupling capacitor on every VDD/VSS pair of the 80-QFP, plus a single 10 uF bulk tantalum or ceramic close to the package. The HCS12 core draws short current spikes at bus-clock edges, so keep the loop between each VDD/VSS pair and its bypass cap to a minimum - typical guidance is below 3 mm trace length to keep high-frequency impedance low.
Route BKGD and MODC signals to a 6-pin standard BDM header (BKGD, MODC, GND, VDD, RESET, NC) using short, parallel traces to preserve signal integrity during background debug operations. Place the BDM header at the board edge to keep the in-circuit programming clip accessible, and avoid routing noisy switching signals across the BDM header footprint.
Do not leave the MODC pin floating during reset - its sampled logic level selects between single-chip and expanded modes. A floating MODC can cause unpredictable boot behaviour. Tie MODC to GND through a 10 kohm resistor for single-chip mode or directly to VDD for expanded mode, and verify the level with the datasheet's reset mode selection table.
When using the integrated CAN 2.0 controller, always pair it with an external transceiver such as the TJA1050 or MC33662. The on-chip CAN module only handles the protocol layer; the physical bus requires a transceiver for differential drive, dominant/recessive arbitration and bus fault tolerance. Keep the CANH/CANL traces as a 100 ohm differential pair on the PCB.
تعمیل کی معلومات
RoHS / REACH / AEC-Q100 / lead-free / halogen-free status was not present in the Verified Web Data and is therefore marked 'unknown'. Please verify with the manufacturer's declaration before designing into regulated automotive or RoHS-only bills of materials.
