MC9S12C64CPBE - 16-Bit 25MHz 64KB MCU | NXP Semiconductors
MPN: MC9S12C64CPBE ✗ اختتامِ زندگیMC9S12C64CPBE جائزہ
An HCS12 microcontroller is a flash-based 16-bit embedded controller built around the CPU12 core. It belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors. The S12C family combines flash program memory, digital control peripherals, communication interfaces, and timing resources on a single device, allowing a compact controller to manage system logic without a separate external memory or processor.
The MC9S12C64CPBE provides 64 KB of flash, a 25 MHz operating frequency, a 16-bit CPU12 architecture, and a 52-pin surface-mount package. Its integrated phase-locked loop circuit supports flexible clock generation for systems that require controlled timing relationships between peripherals. The 2.97 V to 5.5 V external operating-supply range also allows use in both 3.3 V and 5 V system environments.
The HCS12 platform combines a conventional embedded-control core with dedicated peripheral resources, making it suitable for automotive network nodes, industrial controllers, communications equipment, and cost-sensitive embedded products. Its 64 KB flash capacity provides room for application firmware, while the 52-pin LQFP package supports conventional surface-mount assembly and external access to communications and control signals.
Typical uses include automotive body and network controllers, industrial interface modules, serial communication equipment, embedded gateways, and general-purpose automation products. For a new design, the family architecture is especially useful when an established 16-bit control platform, deterministic embedded firmware, and a moderate flash-memory requirement are priorities rather than the processing density of a 32-bit microcontroller.
Before schematic capture, verify the exact peripheral pin assignment, alternate-function multiplexing, clock requirements, reset behavior, and programming connections against the MC9S12C64 family documentation. The broad 2.97 V to 5.5 V supply range simplifies rail selection, but the power architecture, decoupling, clock stability, and I/O voltage limits still require application-specific review.
This product page combines the exact MC9S12C64CPBE identification, verified package and memory characteristics, sourcing guidance, a same-package replacement candidate, and practical design guidance. It helps engineers identify the correct device before moving to the manufacturer datasheet, cross-reference records, and PCB implementation details.
کے لیے ڈراپ اِن متبادل MC9S12C64CPBE — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MC9S12C64CPBE (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Core, Flash Memory, Lifecycle Status.
MC9S12GC64MPBE
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MC9S12C64CPBE زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 16-bit HCS12 microcontroller |
| Core | HCS12 CPU12 |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Architecture | 16-bit |
| External Supply Voltage Range | 2.97 V to 5.5 V |
| Internal Digital Supply | Generated by on-chip bandgap-based voltage regulator |
| Clock Support | Phase-lock loop (PLL) |
| پیکیج | 52-pin LQFP (10 x 10 mm) |
| ماؤنٹنگ ٹائپ | Surface mount |
| S12C Family Pin Options | 48-pin, 52-pin, and 80-pin |
| Target Application | General-purpose industrial and automotive network applications |
| Program Memory Type | Flash |
| Product Lifecycle Status | NRND |
MC9S12C64CPBE 52-pin lqfp (10 x 10 mm) پن کنفیگریشن گائیڈ
MC9S12C64CPBE (52-pin lqfp (10 x 10 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC9S12C64CPBE.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MC9S12C64CPBE کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Network Controller, Industrial Serial Interface Module, Embedded Communications Gateway, General-Purpose Automation Controller, Cost-Sensitive Embedded Control, Legacy Platform Maintenance.
Automotive Network Controller
The MC9S12C64CPBE fits an automotive network node that requires a 16-bit embedded controller, 64 KB of flash, and a compact 52-pin LQFP package. Its 25 MHz CPU12 core can handle protocol servicing and deterministic control tasks, while the 2.97 V to 5.5 V external supply range accommodates common vehicle electronic power environments. The on-chip bandgap-based regulator supplies the internal digital rail, while the PLL supports controlled clock generation. A production design must confirm the exact qualification status, electrical limits, automotive test requirements, and software compatibility with NXP before release.
تجویز کردہ
Industrial Serial Interface Module
The MC9S12C64CPBE is suitable for an industrial serial interface module that needs local protocol handling without a higher-complexity processor. Its 64 KB of flash can hold communication drivers, configuration logic, diagnostics, and application firmware, while the 16-bit HCS12 architecture supports compact embedded control. The 52-pin LQFP package leaves access to the device’s communications, timing, and control resources, and the 2.97 V to 5.5 V supply range supports 3.3 V or 5 V system rails. Validate peripheral multiplexing, interrupt priorities, and electrical isolation requirements in the hardware design.
تجویز کردہ
Embedded Communications Gateway
The MC9S12C64CPBE can serve as the control processor in a cost-sensitive communications gateway where 64 KB of flash is sufficient for protocol conversion and device management. Its 25 MHz CPU12 core provides deterministic execution for message handling, while the HCS12 peripheral set can support serial communications and system control tasks. The 52-pin LQFP package is compatible with high-density surface-mount assembly, and the 2.97 V to 5.5 V operating range simplifies integration with industrial or automotive power rails. Firmware, watchdog behavior, memory endurance, and communications timing should be assessed for the intended duty cycle.
تجویز کردہ
General-Purpose Automation Controller
The MC9S12C64CPBE fits compact automation equipment that combines sequence control, interface management, and local diagnostics in one microcontroller. Its 16-bit CPU12 architecture and 25 MHz clock are appropriate for general-purpose embedded control, while 64 KB of flash accommodates control logic and configuration firmware. The device’s 52-pin LQFP package supports compact PCB layouts, and its broad external supply range enables integration into 3.3 V or 5 V control electronics. Designers should confirm timer, communication, and I/O requirements directly against the pin table and account for industrial temperature and EMC requirements.
تجویز کردہ
Cost-Sensitive Embedded Control
The MC9S12C64CPBE is appropriate when an established 16-bit embedded architecture and 64 KB of flash meet the product requirements without the overhead of a 32-bit processor. The HCS12 CPU12 core runs at 25 MHz, and the device integrates the internal digital supply regulator and PLL within a 52-pin LQFP package. This combination supports compact control boards in industrial and automotive networks where cost, space, and known software tooling are significant considerations. Because the part is NRND, new designs should balance those benefits against the availability of current NXP products.
تجویز کردہ
Legacy Platform Maintenance
The MC9S12C64CPBE is particularly relevant to maintenance and continuation programs for equipment built around the HCS12 platform. Its 25 MHz CPU12 core, 64 KB flash configuration, and 52-pin LQFP footprint allow service engineers to source a device matching an established board rather than redesigning the assembly. The broad 2.97 V to 5.5 V external supply range supports many existing 3.3 V and 5 V designs. For long-term support, review the NXP product-change notices, validate the exact programmed-device revision, and confirm long-term availability before committing to a maintenance production run.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MC9S12C64CPBE — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MC9S12GC64MPBE |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 52-pin LQFP (10 x 10 mm) | 52-pin LQFP (10 x 10 mm) |
| CPU Architecture | 16-bit HCS12 | 16-bit HCS12 |
| Maximum Frequency | 25 MHz | 25 MHz |
| Flash Memory | 64 KB (64K x 8) | 64 KB (64K x 8) |
| Mounting Type | Surface mount | Surface mount |
اہم امتیازی خصوصیات
- Exact 64 KB flash and 25 MHz configuration (بمقابلہMC9S12GC64MPBE)
- Identical 52-pin LQFP land-pattern class (بمقابلہMC9S12GC64MPBE)
- Established 2.97 V to 5.5 V external supply design (بمقابلہMC9S12GC64MPBE)
ڈیزائن نوٹس
Design the external supply for the 2.97 V to 5.5 V operating range and distinguish it from the internally regulated digital rail. Place the required input and decoupling capacitors close to the corresponding power pins using the manufacturer’s recommended application circuit. Account for startup current, I/O-port loading, regulator behavior, and supply tolerances rather than assuming that a nominal 3.3 V or 5 V rail guarantees correct operation in every condition.
Route the 52-pin LQFP footprint according to the NXP package drawing, including any exposed-pad connection specified for that package variant. Keep sensitive clock and programming nets short, provide clean return paths, and follow the reference circuit for decoupling. Review alternate-function multiplexing before assigning every signal; several peripheral functions can share a pin, so an apparently valid schematic assignment may require a different port configuration.
Do not treat the same package size as proof of complete interchangeability. MC9S12GC64MPBE matches the listed core, frequency, flash capacity, and 52-pin LQFP format, but firmware, initialization, peripheral revisions, and device identity can still differ. Compare the full family documentation, confirm the programmed part identifier, and run hardware and firmware regression tests before approving a substitution.
تعمیل کی معلومات
The manufacturer identifies automotive and industrial network applications as target markets, but the exact ordering variant’s AEC-Q100, RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the supplied records. Automotive qualification must be confirmed for the exact ordering code.