NXP Semiconductors

MC9S12C64CPBE - 16-Bit 25MHz 64KB MCU | NXP Semiconductors

MPN: MC9S12C64CPBE ✗ 停產
2.97 V to 5.5 V Vdss 52-pin LQFP (10 x 10 mm) Package 25 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

MC9S12C64CPBE 概覽

NXP Semiconductors MC9S12C64CPBE is a 16-bit HCS12 microcontroller operating at 25 MHz with 64 KB of flash memory in a 52-pin LQFP package measuring 10 x 10 mm. The device supports an external supply range of 2.97 V to 5.5 V and includes an on-chip bandgap voltage regulator for the internal digital supply. It is designed for cost- and space-sensitive general-purpose industrial and automotive networking applications.

An HCS12 microcontroller is a flash-based 16-bit embedded controller built around the CPU12 core. It belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors. The S12C family combines flash program memory, digital control peripherals, communication interfaces, and timing resources on a single device, allowing a compact controller to manage system logic without a separate external memory or processor.

The MC9S12C64CPBE provides 64 KB of flash, a 25 MHz operating frequency, a 16-bit CPU12 architecture, and a 52-pin surface-mount package. Its integrated phase-locked loop circuit supports flexible clock generation for systems that require controlled timing relationships between peripherals. The 2.97 V to 5.5 V external operating-supply range also allows use in both 3.3 V and 5 V system environments.

The HCS12 platform combines a conventional embedded-control core with dedicated peripheral resources, making it suitable for automotive network nodes, industrial controllers, communications equipment, and cost-sensitive embedded products. Its 64 KB flash capacity provides room for application firmware, while the 52-pin LQFP package supports conventional surface-mount assembly and external access to communications and control signals.

Typical uses include automotive body and network controllers, industrial interface modules, serial communication equipment, embedded gateways, and general-purpose automation products. For a new design, the family architecture is especially useful when an established 16-bit control platform, deterministic embedded firmware, and a moderate flash-memory requirement are priorities rather than the processing density of a 32-bit microcontroller.

Before schematic capture, verify the exact peripheral pin assignment, alternate-function multiplexing, clock requirements, reset behavior, and programming connections against the MC9S12C64 family documentation. The broad 2.97 V to 5.5 V supply range simplifies rail selection, but the power architecture, decoupling, clock stability, and I/O voltage limits still require application-specific review.

This product page combines the exact MC9S12C64CPBE identification, verified package and memory characteristics, sourcing guidance, a same-package replacement candidate, and practical design guidance. It helps engineers identify the correct device before moving to the manufacturer datasheet, cross-reference records, and PCB implementation details.

直接替換替代品,適用於 MC9S12C64CPBE — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MC9S12C64CPBE (相同外形與佔位) — 差異在於 Package, Core, Flash Memory, Lifecycle Status.

NXP Semiconductors
Package: 52-pin LQFP
Flash Memory: 32 KB
Lifecycle Status: NRND
比較對象 MC9S12C64CPBE →
NXP Semiconductors
Package: 52-LQFP (10x10 mm)
Core: HCS12 (16-bit CISC)
Lifecycle Status: NRND (Not Recommended for New Designs)
比較對象 MC9S12C64CPBE →

MC9S12GC64MPBE

✅ 直接替換
NXP Semiconductors
📦 52-pin LQFP (10 x 10 mm)
HCS12 (16-bit CISC) · S12GC (MC9S12GC family) · 64 KB Flash · 4 KB · 1 KB · 25 MHz · 2.97 V to 5.5 V · On-chip bandgap VREG generating VDD

聯絡詢價

查看資料表 →

MC9S12C64CPBE 最大額定值與電氣特性

Product Type 16-bit HCS12 microcontroller
Core HCS12 CPU12
Maximum CPU Frequency 25 MHz
Flash Memory 64 KB (64K x 8)
Architecture 16-bit
External Supply Voltage Range 2.97 V to 5.5 V
Internal Digital Supply Generated by on-chip bandgap-based voltage regulator
Clock Support Phase-lock loop (PLL)
封裝 52-pin LQFP (10 x 10 mm)
安裝類型 Surface mount
S12C Family Pin Options 48-pin, 52-pin, and 80-pin
Target Application General-purpose industrial and automotive network applications
Program Memory Type Flash
Product Lifecycle Status NRND

MC9S12C64CPBE 52-pin lqfp (10 x 10 mm) 腳位配置指南

MC9S12C64CPBE(52-pin lqfp (10 x 10 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

MC9S12C64CPBE 的 52-pin lqfp (10 x 10 mm) 封裝腳位圖

無詳細腳位定義資料: MC9S12C64CPBE.

請參閱 資料表 以查看完整腳位配置。

典型應用

MC9S12C64CPBE 適用於 6 應用s: Automotive Network Controller, Industrial Serial Interface Module, Embedded Communications Gateway, General-Purpose Automation Controller, Cost-Sensitive Embedded Control, Legacy Platform Maintenance.

🚗

Automotive Network Controller

The MC9S12C64CPBE fits an automotive network node that requires a 16-bit embedded controller, 64 KB of flash, and a compact 52-pin LQFP package. Its 25 MHz CPU12 core can handle protocol servicing and deterministic control tasks, while the 2.97 V to 5.5 V external supply range accommodates common vehicle electronic power environments. The on-chip bandgap-based regulator supplies the internal digital rail, while the PLL supports controlled clock generation. A production design must confirm the exact qualification status, electrical limits, automotive test requirements, and software compatibility with NXP before release.

🏭

Industrial Serial Interface Module

The MC9S12C64CPBE is suitable for an industrial serial interface module that needs local protocol handling without a higher-complexity processor. Its 64 KB of flash can hold communication drivers, configuration logic, diagnostics, and application firmware, while the 16-bit HCS12 architecture supports compact embedded control. The 52-pin LQFP package leaves access to the device’s communications, timing, and control resources, and the 2.97 V to 5.5 V supply range supports 3.3 V or 5 V system rails. Validate peripheral multiplexing, interrupt priorities, and electrical isolation requirements in the hardware design.

🌐

Embedded Communications Gateway

The MC9S12C64CPBE can serve as the control processor in a cost-sensitive communications gateway where 64 KB of flash is sufficient for protocol conversion and device management. Its 25 MHz CPU12 core provides deterministic execution for message handling, while the HCS12 peripheral set can support serial communications and system control tasks. The 52-pin LQFP package is compatible with high-density surface-mount assembly, and the 2.97 V to 5.5 V operating range simplifies integration with industrial or automotive power rails. Firmware, watchdog behavior, memory endurance, and communications timing should be assessed for the intended duty cycle.

🔧

General-Purpose Automation Controller

The MC9S12C64CPBE fits compact automation equipment that combines sequence control, interface management, and local diagnostics in one microcontroller. Its 16-bit CPU12 architecture and 25 MHz clock are appropriate for general-purpose embedded control, while 64 KB of flash accommodates control logic and configuration firmware. The device’s 52-pin LQFP package supports compact PCB layouts, and its broad external supply range enables integration into 3.3 V or 5 V control electronics. Designers should confirm timer, communication, and I/O requirements directly against the pin table and account for industrial temperature and EMC requirements.

🧩

Cost-Sensitive Embedded Control

The MC9S12C64CPBE is appropriate when an established 16-bit embedded architecture and 64 KB of flash meet the product requirements without the overhead of a 32-bit processor. The HCS12 CPU12 core runs at 25 MHz, and the device integrates the internal digital supply regulator and PLL within a 52-pin LQFP package. This combination supports compact control boards in industrial and automotive networks where cost, space, and known software tooling are significant considerations. Because the part is NRND, new designs should balance those benefits against the availability of current NXP products.

🔧

Legacy Platform Maintenance

The MC9S12C64CPBE is particularly relevant to maintenance and continuation programs for equipment built around the HCS12 platform. Its 25 MHz CPU12 core, 64 KB flash configuration, and 52-pin LQFP footprint allow service engineers to source a device matching an established board rather than redesigning the assembly. The broad 2.97 V to 5.5 V external supply range supports many existing 3.3 V and 5 V designs. For long-term support, review the NXP product-change notices, validate the exact programmed-device revision, and confirm long-term availability before committing to a maintenance production run.

What is the MC9S12C64CPBE?
The MC9S12C64CPBE is an NXP Semiconductors 16-bit HCS12 microcontroller with a 25 MHz CPU12 core, 64 KB of flash memory, and a 52-pin LQFP package. According to the MC9S12C64 family documentation, the S12C family is intended for cost- and space-sensitive general-purpose industrial and automotive network applications.
What is the operating voltage of the MC9S12C64CPBE?
The MC9S12C64CPBE supports a 2.97 V to 5.5 V external supply range. The NXP product information describes an on-chip bandgap-based voltage regulator that generates the internal digital supply voltage, allowing the controller to operate from common 3.3 V and 5 V system rails while keeping the external supply requirement distinct from the internally regulated rail.
How much flash memory does the MC9S12C64CPBE have?
The MC9S12C64CPBE contains 64 KB of flash program memory, organized as 64K x 8. DigiKey identifies the device as a 16-bit, 25 MHz HCS12 microcontroller with 64 KB flash, while the NXP family documentation identifies the S12C as a flash-based MCU family offered in 48-, 52-, and 80-pin configurations.
What package and mounting style does MC9S12C64CPBE use?
The MC9S12C64CPBE uses a 52-pin LQFP package measuring 10 x 10 mm. The listed package is intended for surface-mount assembly. Confirm the pin names, power pins, programming connections, and exposed pad treatment in the manufacturer package drawing before finalizing the PCB footprint.
Where can I download the MC9S12C64CPBE datasheet?
The official MC9S12C64CPBE product page is the preferred starting point for the datasheet and related product-change information. The family documentation is also available through the MC9S12C64 datasheet listing. Use the device-specific pin table and electrical characteristics when designing the power, clock, programming, and peripheral circuits.
Where can I find the MC9S12C64CPBE pinout?
The MC9S12C64CPBE pinout is documented in the manufacturer’s 52-pin package drawing and pin-description tables. Use the NXP product page to access the family documentation, then map each 52-pin LQFP position to the required power, ground, reset, clock, programming, and peripheral functions before releasing the PCB layout.
What can replace the MC9S12C64CPBE on the same PCB?
MC9S12GC64MPBE is a same-package replacement candidate for the MC9S12C64CPBE. The comparison records identify both parts as 16-bit, 25 MHz HCS12 microcontrollers with 64 KB flash in a 52-pin LQFP package. Because device revisions can alter peripheral behavior and software expectations, review the complete datasheet and migration documentation before production use.
Is MC9S12GC64MPBE a drop-in replacement for MC9S12C64CPBE?
MC9S12GC64MPBE is the closest same-package drop-in candidate identified for the MC9S12C64CPBE because both use a 52-pin LQFP package and are listed with a 16-bit HCS12 core, 25 MHz operation, and 64 KB flash. A hardware footprint match does not eliminate software, mask, peripheral, or qualification checks, so treat it as a qualified-design decision rather than an automatic substitution.
When should I choose the MC9S12C64CPBE over another 16-bit MCU?
Choose the MC9S12C64CPBE when the design needs an established 16-bit HCS12 control platform, 25 MHz processing, 64 KB of on-chip flash, and a 52-pin LQFP footprint. It is particularly appropriate for industrial or automotive networking products where the S12C family architecture, existing firmware investment, and available peripheral resources outweigh the density of a newer 32-bit MCU.
Is MC9S12C64CPBE suitable for industrial and automotive networking?
The MC9S12C64CPBE is suitable for general-purpose industrial and automotive network designs at the family level. The NXP documentation identifies those markets as target applications and notes the S12C family’s focus on cost and space. For a production automotive product, confirm the exact ordering variant, qualification status, and all electrical requirements with NXP.
Does the MC9S12C64CPBE include a phase-locked loop?
Yes, the MC9S12C64CPBE includes a phase-lock loop circuit. NXP describes the PLL as part of the S12C family’s clocking capabilities, alongside the on-chip bandgap-based voltage regulator and the 2.97 V to 5.5 V external supply range. PLL settings and permissible bus frequencies should be taken from the family clock documentation.
Is MC9S12C64CPBE currently active or NRND?
The MC9S12C64CPBE is listed by NXP as NRND, meaning it is not recommended for new designs. Existing supported programs may still use the device, but new product development should evaluate current NXP options unless legacy compatibility, tooling, certification, or supply continuity makes the established MC9S12C64CPBE the practical choice.
Where can I buy MC9S12C64CPBE and check its lead time?
Use the Request a Quote form on this page to request MC9S12C64CPBE pricing, stock confirmation, minimum order quantity, and current lead time. Quote requests keep commercial terms aligned with the exact 52-pin LQFP ordering code MC9S12C64CPBE and help distinguish available production quantities from generic family-level listings.
What is the price of MC9S12C64CPBE?
Pricing for the MC9S12C64CPBE depends on order quantity, supply status, and current commercial terms. Use the Request a Quote form on this page for a unit-price and volume-break response for the exact MPN. The part is marked NRND by NXP, so availability should be confirmed for the planned production horizon rather than inferred from family-level inventory.
How do MC9S12C64CPBE and MC9S12GC64MPBE differ?
The MC9S12C64CPBE and MC9S12GC64MPBE share the listed core, speed, memory, and package characteristics: 16-bit HCS12 operation at 25 MHz, 64 KB flash, and a 52-pin LQFP package. Their functional differences require comparison of the full manufacturer documentation, especially peripheral revisions, clock behavior, initialization, and legacy software support, before treating either part as interchangeable.

工程參考資料,適用於 MC9S12C64CPBE — 比較、設計指引及合規資訊。

選型指南

Choose the MC9S12C64CPBE when maintaining an existing HCS12 design, preserving known firmware and tooling, or sourcing the exact 52-pin LQFP device for a qualified industrial or automotive network product. Its documented 25 MHz CPU12 core, 64 KB flash, 2.97 V to 5.5 V external supply range, internal voltage regulator, and PLL make it a practical choice for established platforms. Consider MC9S12GC64MPBE when the same core speed, flash size, and 52-pin footprint meet the PCB requirement, but complete a full hardware and software migration review because peripheral or revision differences may remain. Because the MC9S12C64CPBE is NRND, new designs should also compare current NXP microcontrollers against performance, toolchain, long-term availability, and qualification requirements rather than standardizing on an aging family without a migration plan.

與替代品比較

參數 本產品 MC9S12GC64MPBE
Brand NXP Semiconductors NXP Semiconductors
Package 52-pin LQFP (10 x 10 mm) 52-pin LQFP (10 x 10 mm)
CPU Architecture 16-bit HCS12 16-bit HCS12
Maximum Frequency 25 MHz 25 MHz
Flash Memory 64 KB (64K x 8) 64 KB (64K x 8)
Mounting Type Surface mount Surface mount

主要差異化特點

  • Exact 64 KB flash and 25 MHz configuration (對比MC9S12GC64MPBE)
  • Identical 52-pin LQFP land-pattern class (對比MC9S12GC64MPBE)
  • Established 2.97 V to 5.5 V external supply design (對比MC9S12GC64MPBE)

設計說明

Design the external supply for the 2.97 V to 5.5 V operating range and distinguish it from the internally regulated digital rail. Place the required input and decoupling capacitors close to the corresponding power pins using the manufacturer’s recommended application circuit. Account for startup current, I/O-port loading, regulator behavior, and supply tolerances rather than assuming that a nominal 3.3 V or 5 V rail guarantees correct operation in every condition.

Route the 52-pin LQFP footprint according to the NXP package drawing, including any exposed-pad connection specified for that package variant. Keep sensitive clock and programming nets short, provide clean return paths, and follow the reference circuit for decoupling. Review alternate-function multiplexing before assigning every signal; several peripheral functions can share a pin, so an apparently valid schematic assignment may require a different port configuration.

Do not treat the same package size as proof of complete interchangeability. MC9S12GC64MPBE matches the listed core, frequency, flash capacity, and 52-pin LQFP format, but firmware, initialization, peripheral revisions, and device identity can still differ. Compare the full family documentation, confirm the programmed part identifier, and run hardware and firmware regression tests before approving a substitution.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer identifies automotive and industrial network applications as target markets, but the exact ordering variant’s AEC-Q100, RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the supplied records. Automotive qualification must be confirmed for the exact ordering code.

資料驗證日期: 2026-11-15 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MC9S12C64CPBE datasheet MC9S12C64CPBE pinout MC9S12C64CPBE datasheet pdf MC9S12C64CPBE specifications MC9S12C64CPBE equivalent MC9S12C64CPBE replacement MC9S12C64CPBE vs MC9S12GC64MPBE MC9S12C64CPBE footprint MC9S12C64CPBE price MC9S12C64CPBE stock NXP MC9S12C64CPBE MC9S12C64CPBE 52 pin LQFP

相關元件與詞彙

NXP Semiconductors MC9S12C64CPBE MC9S12GC64MPBE HCS12 CPU12 S12C 16-bit microcontroller embedded microcontroller microcontroller semiconductor 64 KB flash memory 25 MHz 2.97 V to 5.5 V bandgap voltage regulator phase-lock loop PLL 52-pin LQFP LQFP surface mount industrial network applications automotive network applications NRND RoHS REACH AEC-Q100
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情