MC9S12C64CPBE - 16-Bit 25MHz 64KB MCU | NXP Semiconductors
부품 번호: MC9S12C64CPBE ✗ 단종MC9S12C64CPBE 개요
An HCS12 microcontroller is a flash-based 16-bit embedded controller built around the CPU12 core. It belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors. The S12C family combines flash program memory, digital control peripherals, communication interfaces, and timing resources on a single device, allowing a compact controller to manage system logic without a separate external memory or processor.
The MC9S12C64CPBE provides 64 KB of flash, a 25 MHz operating frequency, a 16-bit CPU12 architecture, and a 52-pin surface-mount package. Its integrated phase-locked loop circuit supports flexible clock generation for systems that require controlled timing relationships between peripherals. The 2.97 V to 5.5 V external operating-supply range also allows use in both 3.3 V and 5 V system environments.
The HCS12 platform combines a conventional embedded-control core with dedicated peripheral resources, making it suitable for automotive network nodes, industrial controllers, communications equipment, and cost-sensitive embedded products. Its 64 KB flash capacity provides room for application firmware, while the 52-pin LQFP package supports conventional surface-mount assembly and external access to communications and control signals.
Typical uses include automotive body and network controllers, industrial interface modules, serial communication equipment, embedded gateways, and general-purpose automation products. For a new design, the family architecture is especially useful when an established 16-bit control platform, deterministic embedded firmware, and a moderate flash-memory requirement are priorities rather than the processing density of a 32-bit microcontroller.
Before schematic capture, verify the exact peripheral pin assignment, alternate-function multiplexing, clock requirements, reset behavior, and programming connections against the MC9S12C64 family documentation. The broad 2.97 V to 5.5 V supply range simplifies rail selection, but the power architecture, decoupling, clock stability, and I/O voltage limits still require application-specific review.
This product page combines the exact MC9S12C64CPBE identification, verified package and memory characteristics, sourcing guidance, a same-package replacement candidate, and practical design guidance. It helps engineers identify the correct device before moving to the manufacturer datasheet, cross-reference records, and PCB implementation details.
드롭인 대체품: MC9S12C64CPBE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S12C64CPBE (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core, Flash Memory, Lifecycle Status.
MC9S12GC64MPBE
✅ 드롭인가격 문의
데이터시트 보기 →MC9S12C64CPBE 최대 정격 & 전기적 특성
| Product Type | 16-bit HCS12 microcontroller |
| Core | HCS12 CPU12 |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Architecture | 16-bit |
| External Supply Voltage Range | 2.97 V to 5.5 V |
| Internal Digital Supply | Generated by on-chip bandgap-based voltage regulator |
| Clock Support | Phase-lock loop (PLL) |
| 패키지 | 52-pin LQFP (10 x 10 mm) |
| 실장 유형 | Surface mount |
| S12C Family Pin Options | 48-pin, 52-pin, and 80-pin |
| Target Application | General-purpose industrial and automotive network applications |
| Program Memory Type | Flash |
| Product Lifecycle Status | NRND |
MC9S12C64CPBE 52-pin lqfp (10 x 10 mm) 핀 구성 가이드
MC9S12C64CPBE(52-pin lqfp (10 x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S12C64CPBE.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S12C64CPBE 적합 용도: 6 애플리케이션s: Automotive Network Controller, Industrial Serial Interface Module, Embedded Communications Gateway, General-Purpose Automation Controller, Cost-Sensitive Embedded Control, Legacy Platform Maintenance.
Automotive Network Controller
The MC9S12C64CPBE fits an automotive network node that requires a 16-bit embedded controller, 64 KB of flash, and a compact 52-pin LQFP package. Its 25 MHz CPU12 core can handle protocol servicing and deterministic control tasks, while the 2.97 V to 5.5 V external supply range accommodates common vehicle electronic power environments. The on-chip bandgap-based regulator supplies the internal digital rail, while the PLL supports controlled clock generation. A production design must confirm the exact qualification status, electrical limits, automotive test requirements, and software compatibility with NXP before release.
추천
Industrial Serial Interface Module
The MC9S12C64CPBE is suitable for an industrial serial interface module that needs local protocol handling without a higher-complexity processor. Its 64 KB of flash can hold communication drivers, configuration logic, diagnostics, and application firmware, while the 16-bit HCS12 architecture supports compact embedded control. The 52-pin LQFP package leaves access to the device’s communications, timing, and control resources, and the 2.97 V to 5.5 V supply range supports 3.3 V or 5 V system rails. Validate peripheral multiplexing, interrupt priorities, and electrical isolation requirements in the hardware design.
추천
Embedded Communications Gateway
The MC9S12C64CPBE can serve as the control processor in a cost-sensitive communications gateway where 64 KB of flash is sufficient for protocol conversion and device management. Its 25 MHz CPU12 core provides deterministic execution for message handling, while the HCS12 peripheral set can support serial communications and system control tasks. The 52-pin LQFP package is compatible with high-density surface-mount assembly, and the 2.97 V to 5.5 V operating range simplifies integration with industrial or automotive power rails. Firmware, watchdog behavior, memory endurance, and communications timing should be assessed for the intended duty cycle.
추천
General-Purpose Automation Controller
The MC9S12C64CPBE fits compact automation equipment that combines sequence control, interface management, and local diagnostics in one microcontroller. Its 16-bit CPU12 architecture and 25 MHz clock are appropriate for general-purpose embedded control, while 64 KB of flash accommodates control logic and configuration firmware. The device’s 52-pin LQFP package supports compact PCB layouts, and its broad external supply range enables integration into 3.3 V or 5 V control electronics. Designers should confirm timer, communication, and I/O requirements directly against the pin table and account for industrial temperature and EMC requirements.
추천
Cost-Sensitive Embedded Control
The MC9S12C64CPBE is appropriate when an established 16-bit embedded architecture and 64 KB of flash meet the product requirements without the overhead of a 32-bit processor. The HCS12 CPU12 core runs at 25 MHz, and the device integrates the internal digital supply regulator and PLL within a 52-pin LQFP package. This combination supports compact control boards in industrial and automotive networks where cost, space, and known software tooling are significant considerations. Because the part is NRND, new designs should balance those benefits against the availability of current NXP products.
추천
Legacy Platform Maintenance
The MC9S12C64CPBE is particularly relevant to maintenance and continuation programs for equipment built around the HCS12 platform. Its 25 MHz CPU12 core, 64 KB flash configuration, and 52-pin LQFP footprint allow service engineers to source a device matching an established board rather than redesigning the assembly. The broad 2.97 V to 5.5 V external supply range supports many existing 3.3 V and 5 V designs. For long-term support, review the NXP product-change notices, validate the exact programmed-device revision, and confirm long-term availability before committing to a maintenance production run.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S12C64CPBE — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S12GC64MPBE |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 52-pin LQFP (10 x 10 mm) | 52-pin LQFP (10 x 10 mm) |
| CPU Architecture | 16-bit HCS12 | 16-bit HCS12 |
| Maximum Frequency | 25 MHz | 25 MHz |
| Flash Memory | 64 KB (64K x 8) | 64 KB (64K x 8) |
| Mounting Type | Surface mount | Surface mount |
주요 차별점
- Exact 64 KB flash and 25 MHz configuration (vs MC9S12GC64MPBE)
- Identical 52-pin LQFP land-pattern class (vs MC9S12GC64MPBE)
- Established 2.97 V to 5.5 V external supply design (vs MC9S12GC64MPBE)
설계 노트
Design the external supply for the 2.97 V to 5.5 V operating range and distinguish it from the internally regulated digital rail. Place the required input and decoupling capacitors close to the corresponding power pins using the manufacturer’s recommended application circuit. Account for startup current, I/O-port loading, regulator behavior, and supply tolerances rather than assuming that a nominal 3.3 V or 5 V rail guarantees correct operation in every condition.
Route the 52-pin LQFP footprint according to the NXP package drawing, including any exposed-pad connection specified for that package variant. Keep sensitive clock and programming nets short, provide clean return paths, and follow the reference circuit for decoupling. Review alternate-function multiplexing before assigning every signal; several peripheral functions can share a pin, so an apparently valid schematic assignment may require a different port configuration.
Do not treat the same package size as proof of complete interchangeability. MC9S12GC64MPBE matches the listed core, frequency, flash capacity, and 52-pin LQFP format, but firmware, initialization, peripheral revisions, and device identity can still differ. Compare the full family documentation, confirm the programmed part identifier, and run hardware and firmware regression tests before approving a substitution.
규정 준수 정보
The manufacturer identifies automotive and industrial network applications as target markets, but the exact ordering variant’s AEC-Q100, RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the supplied records. Automotive qualification must be confirmed for the exact ordering code.