PIC24EP128GP204T-E/ML - 16-bit 60MIPS MCU 128KB Flash | Microchip
MPN: PIC24EP128GP204T-E/ML ✓ فعالPIC24EP128GP204T-E/ML جائزہ
A PIC24E 16-bit microcontroller is a member of Microchip's enhanced PIC24 family, which sits above the PIC16 and PIC18 8-bit lines and below the dsPIC33/PIC32 MIPS-class devices in the broader Microchip MCU hierarchy (8-bit MCU -> 16-bit MCU -> 32-bit MCU). The 'EP' suffix designates the high-speed 70 MIPS-capable core variant with DSP instructions, advanced peripherals, and extended memory addressing, while the 'T-E/ML' suffix indicates tape-and-reel packaging, the extended (-40C to +125C) automotive temperature grade, and the 44-pin QFN package.
Key features of the PIC24EP128GP204T-E/ML include up to 60 MIPS core throughput, 128 KB self-programmable Flash with ECC, 8 KB SRAM, 4 KB EEPROM (family-typical), multiple communication peripherals (I2C, SPI, UART with IrDA/LINbus support), and a high-resolution PWM module. The CTMU enables capacitive touch sensing and precise time measurement, while the integrated op-amps simplify analog front-end designs and reduce BOM count.
Architecturally, the device uses a Harvard bus with separate program and data paths, a hardware multiply/divide engine, and tightly-coupled peripheral trigger logic (PTG) that allows peripherals to chain events without CPU intervention, freeing the core for application-level processing. This combination is well suited to closed-loop control, motor drive, and high-end general-purpose embedded designs.
Typical applications include automotive body electronics, industrial motor control, digital power conversion, capacitive touch HMIs, sensor signal conditioning, and high-performance sensor hubs. The AEC-Q100 qualification makes it attractive for under-hood and body-control ECUs.
A primary design consideration when using this device is the 3.3 V-only supply range, which requires level shifting when interfacing to 5 V peripherals. Additionally, the 44-QFN exposed-pad must be soldered to a sufficient copper pour on the PCB for thermal dissipation and electrical grounding.
This page synthesizes distributor pricing, drop-in alternative listings and practical design notes drawn from Microchip documentation and authorized distributor data, offering engineers a single-source reference not available in the bare datasheet.
کے لیے ڈراپ اِن متبادل PIC24EP128GP204T-E/ML — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24EP128GP204T-E/ML (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف CTMU, Package, ADC, Communication, Core.
PIC24EP128GP204-I/ML
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24EP128GP204T-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP128GP204-H/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP128GP204T-E/ML زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | PIC Harvard 16-bit |
| Series | PIC® 24EP |
| Maximum Core Speed | 60 MIPS (70 MIPS capable) |
| Program Memory | 128 KB Flash (43K x 24) |
| RAM | 8 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| پیکیج | 44-pin QFN EP (8x8 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | -40C to +125C (Automotive E temp grade) |
| Communication Interfaces | I2C, SPI, UART (IrDA/LINbus) |
| On-chip Op-Amps | Yes |
| CTMU | Yes (Charge Time Measurement Unit) |
| Peripheral Trigger Generator (PTG) | Yes |
| AEC-Q100 Qualification | Yes |
| RoHS اسٹیٹس | Compliant |
| Packaging | Tape & Reel |
PIC24EP128GP204T-E/ML پن کنفیگریشن
| پن 1 | VDD — Core supply voltage (3.3 V) |
| پن 2 | OSCI — Oscillator input / external clock |
| پن 3 | OSCO — Oscillator output |
| پن 4 | SOSCI — Secondary oscillator input (32.768 kHz) |
| پن 5 | SOSCO — Secondary oscillator output |
| پن 6 | MCLR — Master clear / reset (active low) |
| پن 7 | PGED1 — ICSP programming data pin |
| پن 8 | PGEC1 — ICSP programming clock pin |
| پن 9 | RB0 — I/O port B bit 0 |
| پن 10 | RB1 — I/O port B bit 1 |
| پن 11 | RB2 — I/O port B bit 2 |
| پن 12 | RB3 — I/O port B bit 3 |
| پن 13 | RA0 — I/O port A bit 0 / analog input |
| پن 14 | RA1 — I/O port A bit 1 / analog input |
| پن 15 | RA2 — I/O port A bit 2 / analog input |
| پن 16 | RA3 — I/O port A bit 3 / analog input |
| پن 17 | RA4 — I/O port A bit 4 |
| پن 18 | AVDD — Analog supply voltage |
| پن 19 | AVSS — Analog ground |
| پن 20 | RB4 — I/O port B bit 4 |
| پن 21 | RB5 — I/O port B bit 5 |
| پن 22 | RB6 — I/O port B bit 6 / ICSP PGEC2 |
| پن 23 | RB7 — I/O port B bit 7 / ICSP PGED2 |
| پن 24 | RC0 — I/O port C bit 0 |
| پن 25 | RC1 — I/O port C bit 1 |
| پن 26 | RC2 — I/O port C bit 2 |
| پن 27 | VSS — Digital ground |
| پن 28 | RC3 — I/O port C bit 3 |
| پن 29 | RC4 — I/O port C bit 4 |
| پن 30 | RC5 — I/O port C bit 5 |
| پن 31 | RC6 — I/O port C bit 6 / UART TX |
| پن 32 | RC7 — I/O port C bit 7 / UART RX |
| پن 33 | RD0 — I/O port D bit 0 |
| پن 34 | RD1 — I/O port D bit 1 |
| پن 35 | RD2 — I/O port D bit 2 |
| پن 36 | RD3 — I/O port D bit 3 |
| پن 37 | RD4 — I/O port D bit 4 |
| پن 38 | RD5 — I/O port D bit 5 |
| پن 39 | RD6 — I/O port D bit 6 |
| پن 40 | RD7 — I/O port D bit 7 |
| پن 41 | RE0 — I/O port E bit 0 |
| پن 42 | RE1 — I/O port E bit 1 |
| پن 43 | RE2 — I/O port E bit 2 |
| پن 44 | EP — Exposed pad (thermal/ground - must be soldered) |
عام استعمالات
PIC24EP128GP204T-E/ML کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Control Module, Industrial Motor Control / FOC Drive, Capacitive Touch Human-Machine Interface (HMI), Digital Power Conversion (SMPS) Control, Sensor Signal Conditioning Hub, Automotive LINbus Slave ECU.
Automotive Body Control Module
The PIC24EP128GP204T-E/ML is a strong fit for automotive body control modules (BCMs) where AEC-Q100 qualification, -40C to +125C operation and reliable LINbus communication are required. Its 60 MIPS 16-bit core runs BCM state machines and LIN stacks with low latency, while the 128 KB Flash (43K x 24) holds the full body-application firmware including diagnostic UDS handlers. The CTMU and on-chip op-amps interface directly with body-control sensors (rain, light, humidity) without external analog chains. Placed on a BCM PCB with a 3.3 V LDO and LIN transceiver, the device simplifies BOM and supports both body ECU and central gateway use cases with low part count.
تجویز کردہ
Industrial Motor Control / FOC Drive
The PIC24EP128GP204T-E/ML suits low-power industrial motor control loops, including 1-2 axis brushed and small BLDC drives, where field-oriented control (FOC) or trapezoidal commutation is required. The 60 MIPS core executes FOC math in single-digit microseconds, while the high-resolution PWM module drives MOSFET half-bridges at switching frequencies from 20 kHz to 100 kHz. Integrated op-amps condition current-sense shunt signals, eliminating external amplifiers. The 128 KB Flash stores FOC parameter tables, ramp profiles and fault handlers, and the 8 KB SRAM handles per-cycle current and torque calculations.
تجویز کردہ
Capacitive Touch Human-Machine Interface (HMI)
The PIC24EP128GP204T-E/ML is well matched to capacitive-touch HMIs thanks to its integrated Charge Time Measurement Unit (CTMU), which measures capacitance changes with sub-ns resolution to detect finger touches. The 60 MIPS core drives a touch UI, RGB LED animations, and I2C communication to a host MCU or LED driver simultaneously. The 128 KB Flash supports full touch firmware plus UI state machines, while 8 KB SRAM handles active touch scanning buffers. Combined with the on-chip op-amps for analog touch sensing, this device enables a small BOM, automotive-grade touch panel design with high noise immunity.
تجویز کردہ
Digital Power Conversion (SMPS) Control
The PIC24EP128GP204T-E/ML can serve as a primary controller for low-to-mid power digital switch-mode power supplies (SMPS) where DSP-class compute is needed for digital compensation. The 60 MIPS core runs digital PID loops at PWM switching rates, while the high-resolution PWM module (typical 7.5 ns resolution for the PIC24EP family) generates precise switching waveforms. The ADC (10/12-bit on family) samples output voltage and current at high bandwidth, and the integrated op-amps amplify feedback signals before ADC sampling. The 128 KB Flash fits full compensation firmware plus telemetry, while AEC-Q100 qualification opens automotive converter designs.
تجویز کردہ
Sensor Signal Conditioning Hub
The PIC24EP128GP204T-E/ML is a good fit as a multi-sensor signal-conditioning hub for industrial and IoT-edge gateways, where multiple analog sensors (temperature, pressure, strain, flow) must be amplified, filtered and digitized. The integrated op-amps implement instrumentation-amp-style front-ends without external analog ICs, while the CTMU supports temperature and time-domain sensing. The 60 MIPS core runs sensor-fusion algorithms at high sample rates, and the 128 KB Flash holds calibration tables, linearization coefficients and JSON-over-UART protocol stacks. AEC-Q100 plus extended temperature make it deployable in outdoor and in-cabin sensing nodes.
تجویز کردہ
Automotive LINbus Slave ECU
The PIC24EP128GP204T-E/ML works as a LINbus slave ECU controller in distributed automotive networks (window lifters, seat controllers, mirror adjusters). The integrated UART with LIN support handles LIN 2.0/2.1/2.2A protocol handling directly, the 60 MIPS core processes LIN frames and actuator commands, and the integrated op-amps drive H-bridge current sense or position feedback. The AEC-Q100 grade plus extended -40C to +125C operation lets the part live inside the door module next to motors. 128 KB Flash holds the full LIN slave stack, diagnostics and actuator control firmware, while the 44-QFN EP footprint fits inside space-constrained modules.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24EP128GP204T-E/ML — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24EP128GP204-I/ML | PIC24EP128GP204T-I/ML | PIC24EP128GP204-H/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN EP (8x8 mm) | 44-QFN EP (8x8 mm) - same | 44-QFN EP (8x8 mm) - same | 44-QFN EP (8x8 mm) - same |
| Flash | 128 KB | 128 KB | 128 KB | 128 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB |
| Core Speed | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Temperature Grade | -40C to +125C (E, automotive) | -40C to +85C (I, industrial) | -40C to +85C (I, industrial) | H grade variant |
| AEC-Q100 | Yes | No | No | No |
اہم امتیازی خصوصیات
- AEC-Q100 automotive qualified at 60 MIPS (بمقابلہPIC24FJ128GA204-I/ML)
- Same 128 KB Flash in a smaller 44-QFN package (بمقابلہPIC24EP256GP204-I/PT)
- Integrated CTMU + op-amps reduces BOM (بمقابلہPIC24EP128GP204-I/ML)
ڈیزائن نوٹس
Estimated: at fcore = 60 MIPS, VDD = 3.3 V, and Icore ~ 30 mA typ (PIC24EP family), core power dissipation is approximately 99 mW. Add ~10-20 mA I/O contribution for typical 16 mA drive ports. Use a low-noise 3.3 V LDO with <50 mV dropout, and place 100 nF + 10 uF ceramic decoupling on AVDD and VDD within 5 mm of the pins. Star-ground AGND/AVSS to the QFN exposed pad and tie EP to the ground pour with at least 4 vias for thermal relief.
The 44-QFN EP package is the primary heat-dissipation path. The exposed pad must be soldered to a continuous copper pour (recommended minimum 1 square inch of 2 oz copper on the top layer) and stitched to the inner ground plane with at least 4 thermal vias (0.3 mm hole, 0.6 mm pad). For automotive under-hood designs at full 60 MIPS, this keeps theta_JA in the 25-30 C/W range and prevents thermal shutdown above the +125C ambient target.
Keep the MCLR pin trace <25 mm, and place the MCLR pull-up (10 kohm to VDD) and decoupling capacitor (100 nF to GND) within 5 mm of the pin. Route the ICSP lines (PGED1/PGEC1, PGED2/PGEC2) away from analog sensor traces and high-current switching lines to minimize noise coupling during in-circuit programming. Use a 4-layer PCB with a dedicated ground plane for the 44-QFN to control EMI and provide a stable reference for the ADC and op-amp sections.
Do not connect 5 V signals directly to the PIC24EP128GP204T-E/ML's GPIO - the absolute maximum Vih on any I/O pin is VDD + 0.3 V. Use a 74LVC245 or equivalent level shifter when interfacing to 5 V peripherals. The internal op-amp inputs share the analog I/O pins and cannot be used as digital GPIO simultaneously - plan pin assignments early so the CTMU, op-amp and standard GPIO functions do not conflict. Always configure unused I/O as outputs driven low to minimize power consumption.
تعمیل کی معلومات
AEC-Q100 qualified per Microchip product page. RoHS and REACH compliant per distributor listings. Conflict-minerals statement available from Microchip.
