PIC24FJ64GP202-E/ML - 16-bit 64KB Flash USB MCU | Microchip
MPN: PIC24FJ64GP202-E/ML ✓ فعالPIC24FJ64GP202-E/ML جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable I/O peripherals into one package. The PIC24 family uses a modified Harvard 16-bit architecture with a 24-bit instruction word, sitting hierarchically between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts - well suited to mixed-signal embedded designs that need USB connectivity, low power, and moderate computational throughput.
Key features include 64KB ECC Flash for robust code storage, 8KB RAM, hardware crypto engine, Real-Time Clock and Calendar (RTCC), multiple capture/compare/PWM modules, 12-bit ADC, and configurable logic cells. The XLP technology delivers sleep currents in the hundreds of nanoamps while retaining RAM and full CPU state, enabling years of battery life on coin-cell powered designs.
The part's peripheral set includes Full-Speed USB 2.0 with on-the-go and host support, I2C, SPI, UART, and parallel master port (PMP), giving designers flexibility for HMI, sensor aggregation, and connectivity products. The 28-pin QFN-28 (6x6 mm, ML) package balances pin count with small footprint, supporting both development and space-constrained production layouts.
Typical applications include USB peripherals, wearable health monitors, low-power IoT sensor nodes, HMI touch panels, and industrial data loggers. The E-temp grade -40C to +125C operation makes it suitable for outdoor, automotive cabin, and industrial environments. Pair with the MCP2200 USB-to-UART bridge or PICkit 4 programmer for development.
When designing with this part, ensure USB DP/DM traces are 90 ohm differential and routed within 4 mm of each other. The VUSB pin requires a local 1uF decoupling cap. The MCP2221A provides a low-cost USB-serial bridge for host CDC designs. Do not exceed 3.6V on any digital I/O pin.
کے لیے ڈراپ اِن متبادل PIC24FJ64GP202-E/ML — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24FJ64GP202-E/ML (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, Operating Temperature, Program Memory (Flash), USB.
PIC24FJ64GP202T-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ64GP202-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ64GB002-I/ML
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24FJ64GA002-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ64GB002-E/SS
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24FJ64GP202-E/ML زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | PIC24FJ |
| Series | GP2/GU2 |
| Core Architecture | 16-bit modified Harvard |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 64 KB ECC Flash |
| RAM | 8 KB |
| Operating Voltage | 2.0 V to 3.6 V |
| آپریٹنگ درجہ حرارت | -40C to +125C (E-temp) |
| پیکیج | QFN-28 (6x6 mm, ML) |
| USB | Full-Speed USB 2.0 Host/Device/OTG |
| ADC | 12-bit |
| Sleep Current (XLP) | Hundreds of nA (with retention) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| RoHS اسٹیٹس | Compliant |
| Lead-Free | Yes |
| ہیلوجن فری | Yes |
PIC24FJ64GP202-E/ML پن کنفیگریشن
| پن 1 | RA0 — GPIO/AN0/OC1 |
| پن 2 | RA1 — GPIO/AN1/OC2 |
| پن 3 | RA2 — GPIO/AN2/OC3 |
| پن 4 | RA3 — GPIO/AN3/OC4 |
| پن 5 | VDD — Supply voltage |
| پن 6 | VSS — Ground |
| پن 7 | RA4 — GPIO/AN4 |
| پن 8 | RA5 — GPIO/AN5 |
| پن 9 | RA6 — GPIO/OSC2 |
| پن 10 | RA7 — GPIO/OSC1 |
| پن 11 | RB0 — GPIO/AN8/PMP |
| پن 12 | RB1 — GPIO/AN9/PMP |
| پن 13 | RB2 — GPIO/AN10/PMP |
| پن 14 | RB3 — GPIO/AN11/PMP |
| پن 15 | VBUS — USB VBUS detect |
| پن 16 | D- — USB D- data line |
| پن 17 | D+ — USB D+ data line |
| پن 18 | VUSB — USB 3.3V regulator output |
| پن 19 | VSS — Ground |
| پن 20 | VDD — Supply voltage |
| پن 21 | RB4 — GPIO/AN12/PMP |
| پن 22 | RB5 — GPIO/AN13/PMP |
| پن 23 | RB6 — GPIO/PGD |
| پن 24 | RB7 — GPIO/PGC |
| پن 25 | RC0 — GPIO/UART1 RX |
| پن 26 | RC1 — GPIO/UART1 TX |
| پن 27 | RC2 — GPIO/I2C1 SCL |
| پن 28 | RC3 — GPIO/I2C1 SDA |
عام استعمالات
PIC24FJ64GP202-E/ML کے لیے موزوں ہے 6 ایپلیکیشنs: USB HID Peripheral (Mouse/Keyboard/Gamepad), Wearable Health Monitor, Industrial USB Data Logger, Low-Power IoT Sensor Node, HMI Touch Panel Controller, Smart Home Edge Device.
USB HID Peripheral (Mouse/Keyboard/Gamepad)
The PIC24FJ64GP202-E/ML integrates a Full-Speed USB 2.0 OTG transceiver plus 64 KB ECC Flash and 8 KB RAM, making it ideal for USB HID peripherals such as keyboards, mice, and game controllers. The Microchip USB stack supports HID boot protocol with minimal code overhead, while the XLP sleep current of hundreds of nA extends battery life for wireless dongle designs.
تجویز کردہ
Wearable Health Monitor
The PIC24FJ64GP202-E/ML's XLP sleep modes with hundreds of nanoamps retention current and 64 KB ECC Flash for application code make it well suited for wearable health monitors such as fitness bands and pulse oximeters. The 12-bit ADC interfaces directly to bio-sensor analog front ends, while the RTCC tracks timestamps without waking the CPU, conserving coin-cell energy over multi-month deployments.
تجویز کردہ
Industrial USB Data Logger
The PIC24FJ64GP202-E/ML's -40C to +125C extended temperature grade (E-temp) and Full-Speed USB 2.0 device mode enable it to function as an industrial data logger that streams sensor data to a host PC. The 64 KB ECC Flash protects against bit flips in electrically noisy factory environments, while the 8 KB RAM buffers burst-mode acquisition before USB transfer.
تجویز کردہ
Low-Power IoT Sensor Node
The PIC24FJ64GP202-E/ML serves as the controller core in low-power IoT sensor nodes, where its XLP technology keeps idle current under 1 uA while retaining RAM and peripheral state. The 64 KB Flash stores communication stacks and application firmware, and the integrated RTCC schedules periodic wake-up for sensor readings. It pairs naturally with Microchip's Sub-GHz or Wi-Fi modules for gateway connectivity.
تجویز کردہ
HMI Touch Panel Controller
The PIC24FJ64GP202-E/ML drives small HMI touch panels via its Parallel Master Port (PMP), supporting TFT displays up to QVGA resolution. The 16 MIPS core delivers smooth menu rendering while the integrated 12-bit ADC reads capacitive touch sensor outputs. Designers can leverage Microchip's mTouch library for capacitive buttons without external hardware.
تجویز کردہ
Smart Home Edge Device
The PIC24FJ64GP202-E/ML fits smart-home edge controllers such as BLE-USB bridges, Zigbee coordinators, and Z-Wave adapters. Its USB 2.0 OTG supports tethering to a host for firmware update or commissioning, while the XLP core reduces standby power below 1 mA. The 28-QFN footprint simplifies integration into compact wall-plug or tabletop form factors.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24FJ64GP202-E/ML — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24FJ64GP202T-I/ML | PIC24FJ64GP202-I/ML | PIC24FJ64GB002-I/ML |
|---|---|---|---|---|
| Package | QFN-28 (ML, 6x6 mm) | QFN-28 (ML, 6x6 mm) - same | QFN-28 (ML, 6x6 mm) - same | QFN-28 (ML, 6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 64 KB ECC | 64 KB ECC | 64 KB ECC | 64 KB ECC |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB |
| USB 2.0 OTG | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) | No (lacks USB) |
| Operating Temperature | -40C to +125C (E-temp) | -40C to +85C (I-temp) | -40C to +85C (I-temp) | -40C to +85C (I-temp) |
| Core Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| XLP Sleep Current | Hundreds of nA | Hundreds of nA | Hundreds of nA | Hundreds of nA |
اہم امتیازی خصوصیات
- Integrated Full-Speed USB 2.0 OTG with on-chip transceiver (بمقابلہPIC24FJ64GB002-I/ML)
- Extended E-temp grade for industrial/automotive-cabin use (بمقابلہPIC24FJ64GP202-I/ML)
- Mature MPLAB X toolchain with extensive CIP libraries (بمقابلہPIC24FJ64GL306-I/PT)
ڈیزائن نوٹس
Estimated: at VDD = 3.3 V, active core current is roughly 10-15 mA at 32 MHz. The integrated USB transceiver draws an additional 5-10 mA when active in device mode. Place a 1.0 uF ceramic decoupling capacitor within 3 mm of the VUSB pin to suppress USB inrush transients. The XLP sleep modes reduce quiescent current below 1 uA with full RAM retention.
Route USB DP and DM as a 90 ohm differential pair with 4 mm maximum trace spacing, no stubs, and a ground reference plane on the layer below. Keep DP/DM traces under 50 mm total length and isolate them from switching power and high-frequency digital signals. The exposed thermal pad on the QFN-28 (ML) package must be soldered to a ground plane for electrical and thermal performance.
Do not exceed 3.6 V on any digital I/O pin; the PIC24FJ family is not 5 V tolerant. Ensure MCLR is pulled high through a 10 kohm resistor unless external reset control is required. The ICD/PGD/PGC pins (RB6/RB7) must not be loaded with more than 25 pF capacitance during in-circuit programming. The 28-QFN QFN-28 (ML) package requires careful pad geometry to avoid solder wicking under the thermal pad.
تعمیل کی معلومات
RoHS and lead-free per Microchip product page. E-temp grade is not AEC-Q100 qualified; for automotive AEC-Q100 select the -VAO suffix variant. REACH and conflict-mineral documentation available from Microchip on request.
