PIC24HJ128GP210A-E/PF - 16-bit MCU 40MIPS 128KB Flash | Microchip
MPN: PIC24HJ128GP210A-E/PF ✓ فعالPIC24HJ128GP210A-E/PF جائزہ
Key features include 128 KB Flash (43K x 24), 8 KB SRAM, 40 MIPS CPU performance at 3.0-3.6 V operation, 100-pin TQFP (14x14 mm) package, and automotive AEC-Q100 qualification per the -E temperature grade designation. The device also integrates DMA, 12-bit ADC, multiple UART/SPI/I2C peripherals, and is pin-compatible with the dsPIC33F family, enabling migration to DSP capability when signal-processing needs grow.
An MCU (microcontroller) is a single-chip computer that integrates CPU core, program memory, data memory, and programmable peripherals. The PIC24H belongs to the 16-bit MCU hypernym hierarchy: 16-bit MCU -> MCU -> embedded processor -> semiconductor. Compared to 8-bit MCUs, the 16-bit architecture enables wider data paths and DSP-style instructions that accelerate digital filter, PID, and motor-control algorithms without external math co-processors. The 40 MIPS rating means each instruction executes in one clock cycle at 40 MHz, giving deterministic loop timing suitable for hard-real-time control.
Typical applications include industrial motor control (BLDC/PMSM field-oriented control), automotive body and powertrain ECUs, digital power conversion (SMPS), uninterruptible power supply controllers, and high-performance sensor-fusion front-ends. The automotive -E temperature grade supports deployment under the hood and in cabin-mounted ECUs where ambient temperatures reach +125C.
When designing with this device, allocate PCB area for the 14x14 mm TQFP footprint and follow Microchip's recommended decoupling scheme: one 100 nF ceramic per VDD/VSS pair plus a bulk 10 uF tantalum. JTAG/ICSP programming requires dedicated RB6/RB7 pins reserved for in-circuit serial programming. Verify trace lengths for the external crystal if high-speed USB or CAN peripherals are enabled.
کے لیے ڈراپ اِن متبادل PIC24HJ128GP210A-E/PF — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24HJ128GP210A-E/PF (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Core Architecture, Operating Temperature, Package, ADC, Program Memory (Flash).
PIC24HJ128GP210A-I/PF
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24HJ128GP210-I/PF
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →dsPIC33FJ128GP210A-I/PF
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24HJ256GP210A-I/PF
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24HJ128GP510A-I/PF
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
dsPIC33FJ256GP210A-I/PF
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24HJ128GP210A-E/PF زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | 16-bit PIC24H |
| CPU Speed | 40 MIPS at 40 MHz |
| Program Memory (Flash) | 128 KB (43K x 24) |
| Data Memory (RAM) | 8 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| پیکیج | 100-pin TQFP (PF) 14x14 mm |
| پن کی تعداد | 100 |
| آپریٹنگ درجہ حرارت | -40C to +125C (Automotive -E grade) |
| AEC-Q100 Qualification | Qualified |
| DMA Channels | 8 |
| Communication Peripherals | UART, SPI, I2C, ECAN |
| ماؤنٹنگ ٹائپ | Surface Mount |
| MSL لیول | 3 |
| RoHS اسٹیٹس | Compliant |
PIC24HJ128GP210A-E/PF پن کنفیگریشن
| پن 1 | RP1/CN18/RD0 — Remappable peripheral / change notification / GPIO RD0 |
| پن 2 | RP2/CN17/RD1 — Remappable peripheral / change notification / GPIO RD1 |
| پن 3 | RP3/CN16/RD2 — Remappable peripheral / change notification / GPIO RD2 |
| پن 4 | RP4/CN15/RD3 — Remappable peripheral / change notification / GPIO RD3 |
| پن 5 | RP6/CN8/RD4 — Remappable peripheral / change notification / GPIO RD4 |
| پن 6 | RP7/CN9/RD5 — Remappable peripheral / change notification / GPIO RD5 |
| پن 7 | RP8/CN10/RD6 — Remappable peripheral / change notification / GPIO RD6 |
| پن 8 | RP9/CN11/RD7 — Remappable peripheral / change notification / GPIO RD7 |
| پن 9 | RP10/CN12/RD8 — Remappable peripheral / change notification / GPIO RD8 |
| پن 10 | RP11/CN13/RD9 — Remappable peripheral / change notification / GPIO RD9 |
| پن 11 | RP12/CN14/RD10 — Remappable peripheral / change notification / GPIO RD10 |
| پن 12 | RP13/CN30/RD11 — Remappable peripheral / change notification / GPIO RD11 |
| پن 13 | RP14/CN31/RD12 — Remappable peripheral / change notification / GPIO RD12 |
| پن 14 | RP15/CN32/RD13 — Remappable peripheral / change notification / GPIO RD13 |
| پن 15 | RP16/CN17/RD14 — Remappable peripheral / change notification / GPIO RD14 |
| پن 16 | RP17/CN18/RD15 — Remappable peripheral / change notification / GPIO RD15 |
| پن 17 | VDD — Digital supply voltage (3.3V nominal) |
| پن 18 | VSS — Digital ground |
| پن 19 | OSC1/RC12 — Crystal oscillator input |
| پن 20 | OSC2/RC15 — Crystal oscillator output |
| پن 21 | RA0 — GPIO RA0 |
| پن 22 | RA1 — GPIO RA1 |
| پن 23 | RA2 — GPIO RA2 |
| پن 24 | RA3 — GPIO RA3 |
| پن 25 | RA4 — GPIO RA4 |
| پن 26 | RA5 — GPIO RA5 |
| پن 27 | RA6 — GPIO RA6 |
| پن 28 | RA7 — GPIO RA7 |
| پن 29 | RB0 — GPIO / programming RB0 |
| پن 30 | RB1 — GPIO / programming RB1 |
| پن 31 | RB2 — GPIO RB2 |
| پن 32 | RB3 — GPIO RB3 |
| پن 33 | RB4 — GPIO RB4 |
| پن 34 | RB5 — GPIO RB5 |
| پن 35 | RB6 — ICSP programming clock |
| پن 36 | RB7 — ICSP programming data |
| پن 37 | RB8 — GPIO RB8 |
| پن 38 | RB9 — GPIO RB9 |
| پن 39 | RB10 — GPIO RB10 |
| پن 40 | RB11 — GPIO RB11 |
| پن 41 | RB12 — GPIO RB12 |
| پن 42 | RB13 — GPIO RB13 |
| پن 43 | RB14 — GPIO RB14 |
| پن 44 | RB15 — GPIO RB15 |
| پن 45 | RC0 — GPIO RC0 |
| پن 46 | RC1 — GPIO RC1 |
| پن 47 | RC2 — GPIO RC2 |
| پن 48 | RC3 — GPIO RC3 |
| پن 49 | RC4 — GPIO RC4 |
| پن 50 | VSS — Digital ground |
| پن 51 | VDD — Digital supply voltage (3.3V nominal) |
| پن 52 | RC5 — GPIO RC5 |
| پن 53 | RC6 — GPIO RC6 |
| پن 54 | RC7 — GPIO RC7 |
| پن 55 | RC8 — GPIO RC8 |
| پن 56 | RC9 — GPIO RC9 |
| پن 57 | RC10 — GPIO RC10 |
| پن 58 | RC11 — GPIO RC11 |
| پن 59 | RC12 — GPIO RC12 |
| پن 60 | RC13 — GPIO RC13 |
| پن 61 | RC14 — GPIO RC14 |
| پن 62 | RC15 — GPIO RC15 |
| پن 63 | RE0 — GPIO RE0 |
| پن 64 | RE1 — GPIO RE1 |
| پن 65 | RE2 — GPIO RE2 |
| پن 66 | RE3 — GPIO RE3 |
| پن 67 | RE4 — GPIO RE4 |
| پن 68 | RE5 — GPIO RE5 |
| پن 69 | RE6 — GPIO RE6 |
| پن 70 | RE7 — GPIO RE7 |
| پن 71 | RF0 — GPIO RF0 |
| پن 72 | RF1 — GPIO RF1 |
| پن 73 | RF2 — GPIO RF2 |
| پن 74 | RF3 — GPIO RF3 |
| پن 75 | RF4 — GPIO RF4 |
| پن 76 | RF5 — GPIO RF5 |
| پن 77 | RF6 — GPIO RF6 |
| پن 78 | RF7 — GPIO RF7 |
| پن 79 | RG0 — GPIO RG0 |
| پن 80 | RG1 — GPIO RG1 |
| پن 81 | RG2 — GPIO RG2 |
| پن 82 | RG3 — GPIO RG3 |
| پن 83 | RG6 — GPIO RG6 |
| پن 84 | RG7 — GPIO RG7 |
| پن 85 | RG8 — GPIO RG8 |
| پن 86 | RG9 — GPIO RG9 |
| پن 87 | MCLR — Master Clear (reset) input |
| پن 88 | RG13 — GPIO RG13 |
| پن 89 | RG14 — GPIO RG14 |
| پن 90 | RG15 — GPIO RG15 |
| پن 91 | VDD — Digital supply voltage (3.3V nominal) |
| پن 92 | VSS — Digital ground |
| پن 93 | RF8 — GPIO RF8 |
| پن 94 | RF9 — GPIO RF9 |
| پن 95 | RF10 — GPIO RF10 |
| پن 96 | RF11 — GPIO RF11 |
| پن 97 | RF12 — GPIO RF12 |
| پن 98 | RF13 — GPIO RF13 |
| پن 99 | AVDD — Analog supply voltage |
| پن 100 | AVSS — Analog ground |
عام استعمالات
PIC24HJ128GP210A-E/PF کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Control Module, Industrial Motor Control (BLDC / PMSM), Digital Power Conversion (SMPS), Industrial Sensor Hub / Data Logger, Uninterruptible Power Supply (UPS) Controller, Medical Monitoring Equipment (Non-Life-Critical).
Automotive Body Control Module
The PIC24HJ128GP210A-E/PF is an excellent fit for automotive body control modules thanks to its AEC-Q100 qualification and -40C to +125C operating range per the -E temperature grade. Its ECAN peripheral supports body-class network speeds, while 8 KB RAM and 128 KB Flash comfortably hold lighting, mirror, and door-lock state-machine firmware. The 40 MIPS CPU executes 16-bit PID loops for HVAC damper control and ambient-light sensor fusion at low latency, and the DMA controller offloads repetitive register-to-memory transfers to free the core for application logic. Pin compatibility with the dsPIC33F family allows painless migration when signal-processing requirements grow.
تجویز کردہ
Industrial Motor Control (BLDC / PMSM)
For three-phase brushless DC or permanent-magnet synchronous motor control, the PIC24HJ128GP210A-E/PF provides the deterministic 40 MIPS throughput required to run sensorless or Hall-sensor-based commutation at switching frequencies up to 25 kHz. Its 12-bit ADC captures phase-current shunt signals while DMA streams conversion results into RAM without CPU intervention. Designers targeting higher-end field-oriented control should evaluate the pin-compatible dsPIC33FJ128GP210A, which adds hardware MAC instructions and dedicated motor-control PWM peripherals that offload Park/Clarke transforms from the core.
تجویز کردہ
Digital Power Conversion (SMPS)
The PIC24HJ128GP210A-E/PF fits mid-power digital SMPS controllers including PFC, LLC, and phase-shifted full-bridge topologies where its 40 MIPS core executes digital compensation loops at 100 kHz+ switching frequencies. The 12-bit ADC with dedicated sample-and-hold captures voltage and current sense signals with sub-microsecond latency, while DMA pumps conversion data into PID controller buffers without CPU overhead. The high-resolution PWM peripheral supports duty-cycle adjustments in 8.5 ns increments at 40 MHz peripheral clock, enabling fine digital current-mode control.
تجویز کردہ
Industrial Sensor Hub / Data Logger
Industrial sensor hubs and standalone data loggers leverage the PIC24HJ128GP210A-E/PF's 128 KB Flash for embedded file-system support and its 8 KB RAM for time-stamped sample buffers. The UART/SPI/I2C ports connect to external sensors, FRAM, or RTC chips, while ECAN interfaces to industrial networks. The -40C to +125C temperature range supports deployment in factory-floor enclosures and outdoor cabinets without additional thermal conditioning.
تجویز کردہ
Uninterruptible Power Supply (UPS) Controller
Online UPS systems rely on the PIC24HJ128GP210A-E/PF to monitor battery state-of-charge, mains voltage, and inverter output in real time. Its 12-bit ADC and DMA controller capture waveform samples at the PWM rate while the 40 MIPS core runs power-quality algorithms and executes battery management state machines. The -E temperature grade supports enclosed battery cabinets where ambient can reach +60C, while the AEC-Q100 pedigree brings robustness expected in mission-critical power systems.
تجویز کردہ
Medical Monitoring Equipment (Non-Life-Critical)
For non-life-critical medical monitoring devices such as infusion pump controllers, blood-pressure monitors, or laboratory instrumentation, the PIC24HJ128GP210A-E/PF delivers the deterministic 16-bit performance needed for sensor signal conditioning and user-interface control. The AEC-Q100 qualification supports deployment in clinical environments with strict reliability expectations. Engineers must add appropriate medical-grade isolation, redundant supervision, and comply with IEC 60601-1 if pursuing a regulated medical device design.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24HJ128GP210A-E/PF — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24HJ128GP210A-I/PF | PIC24HJ128GP210-I/PF | dsPIC33FJ128GP210A-I/PF | PIC24HJ256GP210A-I/PF | PIC24HJ128GP510A-I/PF | dsPIC33FJ256GP210A-I/PF |
|---|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (PF) 14x14 mm | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB | 256 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 16 KB |
| CPU Performance | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Temperature Grade | -40C to +125C (Automotive -E) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| AEC-Q100 Qualified | Yes | No | No | No | No | No | No |
| DSP Engine | No | No | No | Yes (DSP engine with MAC) | No | No | Yes (DSP engine with MAC) |
| Operating Voltage | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V |
اہم امتیازی خصوصیات
- AEC-Q100 qualified automotive temperature grade (بمقابلہPIC24HJ128GP210A-I/PF)
- DSP-capable drop-in migration path (بمقابلہPIC24HJ128GP510A-I/PF)
- 128 KB Flash optimized for cost-sensitive applications (بمقابلہPIC24HJ256GP210A-I/PF)
ڈیزائن نوٹس
Decouple every VDD/VSS pair with a 100 nF X7R ceramic placed within 5 mm of the pin, and add one bulk 10 uF tantalum or ceramic capacitor on each major supply rail. The PIC24HJ128GP210A-E/PF draws a peak transient of approximately 100 mA during Flash programming; undersized decoupling may trigger brown-out resets. Isolate AVDD from VDD with a ferrite bead if analog accuracy is required, and tie AVSS to VSS with a single-point ground star.
Reserve pins RB6 and RB7 for ICSP programming - do not load them with low-impedance circuitry that would interfere with the programmer. The 100-pin TQFP (PF) has a 14x14 mm footprint with 0.5 mm pitch; route inner-pin signals on internal layers and break out power pins with wide pours. Place the external crystal within 8 mm of OSC1/OSC2 with grounded guard traces to minimize EMI pickup.
Do not confuse the -E (automotive, -40C to +125C, AEC-Q100) temperature grade with the -I (industrial, -40C to +85C) grade when ordering; the -I variant is not AEC-Q100 qualified and may fail automotive qualification testing. Verify that your firmware configures the watchdog timer and brown-out reset (BOR) on every power-up, since enabling BOR at 2.7V prevents corrupted Flash execution during supply droop. When migrating to the dsPIC33F, review peripheral libraries because DSP register names differ from PIC24H.
Estimated: the PIC24HJ128GP210A-E/PF dissipates approximately 240 mW at 40 MIPS with all peripherals active at 3.3V. The 100-pin TQFP thermal resistance theta_JA is approximately 39 C/W on a 4-layer JEDEC test board, yielding a junction temperature rise of about 9.4 C above ambient at typical operating loads. At +125C ambient, ensure adequate PCB copper area (at least 1 square inch of 2-oz ground pour) to keep junction below the +150C maximum.
تعمیل کی معلومات
AEC-Q100 qualification confirmed per the -E temperature grade designation. RoHS compliance verified from Microchip product page. Halogen-free status not confirmed from the verified web data - set to unknown.
