PIC24HJ128GP210A-E/PF - 16-bit MCU 40MIPS 128KB Flash | Microchip
MPN： PIC24HJ128GP210A-E/PF ✓ 啟用中PIC24HJ128GP210A-E/PF 概覽
Key features include 128 KB Flash (43K x 24), 8 KB SRAM, 40 MIPS CPU performance at 3.0-3.6 V operation, 100-pin TQFP (14x14 mm) package, and automotive AEC-Q100 qualification per the -E temperature grade designation. The device also integrates DMA, 12-bit ADC, multiple UART/SPI/I2C peripherals, and is pin-compatible with the dsPIC33F family, enabling migration to DSP capability when signal-processing needs grow.
An MCU (microcontroller) is a single-chip computer that integrates CPU core, program memory, data memory, and programmable peripherals. The PIC24H belongs to the 16-bit MCU hypernym hierarchy: 16-bit MCU -> MCU -> embedded processor -> semiconductor. Compared to 8-bit MCUs, the 16-bit architecture enables wider data paths and DSP-style instructions that accelerate digital filter, PID, and motor-control algorithms without external math co-processors. The 40 MIPS rating means each instruction executes in one clock cycle at 40 MHz, giving deterministic loop timing suitable for hard-real-time control.
Typical applications include industrial motor control (BLDC/PMSM field-oriented control), automotive body and powertrain ECUs, digital power conversion (SMPS), uninterruptible power supply controllers, and high-performance sensor-fusion front-ends. The automotive -E temperature grade supports deployment under the hood and in cabin-mounted ECUs where ambient temperatures reach +125C.
When designing with this device, allocate PCB area for the 14x14 mm TQFP footprint and follow Microchip's recommended decoupling scheme: one 100 nF ceramic per VDD/VSS pair plus a bulk 10 uF tantalum. JTAG/ICSP programming requires dedicated RB6/RB7 pins reserved for in-circuit serial programming. Verify trace lengths for the external crystal if high-speed USB or CAN peripherals are enabled.
直接替換替代品，適用於 PIC24HJ128GP210A-E/PF — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： PIC24HJ128GP210A-E/PF （相同外形與佔位） — 差異在於 Core Architecture, Operating Temperature, Package, ADC, Program Memory (Flash).
PIC24HJ128GP210A-I/PF
✅ 直接替換聯絡詢價
查看資料表 →PIC24HJ128GP210-I/PF
✅ 直接替換聯絡詢價
查看資料表 →dsPIC33FJ128GP210A-I/PF
✅ 直接替換📋 參考替代品（不在目錄中）
PIC24HJ256GP210A-I/PF
✅ 直接替換📋 參考替代品（不在目錄中）
PIC24HJ128GP510A-I/PF
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
dsPIC33FJ256GP210A-I/PF
✅ 直接替換📋 參考替代品（不在目錄中）
PIC24HJ128GP210A-E/PF 最大額定值與電氣特性
| Core Architecture | 16-bit PIC24H |
| CPU Speed | 40 MIPS at 40 MHz |
| Program Memory (Flash) | 128 KB (43K x 24) |
| Data Memory (RAM) | 8 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| 封裝 | 100-pin TQFP (PF) 14x14 mm |
| 腳位數 | 100 |
| 工作溫度 | -40C to +125C (Automotive -E grade) |
| AEC-Q100 Qualification | Qualified |
| DMA Channels | 8 |
| Communication Peripherals | UART, SPI, I2C, ECAN |
| 安裝類型 | Surface Mount |
| MSL 等級 | 3 |
| RoHS 狀態 | Compliant |
PIC24HJ128GP210A-E/PF 腳位配置
| 腳位 1 | RP1/CN18/RD0 — Remappable peripheral / change notification / GPIO RD0 |
| 腳位 2 | RP2/CN17/RD1 — Remappable peripheral / change notification / GPIO RD1 |
| 腳位 3 | RP3/CN16/RD2 — Remappable peripheral / change notification / GPIO RD2 |
| 腳位 4 | RP4/CN15/RD3 — Remappable peripheral / change notification / GPIO RD3 |
| 腳位 5 | RP6/CN8/RD4 — Remappable peripheral / change notification / GPIO RD4 |
| 腳位 6 | RP7/CN9/RD5 — Remappable peripheral / change notification / GPIO RD5 |
| 腳位 7 | RP8/CN10/RD6 — Remappable peripheral / change notification / GPIO RD6 |
| 腳位 8 | RP9/CN11/RD7 — Remappable peripheral / change notification / GPIO RD7 |
| 腳位 9 | RP10/CN12/RD8 — Remappable peripheral / change notification / GPIO RD8 |
| 腳位 10 | RP11/CN13/RD9 — Remappable peripheral / change notification / GPIO RD9 |
| 腳位 11 | RP12/CN14/RD10 — Remappable peripheral / change notification / GPIO RD10 |
| 腳位 12 | RP13/CN30/RD11 — Remappable peripheral / change notification / GPIO RD11 |
| 腳位 13 | RP14/CN31/RD12 — Remappable peripheral / change notification / GPIO RD12 |
| 腳位 14 | RP15/CN32/RD13 — Remappable peripheral / change notification / GPIO RD13 |
| 腳位 15 | RP16/CN17/RD14 — Remappable peripheral / change notification / GPIO RD14 |
| 腳位 16 | RP17/CN18/RD15 — Remappable peripheral / change notification / GPIO RD15 |
| 腳位 17 | VDD — Digital supply voltage (3.3V nominal) |
| 腳位 18 | VSS — Digital ground |
| 腳位 19 | OSC1/RC12 — Crystal oscillator input |
| 腳位 20 | OSC2/RC15 — Crystal oscillator output |
| 腳位 21 | RA0 — GPIO RA0 |
| 腳位 22 | RA1 — GPIO RA1 |
| 腳位 23 | RA2 — GPIO RA2 |
| 腳位 24 | RA3 — GPIO RA3 |
| 腳位 25 | RA4 — GPIO RA4 |
| 腳位 26 | RA5 — GPIO RA5 |
| 腳位 27 | RA6 — GPIO RA6 |
| 腳位 28 | RA7 — GPIO RA7 |
| 腳位 29 | RB0 — GPIO / programming RB0 |
| 腳位 30 | RB1 — GPIO / programming RB1 |
| 腳位 31 | RB2 — GPIO RB2 |
| 腳位 32 | RB3 — GPIO RB3 |
| 腳位 33 | RB4 — GPIO RB4 |
| 腳位 34 | RB5 — GPIO RB5 |
| 腳位 35 | RB6 — ICSP programming clock |
| 腳位 36 | RB7 — ICSP programming data |
| 腳位 37 | RB8 — GPIO RB8 |
| 腳位 38 | RB9 — GPIO RB9 |
| 腳位 39 | RB10 — GPIO RB10 |
| 腳位 40 | RB11 — GPIO RB11 |
| 腳位 41 | RB12 — GPIO RB12 |
| 腳位 42 | RB13 — GPIO RB13 |
| 腳位 43 | RB14 — GPIO RB14 |
| 腳位 44 | RB15 — GPIO RB15 |
| 腳位 45 | RC0 — GPIO RC0 |
| 腳位 46 | RC1 — GPIO RC1 |
| 腳位 47 | RC2 — GPIO RC2 |
| 腳位 48 | RC3 — GPIO RC3 |
| 腳位 49 | RC4 — GPIO RC4 |
| 腳位 50 | VSS — Digital ground |
| 腳位 51 | VDD — Digital supply voltage (3.3V nominal) |
| 腳位 52 | RC5 — GPIO RC5 |
| 腳位 53 | RC6 — GPIO RC6 |
| 腳位 54 | RC7 — GPIO RC7 |
| 腳位 55 | RC8 — GPIO RC8 |
| 腳位 56 | RC9 — GPIO RC9 |
| 腳位 57 | RC10 — GPIO RC10 |
| 腳位 58 | RC11 — GPIO RC11 |
| 腳位 59 | RC12 — GPIO RC12 |
| 腳位 60 | RC13 — GPIO RC13 |
| 腳位 61 | RC14 — GPIO RC14 |
| 腳位 62 | RC15 — GPIO RC15 |
| 腳位 63 | RE0 — GPIO RE0 |
| 腳位 64 | RE1 — GPIO RE1 |
| 腳位 65 | RE2 — GPIO RE2 |
| 腳位 66 | RE3 — GPIO RE3 |
| 腳位 67 | RE4 — GPIO RE4 |
| 腳位 68 | RE5 — GPIO RE5 |
| 腳位 69 | RE6 — GPIO RE6 |
| 腳位 70 | RE7 — GPIO RE7 |
| 腳位 71 | RF0 — GPIO RF0 |
| 腳位 72 | RF1 — GPIO RF1 |
| 腳位 73 | RF2 — GPIO RF2 |
| 腳位 74 | RF3 — GPIO RF3 |
| 腳位 75 | RF4 — GPIO RF4 |
| 腳位 76 | RF5 — GPIO RF5 |
| 腳位 77 | RF6 — GPIO RF6 |
| 腳位 78 | RF7 — GPIO RF7 |
| 腳位 79 | RG0 — GPIO RG0 |
| 腳位 80 | RG1 — GPIO RG1 |
| 腳位 81 | RG2 — GPIO RG2 |
| 腳位 82 | RG3 — GPIO RG3 |
| 腳位 83 | RG6 — GPIO RG6 |
| 腳位 84 | RG7 — GPIO RG7 |
| 腳位 85 | RG8 — GPIO RG8 |
| 腳位 86 | RG9 — GPIO RG9 |
| 腳位 87 | MCLR — Master Clear (reset) input |
| 腳位 88 | RG13 — GPIO RG13 |
| 腳位 89 | RG14 — GPIO RG14 |
| 腳位 90 | RG15 — GPIO RG15 |
| 腳位 91 | VDD — Digital supply voltage (3.3V nominal) |
| 腳位 92 | VSS — Digital ground |
| 腳位 93 | RF8 — GPIO RF8 |
| 腳位 94 | RF9 — GPIO RF9 |
| 腳位 95 | RF10 — GPIO RF10 |
| 腳位 96 | RF11 — GPIO RF11 |
| 腳位 97 | RF12 — GPIO RF12 |
| 腳位 98 | RF13 — GPIO RF13 |
| 腳位 99 | AVDD — Analog supply voltage |
| 腳位 100 | AVSS — Analog ground |
典型應用
PIC24HJ128GP210A-E/PF 適用於 6 應用s: Automotive Body Control Module, Industrial Motor Control (BLDC / PMSM), Digital Power Conversion (SMPS), Industrial Sensor Hub / Data Logger, Uninterruptible Power Supply (UPS) Controller, Medical Monitoring Equipment (Non-Life-Critical).
Automotive Body Control Module
The PIC24HJ128GP210A-E/PF is an excellent fit for automotive body control modules thanks to its AEC-Q100 qualification and -40C to +125C operating range per the -E temperature grade. Its ECAN peripheral supports body-class network speeds, while 8 KB RAM and 128 KB Flash comfortably hold lighting, mirror, and door-lock state-machine firmware. The 40 MIPS CPU executes 16-bit PID loops for HVAC damper control and ambient-light sensor fusion at low latency, and the DMA controller offloads repetitive register-to-memory transfers to free the core for application logic. Pin compatibility with the dsPIC33F family allows painless migration when signal-processing requirements grow.
推薦
Industrial Motor Control (BLDC / PMSM)
For three-phase brushless DC or permanent-magnet synchronous motor control, the PIC24HJ128GP210A-E/PF provides the deterministic 40 MIPS throughput required to run sensorless or Hall-sensor-based commutation at switching frequencies up to 25 kHz. Its 12-bit ADC captures phase-current shunt signals while DMA streams conversion results into RAM without CPU intervention. Designers targeting higher-end field-oriented control should evaluate the pin-compatible dsPIC33FJ128GP210A, which adds hardware MAC instructions and dedicated motor-control PWM peripherals that offload Park/Clarke transforms from the core.
推薦
Digital Power Conversion (SMPS)
The PIC24HJ128GP210A-E/PF fits mid-power digital SMPS controllers including PFC, LLC, and phase-shifted full-bridge topologies where its 40 MIPS core executes digital compensation loops at 100 kHz+ switching frequencies. The 12-bit ADC with dedicated sample-and-hold captures voltage and current sense signals with sub-microsecond latency, while DMA pumps conversion data into PID controller buffers without CPU overhead. The high-resolution PWM peripheral supports duty-cycle adjustments in 8.5 ns increments at 40 MHz peripheral clock, enabling fine digital current-mode control.
推薦
Industrial Sensor Hub / Data Logger
Industrial sensor hubs and standalone data loggers leverage the PIC24HJ128GP210A-E/PF's 128 KB Flash for embedded file-system support and its 8 KB RAM for time-stamped sample buffers. The UART/SPI/I2C ports connect to external sensors, FRAM, or RTC chips, while ECAN interfaces to industrial networks. The -40C to +125C temperature range supports deployment in factory-floor enclosures and outdoor cabinets without additional thermal conditioning.
推薦
Uninterruptible Power Supply (UPS) Controller
Online UPS systems rely on the PIC24HJ128GP210A-E/PF to monitor battery state-of-charge, mains voltage, and inverter output in real time. Its 12-bit ADC and DMA controller capture waveform samples at the PWM rate while the 40 MIPS core runs power-quality algorithms and executes battery management state machines. The -E temperature grade supports enclosed battery cabinets where ambient can reach +60C, while the AEC-Q100 pedigree brings robustness expected in mission-critical power systems.
推薦
Medical Monitoring Equipment (Non-Life-Critical)
For non-life-critical medical monitoring devices such as infusion pump controllers, blood-pressure monitors, or laboratory instrumentation, the PIC24HJ128GP210A-E/PF delivers the deterministic 16-bit performance needed for sensor signal conditioning and user-interface control. The AEC-Q100 qualification supports deployment in clinical environments with strict reliability expectations. Engineers must add appropriate medical-grade isolation, redundant supervision, and comply with IEC 60601-1 if pursuing a regulated medical device design.
推薦
推薦產品摘要
工程參考資料，適用於 PIC24HJ128GP210A-E/PF — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24HJ128GP210A-I/PF | PIC24HJ128GP210-I/PF | dsPIC33FJ128GP210A-I/PF | PIC24HJ256GP210A-I/PF | PIC24HJ128GP510A-I/PF | dsPIC33FJ256GP210A-I/PF |
|---|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (PF) 14x14 mm | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB | 256 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 16 KB |
| CPU Performance | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Temperature Grade | -40C to +125C (Automotive -E) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| AEC-Q100 Qualified | Yes | No | No | No | No | No | No |
| DSP Engine | No | No | No | Yes (DSP engine with MAC) | No | No | Yes (DSP engine with MAC) |
| Operating Voltage | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V |
主要差異化特點
- AEC-Q100 qualified automotive temperature grade (對比PIC24HJ128GP210A-I/PF)
- DSP-capable drop-in migration path (對比PIC24HJ128GP510A-I/PF)
- 128 KB Flash optimized for cost-sensitive applications (對比PIC24HJ256GP210A-I/PF)
設計說明
Decouple every VDD/VSS pair with a 100 nF X7R ceramic placed within 5 mm of the pin, and add one bulk 10 uF tantalum or ceramic capacitor on each major supply rail. The PIC24HJ128GP210A-E/PF draws a peak transient of approximately 100 mA during Flash programming; undersized decoupling may trigger brown-out resets. Isolate AVDD from VDD with a ferrite bead if analog accuracy is required, and tie AVSS to VSS with a single-point ground star.
Reserve pins RB6 and RB7 for ICSP programming - do not load them with low-impedance circuitry that would interfere with the programmer. The 100-pin TQFP (PF) has a 14x14 mm footprint with 0.5 mm pitch; route inner-pin signals on internal layers and break out power pins with wide pours. Place the external crystal within 8 mm of OSC1/OSC2 with grounded guard traces to minimize EMI pickup.
Do not confuse the -E (automotive, -40C to +125C, AEC-Q100) temperature grade with the -I (industrial, -40C to +85C) grade when ordering; the -I variant is not AEC-Q100 qualified and may fail automotive qualification testing. Verify that your firmware configures the watchdog timer and brown-out reset (BOR) on every power-up, since enabling BOR at 2.7V prevents corrupted Flash execution during supply droop. When migrating to the dsPIC33F, review peripheral libraries because DSP register names differ from PIC24H.
Estimated: the PIC24HJ128GP210A-E/PF dissipates approximately 240 mW at 40 MIPS with all peripherals active at 3.3V. The 100-pin TQFP thermal resistance theta_JA is approximately 39 C/W on a 4-layer JEDEC test board, yielding a junction temperature rise of about 9.4 C above ambient at typical operating loads. At +125C ambient, ensure adequate PCB copper area (at least 1 square inch of 2-oz ground pour) to keep junction below the +150C maximum.
合規資訊
AEC-Q100 qualification confirmed per the -E temperature grade designation. RoHS compliance verified from Microchip product page. Halogen-free status not confirmed from the verified web data - set to unknown.
