PIC24HJ128GP210A-E/PF - 16-bit MCU 40MIPS 128KB Flash | Microchip
MPN: PIC24HJ128GP210A-E/PF ✓ Hoạt độngPIC24HJ128GP210A-E/PF Tóm tắt
Key features include 128 KB Flash (43K x 24), 8 KB SRAM, 40 MIPS CPU performance at 3.0-3.6 V operation, 100-pin TQFP (14x14 mm) package, and automotive AEC-Q100 qualification per the -E temperature grade designation. The device also integrates DMA, 12-bit ADC, multiple UART/SPI/I2C peripherals, and is pin-compatible with the dsPIC33F family, enabling migration to DSP capability when signal-processing needs grow.
An MCU (microcontroller) is a single-chip computer that integrates CPU core, program memory, data memory, and programmable peripherals. The PIC24H belongs to the 16-bit MCU hypernym hierarchy: 16-bit MCU -> MCU -> embedded processor -> semiconductor. Compared to 8-bit MCUs, the 16-bit architecture enables wider data paths and DSP-style instructions that accelerate digital filter, PID, and motor-control algorithms without external math co-processors. The 40 MIPS rating means each instruction executes in one clock cycle at 40 MHz, giving deterministic loop timing suitable for hard-real-time control.
Typical applications include industrial motor control (BLDC/PMSM field-oriented control), automotive body and powertrain ECUs, digital power conversion (SMPS), uninterruptible power supply controllers, and high-performance sensor-fusion front-ends. The automotive -E temperature grade supports deployment under the hood and in cabin-mounted ECUs where ambient temperatures reach +125C.
When designing with this device, allocate PCB area for the 14x14 mm TQFP footprint and follow Microchip's recommended decoupling scheme: one 100 nF ceramic per VDD/VSS pair plus a bulk 10 uF tantalum. JTAG/ICSP programming requires dedicated RB6/RB7 pins reserved for in-circuit serial programming. Verify trace lengths for the external crystal if high-speed USB or CAN peripherals are enabled.
Bộ thay thế dễ dàng lắp đặt cho PIC24HJ128GP210A-E/PF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24HJ128GP210A-E/PF (cùng hình factor và footprint) — khác nhau ở Core Architecture, Operating Temperature, Package, ADC, Program Memory (Flash).
PIC24HJ128GP210A-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24HJ128GP210-I/PF
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →dsPIC33FJ128GP210A-I/PF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24HJ256GP210A-I/PF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24HJ128GP510A-I/PF
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
dsPIC33FJ256GP210A-I/PF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24HJ128GP210A-E/PF Tỷ lệ tối đa & tính chất điện
| Core Architecture | 16-bit PIC24H |
| CPU Speed | 40 MIPS at 40 MHz |
| Program Memory (Flash) | 128 KB (43K x 24) |
| Data Memory (RAM) | 8 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| Hộp | 100-pin TQFP (PF) 14x14 mm |
| Số chân | 100 |
| Nhiệt độ hoạt động | -40C to +125C (Automotive -E grade) |
| AEC-Q100 Qualification | Qualified |
| DMA Channels | 8 |
| Communication Peripherals | UART, SPI, I2C, ECAN |
| Kiểu lắp đặt | Surface Mount |
| Cấp MSL | 3 |
| Trạng thái RoHS | Compliant |
Cấu hình chân PIC24HJ128GP210A-E/PF
| Chân 1 | RP1/CN18/RD0 — Remappable peripheral / change notification / GPIO RD0 |
| Chân 2 | RP2/CN17/RD1 — Remappable peripheral / change notification / GPIO RD1 |
| Chân 3 | RP3/CN16/RD2 — Remappable peripheral / change notification / GPIO RD2 |
| Chân 4 | RP4/CN15/RD3 — Remappable peripheral / change notification / GPIO RD3 |
| Chân 5 | RP6/CN8/RD4 — Remappable peripheral / change notification / GPIO RD4 |
| Chân 6 | RP7/CN9/RD5 — Remappable peripheral / change notification / GPIO RD5 |
| Chân 7 | RP8/CN10/RD6 — Remappable peripheral / change notification / GPIO RD6 |
| Chân 8 | RP9/CN11/RD7 — Remappable peripheral / change notification / GPIO RD7 |
| Chân 9 | RP10/CN12/RD8 — Remappable peripheral / change notification / GPIO RD8 |
| Chân 10 | RP11/CN13/RD9 — Remappable peripheral / change notification / GPIO RD9 |
| Chân 11 | RP12/CN14/RD10 — Remappable peripheral / change notification / GPIO RD10 |
| Chân 12 | RP13/CN30/RD11 — Remappable peripheral / change notification / GPIO RD11 |
| Chân 13 | RP14/CN31/RD12 — Remappable peripheral / change notification / GPIO RD12 |
| Chân 14 | RP15/CN32/RD13 — Remappable peripheral / change notification / GPIO RD13 |
| Chân 15 | RP16/CN17/RD14 — Remappable peripheral / change notification / GPIO RD14 |
| Chân 16 | RP17/CN18/RD15 — Remappable peripheral / change notification / GPIO RD15 |
| Chân 17 | VDD — Digital supply voltage (3.3V nominal) |
| Chân 18 | VSS — Digital ground |
| Chân 19 | OSC1/RC12 — Crystal oscillator input |
| Chân 20 | OSC2/RC15 — Crystal oscillator output |
| Chân 21 | RA0 — GPIO RA0 |
| Chân 22 | RA1 — GPIO RA1 |
| Chân 23 | RA2 — GPIO RA2 |
| Chân 24 | RA3 — GPIO RA3 |
| Chân 25 | RA4 — GPIO RA4 |
| Chân 26 | RA5 — GPIO RA5 |
| Chân 27 | RA6 — GPIO RA6 |
| Chân 28 | RA7 — GPIO RA7 |
| Chân 29 | RB0 — GPIO / programming RB0 |
| Chân 30 | RB1 — GPIO / programming RB1 |
| Chân 31 | RB2 — GPIO RB2 |
| Chân 32 | RB3 — GPIO RB3 |
| Chân 33 | RB4 — GPIO RB4 |
| Chân 34 | RB5 — GPIO RB5 |
| Chân 35 | RB6 — ICSP programming clock |
| Chân 36 | RB7 — ICSP programming data |
| Chân 37 | RB8 — GPIO RB8 |
| Chân 38 | RB9 — GPIO RB9 |
| Chân 39 | RB10 — GPIO RB10 |
| Chân 40 | RB11 — GPIO RB11 |
| Chân 41 | RB12 — GPIO RB12 |
| Chân 42 | RB13 — GPIO RB13 |
| Chân 43 | RB14 — GPIO RB14 |
| Chân 44 | RB15 — GPIO RB15 |
| Chân 45 | RC0 — GPIO RC0 |
| Chân 46 | RC1 — GPIO RC1 |
| Chân 47 | RC2 — GPIO RC2 |
| Chân 48 | RC3 — GPIO RC3 |
| Chân 49 | RC4 — GPIO RC4 |
| Chân 50 | VSS — Digital ground |
| Chân 51 | VDD — Digital supply voltage (3.3V nominal) |
| Chân 52 | RC5 — GPIO RC5 |
| Chân 53 | RC6 — GPIO RC6 |
| Chân 54 | RC7 — GPIO RC7 |
| Chân 55 | RC8 — GPIO RC8 |
| Chân 56 | RC9 — GPIO RC9 |
| Chân 57 | RC10 — GPIO RC10 |
| Chân 58 | RC11 — GPIO RC11 |
| Chân 59 | RC12 — GPIO RC12 |
| Chân 60 | RC13 — GPIO RC13 |
| Chân 61 | RC14 — GPIO RC14 |
| Chân 62 | RC15 — GPIO RC15 |
| Chân 63 | RE0 — GPIO RE0 |
| Chân 64 | RE1 — GPIO RE1 |
| Chân 65 | RE2 — GPIO RE2 |
| Chân 66 | RE3 — GPIO RE3 |
| Chân 67 | RE4 — GPIO RE4 |
| Chân 68 | RE5 — GPIO RE5 |
| Chân 69 | RE6 — GPIO RE6 |
| Chân 70 | RE7 — GPIO RE7 |
| Chân 71 | RF0 — GPIO RF0 |
| Chân 72 | RF1 — GPIO RF1 |
| Chân 73 | RF2 — GPIO RF2 |
| Chân 74 | RF3 — GPIO RF3 |
| Chân 75 | RF4 — GPIO RF4 |
| Chân 76 | RF5 — GPIO RF5 |
| Chân 77 | RF6 — GPIO RF6 |
| Chân 78 | RF7 — GPIO RF7 |
| Chân 79 | RG0 — GPIO RG0 |
| Chân 80 | RG1 — GPIO RG1 |
| Chân 81 | RG2 — GPIO RG2 |
| Chân 82 | RG3 — GPIO RG3 |
| Chân 83 | RG6 — GPIO RG6 |
| Chân 84 | RG7 — GPIO RG7 |
| Chân 85 | RG8 — GPIO RG8 |
| Chân 86 | RG9 — GPIO RG9 |
| Chân 87 | MCLR — Master Clear (reset) input |
| Chân 88 | RG13 — GPIO RG13 |
| Chân 89 | RG14 — GPIO RG14 |
| Chân 90 | RG15 — GPIO RG15 |
| Chân 91 | VDD — Digital supply voltage (3.3V nominal) |
| Chân 92 | VSS — Digital ground |
| Chân 93 | RF8 — GPIO RF8 |
| Chân 94 | RF9 — GPIO RF9 |
| Chân 95 | RF10 — GPIO RF10 |
| Chân 96 | RF11 — GPIO RF11 |
| Chân 97 | RF12 — GPIO RF12 |
| Chân 98 | RF13 — GPIO RF13 |
| Chân 99 | AVDD — Analog supply voltage |
| Chân 100 | AVSS — Analog ground |
Ứng dụng tiêu biểu
PIC24HJ128GP210A-E/PF phù hợp cho 6 Áp dụngs: Automotive Body Control Module, Industrial Motor Control (BLDC / PMSM), Digital Power Conversion (SMPS), Industrial Sensor Hub / Data Logger, Uninterruptible Power Supply (UPS) Controller, Medical Monitoring Equipment (Non-Life-Critical).
Automotive Body Control Module
The PIC24HJ128GP210A-E/PF is an excellent fit for automotive body control modules thanks to its AEC-Q100 qualification and -40C to +125C operating range per the -E temperature grade. Its ECAN peripheral supports body-class network speeds, while 8 KB RAM and 128 KB Flash comfortably hold lighting, mirror, and door-lock state-machine firmware. The 40 MIPS CPU executes 16-bit PID loops for HVAC damper control and ambient-light sensor fusion at low latency, and the DMA controller offloads repetitive register-to-memory transfers to free the core for application logic. Pin compatibility with the dsPIC33F family allows painless migration when signal-processing requirements grow.
Được đề xuất
Industrial Motor Control (BLDC / PMSM)
For three-phase brushless DC or permanent-magnet synchronous motor control, the PIC24HJ128GP210A-E/PF provides the deterministic 40 MIPS throughput required to run sensorless or Hall-sensor-based commutation at switching frequencies up to 25 kHz. Its 12-bit ADC captures phase-current shunt signals while DMA streams conversion results into RAM without CPU intervention. Designers targeting higher-end field-oriented control should evaluate the pin-compatible dsPIC33FJ128GP210A, which adds hardware MAC instructions and dedicated motor-control PWM peripherals that offload Park/Clarke transforms from the core.
Được đề xuất
Digital Power Conversion (SMPS)
The PIC24HJ128GP210A-E/PF fits mid-power digital SMPS controllers including PFC, LLC, and phase-shifted full-bridge topologies where its 40 MIPS core executes digital compensation loops at 100 kHz+ switching frequencies. The 12-bit ADC with dedicated sample-and-hold captures voltage and current sense signals with sub-microsecond latency, while DMA pumps conversion data into PID controller buffers without CPU overhead. The high-resolution PWM peripheral supports duty-cycle adjustments in 8.5 ns increments at 40 MHz peripheral clock, enabling fine digital current-mode control.
Được đề xuất
Industrial Sensor Hub / Data Logger
Industrial sensor hubs and standalone data loggers leverage the PIC24HJ128GP210A-E/PF's 128 KB Flash for embedded file-system support and its 8 KB RAM for time-stamped sample buffers. The UART/SPI/I2C ports connect to external sensors, FRAM, or RTC chips, while ECAN interfaces to industrial networks. The -40C to +125C temperature range supports deployment in factory-floor enclosures and outdoor cabinets without additional thermal conditioning.
Được đề xuất
Uninterruptible Power Supply (UPS) Controller
Online UPS systems rely on the PIC24HJ128GP210A-E/PF to monitor battery state-of-charge, mains voltage, and inverter output in real time. Its 12-bit ADC and DMA controller capture waveform samples at the PWM rate while the 40 MIPS core runs power-quality algorithms and executes battery management state machines. The -E temperature grade supports enclosed battery cabinets where ambient can reach +60C, while the AEC-Q100 pedigree brings robustness expected in mission-critical power systems.
Được đề xuất
Medical Monitoring Equipment (Non-Life-Critical)
For non-life-critical medical monitoring devices such as infusion pump controllers, blood-pressure monitors, or laboratory instrumentation, the PIC24HJ128GP210A-E/PF delivers the deterministic 16-bit performance needed for sensor signal conditioning and user-interface control. The AEC-Q100 qualification supports deployment in clinical environments with strict reliability expectations. Engineers must add appropriate medical-grade isolation, redundant supervision, and comply with IEC 60601-1 if pursuing a regulated medical device design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24HJ128GP210A-E/PF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24HJ128GP210A-I/PF | PIC24HJ128GP210-I/PF | dsPIC33FJ128GP210A-I/PF | PIC24HJ256GP210A-I/PF | PIC24HJ128GP510A-I/PF | dsPIC33FJ256GP210A-I/PF |
|---|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (PF) 14x14 mm | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same | 100-pin TQFP (PF) 14x14 mm - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB | 128 KB | 256 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 16 KB |
| CPU Performance | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Temperature Grade | -40C to +125C (Automotive -E) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| AEC-Q100 Qualified | Yes | No | No | No | No | No | No |
| DSP Engine | No | No | No | Yes (DSP engine with MAC) | No | No | Yes (DSP engine with MAC) |
| Operating Voltage | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V | 3.0V to 3.6V |
Bảo phân biệt quan trọng
- AEC-Q100 qualified automotive temperature grade (vsPIC24HJ128GP210A-I/PF)
- DSP-capable drop-in migration path (vsPIC24HJ128GP510A-I/PF)
- 128 KB Flash optimized for cost-sensitive applications (vsPIC24HJ256GP210A-I/PF)
Ghi chú thiết kế
Decouple every VDD/VSS pair with a 100 nF X7R ceramic placed within 5 mm of the pin, and add one bulk 10 uF tantalum or ceramic capacitor on each major supply rail. The PIC24HJ128GP210A-E/PF draws a peak transient of approximately 100 mA during Flash programming; undersized decoupling may trigger brown-out resets. Isolate AVDD from VDD with a ferrite bead if analog accuracy is required, and tie AVSS to VSS with a single-point ground star.
Reserve pins RB6 and RB7 for ICSP programming - do not load them with low-impedance circuitry that would interfere with the programmer. The 100-pin TQFP (PF) has a 14x14 mm footprint with 0.5 mm pitch; route inner-pin signals on internal layers and break out power pins with wide pours. Place the external crystal within 8 mm of OSC1/OSC2 with grounded guard traces to minimize EMI pickup.
Do not confuse the -E (automotive, -40C to +125C, AEC-Q100) temperature grade with the -I (industrial, -40C to +85C) grade when ordering; the -I variant is not AEC-Q100 qualified and may fail automotive qualification testing. Verify that your firmware configures the watchdog timer and brown-out reset (BOR) on every power-up, since enabling BOR at 2.7V prevents corrupted Flash execution during supply droop. When migrating to the dsPIC33F, review peripheral libraries because DSP register names differ from PIC24H.
Estimated: the PIC24HJ128GP210A-E/PF dissipates approximately 240 mW at 40 MIPS with all peripherals active at 3.3V. The 100-pin TQFP thermal resistance theta_JA is approximately 39 C/W on a 4-layer JEDEC test board, yielding a junction temperature rise of about 9.4 C above ambient at typical operating loads. At +125C ambient, ensure adequate PCB copper area (at least 1 square inch of 2-oz ground pour) to keep junction below the +150C maximum.
Thông tin tuân thủ
AEC-Q100 qualification confirmed per the -E temperature grade designation. RoHS compliance verified from Microchip product page. Halogen-free status not confirmed from the verified web data - set to unknown.
