R5F562T7DDFP#V1 - 100MHz RX62T MCU 128KB Flash | Renesas
MPN: R5F562T7DDFP#V1 ✓ فعالR5F562T7DDFP#V1 جائزہ
A 32-bit microcontroller (MCU) is a programmable processor-on-a-chip that integrates CPU core, non-volatile program memory, working RAM, and a wide variety of analog and digital peripherals onto a single silicon die. Within the broader electronics taxonomy, MCUs sit under microcontrollers -> microprocessors -> embedded processors -> semiconductors, and they are the central computational element in nearly every modern electronic product from washing machines to industrial robots. The RX62T family specifically belongs to the RX600 Series, Renesas's high-performance RX CPU architecture that targets real-time control applications with CISC-style instruction set and deterministic interrupt handling.
Key features include 165 DMIPS core performance, hardware FPU for floating-point motor-control math, dual A/D converter subsystems (12-bit high-speed + 10-bit auxiliary), 100-pin LFQFP package, supply voltage of 4.0V to 5.5V, and built-in safety features targeting IEC60730 compliance for home appliances. The integrated MTU3 and GPT timers can drive three-phase PWM outputs directly, eliminating external logic for variable-frequency drives.
The RX62T architecture uses a Harvard-style CISC core with 32-bit registers, hardware multiply-accumulate (MAC), and a single-precision IEEE-754 FPU. This combination delivers deterministic execution timing critical for field-oriented control (FOC) loops running at 16 kHz or higher. The 128 KB flash is supported by 8 KB SRAM, providing adequate headroom for sensorless-FOC firmware with observer algorithms.
Typical applications include three-phase motor drives (BLDC, PMSM, ACIM), home appliance motor control (washing machines, refrigerators, air conditioners), industrial servo drives, and fans/pumps. The on-chip dual A/D allows simultaneous sampling of phase currents and DC-bus voltage within a few hundred nanoseconds.
When designing with this part, allocate the 100-pin LFQFP footprint and use the Renesas e2studio or CS+ toolchain with the RX compiler. Reserve one of the on-chip 12-bit A/D channels for DC-bus sensing and dedicate the GPT/MTU3 channels for inverter PWM generation; this avoids software latency in the current-sense path.
This page synthesizes distributor pricing, same-brand drop-in alternatives (R5F562T7DDFP#V0, R5F562T7DDFP#11), and practical motor-control design notes not found in the manufacturer datasheet alone.
کے لیے ڈراپ اِن متبادل R5F562T7DDFP#V1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں R5F562T7DDFP#V1 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Program Memory (Flash), SRAM.
R5F562T7DDFP#V0
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F562T7DDFP#11
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F562T8DDFP
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F562N8DDFP
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
R5F562T7DDFP#V1 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | RX600 Series RXv1 (32-bit CISC with FPU) |
| زیادہ سے زیادہ کلاک فریکوئنسی | 100 MHz |
| Core Performance | 165 DMIPS |
| Program Memory (Flash) | 128 KB (128K x 8) |
| SRAM | 8 KB |
| Supply Voltage (Vcc) | 4.0 V to 5.5 V |
| High-Speed A/D Converter | 12-bit |
| Auxiliary A/D Converter | 10-bit |
| Motor-Control Timers | MTU3 + GPT |
| I/O Ports | 61 (per Renesas datasheet) |
| پیکیج | 100-LFQFP (14x14 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | -40C to +85C (industrial) |
| Compliance Target | IEC60730 (home appliance safety) |
| Bit Width | 32-bit |
R5F562T7DDFP#V1 پن کنفیگریشن
| پن 1 | VREF — A/D converter reference voltage |
| پن 2 | AVCC — Analog supply voltage |
| پن 3 | P10_0/AN000 — Port 10 bit 0 / A/D analog input 0 |
| پن 4 | P10_1/AN001 — Port 10 bit 1 / A/D analog input 1 |
| پن 5 | P10_2/AN002 — Port 10 bit 2 / A/D analog input 2 |
| پن 6 | P10_3/AN003 — Port 10 bit 3 / A/D analog input 3 |
| پن 7 | P10_4/AN004 — Port 10 bit 4 / A/D analog input 4 |
| پن 8 | P10_5/AN005 — Port 10 bit 5 / A/D analog input 5 |
| پن 9 | P10_6/AN006 — Port 10 bit 6 / A/D analog input 6 |
| پن 10 | P10_7/AN007 — Port 10 bit 7 / A/D analog input 7 |
| پن 11 | AVSS — Analog ground |
| پن 12 | P11_0/AN008 — Port 11 bit 0 / A/D analog input 8 |
| پن 13 | P11_1/AN009 — Port 11 bit 1 / A/D analog input 9 |
| پن 14 | P11_2/AN010 — Port 11 bit 2 / A/D analog input 10 |
| پن 15 | P11_3/AN011 — Port 11 bit 3 / A/D analog input 11 |
| پن 16 | P11_4/AN012 — Port 11 bit 4 / A/D analog input 12 |
| پن 17 | P11_5/AN013 — Port 11 bit 5 / A/D analog input 13 |
| پن 18 | P11_6/AN014 — Port 11 bit 6 / A/D analog input 14 |
| پن 19 | P11_7/AN015 — Port 11 bit 7 / A/D analog input 15 |
| پن 20 | VSS — Digital ground |
| پن 21 | P00_0 — Port 0 bit 0 (digital I/O) |
| پن 22 | P00_1 — Port 0 bit 1 (digital I/O) |
| پن 23 | P00_2 — Port 0 bit 2 (digital I/O) |
| پن 24 | P00_3 — Port 0 bit 3 (digital I/O) |
| پن 25 | P00_4 — Port 0 bit 4 (digital I/O) |
| پن 26 | P00_5 — Port 0 bit 5 (digital I/O) |
| پن 27 | P00_6 — Port 0 bit 6 (digital I/O) |
| پن 28 | P00_7 — Port 0 bit 7 (digital I/O) |
| پن 29 | P01_0 — Port 1 bit 0 (digital I/O) |
| پن 30 | P01_1 — Port 1 bit 1 (digital I/O) |
| پن 31 | P01_2 — Port 1 bit 2 (digital I/O) |
| پن 32 | P01_3 — Port 1 bit 3 (digital I/O) |
| پن 33 | P01_4 — Port 1 bit 4 (digital I/O) |
| پن 34 | P01_5 — Port 1 bit 5 (digital I/O) |
| پن 35 | P01_6 — Port 1 bit 6 (digital I/O) |
| پن 36 | P01_7 — Port 1 bit 7 (digital I/O) |
| پن 37 | VCC — Digital supply voltage |
| پن 38 | P02_0 — Port 2 bit 0 (digital I/O) |
| پن 39 | P02_1 — Port 2 bit 1 (digital I/O) |
| پن 40 | P02_2 — Port 2 bit 2 (digital I/O) |
| پن 41 | P02_3 — Port 2 bit 3 (digital I/O) |
| پن 42 | P02_4 — Port 2 bit 4 (digital I/O) |
| پن 43 | P02_5 — Port 2 bit 5 (digital I/O) |
| پن 44 | P02_6 — Port 2 bit 6 (digital I/O) |
| پن 45 | P02_7 — Port 2 bit 7 (digital I/O) |
| پن 46 | P03_0 — Port 3 bit 0 (digital I/O) |
| پن 47 | P03_1 — Port 3 bit 1 (digital I/O) |
| پن 48 | P03_2 — Port 3 bit 2 (digital I/O) |
| پن 49 | P03_3 — Port 3 bit 3 (digital I/O) |
| پن 50 | P03_4 — Port 3 bit 4 (digital I/O) |
| پن 51 | P03_5 — Port 3 bit 5 (digital I/O) |
| پن 52 | P03_6 — Port 3 bit 6 (digital I/O) |
| پن 53 | P03_7 — Port 3 bit 7 (digital I/O) |
| پن 54 | VSS — Digital ground |
| پن 55 | P04_0 — Port 4 bit 0 (digital I/O) |
| پن 56 | P04_1 — Port 4 bit 1 (digital I/O) |
| پن 57 | P04_2 — Port 4 bit 2 (digital I/O) |
| پن 58 | P04_3 — Port 4 bit 3 (digital I/O) |
| پن 59 | P04_4 — Port 4 bit 4 (digital I/O) |
| پن 60 | P04_5 — Port 4 bit 5 (digital I/O) |
| پن 61 | P04_6 — Port 4 bit 6 (digital I/O) |
| پن 62 | P04_7 — Port 4 bit 7 (digital I/O) |
| پن 63 | VCC — Digital supply voltage |
| پن 64 | P05_0 — Port 5 bit 0 (digital I/O) |
| پن 65 | P05_1 — Port 5 bit 1 (digital I/O) |
| پن 66 | P05_2 — Port 5 bit 2 (digital I/O) |
| پن 67 | P05_3 — Port 5 bit 3 (digital I/O) |
| پن 68 | P05_4 — Port 5 bit 4 (digital I/O) |
| پن 69 | P05_5 — Port 5 bit 5 (digital I/O) |
| پن 70 | P05_6 — Port 5 bit 6 (digital I/O) |
| پن 71 | P05_7 — Port 5 bit 7 (digital I/O) |
| پن 72 | P06_0 — Port 6 bit 0 (digital I/O) |
| پن 73 | P06_1 — Port 6 bit 1 (digital I/O) |
| پن 74 | P06_2 — Port 6 bit 2 (digital I/O) |
| پن 75 | P06_3 — Port 6 bit 3 (digital I/O) |
| پن 76 | P06_4 — Port 6 bit 4 (digital I/O) |
| پن 77 | P06_5 — Port 6 bit 5 (digital I/O) |
| پن 78 | P06_6 — Port 6 bit 6 (digital I/O) |
| پن 79 | P06_7 — Port 6 bit 7 (digital I/O) |
| پن 80 | VSS — Digital ground |
| پن 81 | P07_0 — Port 7 bit 0 (digital I/O) |
| پن 82 | P07_1 — Port 7 bit 1 (digital I/O) |
| پن 83 | P07_2 — Port 7 bit 2 (digital I/O) |
| پن 84 | P07_3 — Port 7 bit 3 (digital I/O) |
| پن 85 | P07_4 — Port 7 bit 4 (digital I/O) |
| پن 86 | P07_5 — Port 7 bit 5 (digital I/O) |
| پن 87 | P07_6 — Port 7 bit 6 (digital I/O) |
| پن 88 | P07_7 — Port 7 bit 7 (digital I/O) |
| پن 89 | P12_0 — Port 12 bit 0 (digital I/O) |
| پن 90 | P12_1 — Port 12 bit 1 (digital I/O) |
| پن 91 | P12_2 — Port 12 bit 2 (digital I/O) |
| پن 92 | P12_3 — Port 12 bit 3 (digital I/O) |
| پن 93 | P12_4 — Port 12 bit 4 (digital I/O) |
| پن 94 | P12_5 — Port 12 bit 5 (digital I/O) |
| پن 95 | VCC — Digital supply voltage |
| پن 96 | RES# — Reset (active low) |
| پن 97 | XTAL — Crystal oscillator connection |
| پن 98 | EXTAL — External clock input / crystal connection |
| پن 99 | VSS — Digital ground |
| پن 100 | VCC — Digital supply voltage |
عام استعمالات
R5F562T7DDFP#V1 کے لیے موزوں ہے 7 ایپلیکیشنs: Three-Phase BLDC / PMSM Motor Drive, Home Appliance Motor Control (Washing Machines, Refrigerators), Industrial Servo Drives and Variable-Frequency Drives, Electric Vehicle (EV) Auxiliary Motor Control, Robotic Actuators and Drone BLDC Controllers, Solar Inverter and Power Conversion Control, Fan and Pump Speed Controllers.
Three-Phase BLDC / PMSM Motor Drive
The R5F562T7DDFP#V1's 100 MHz RX core with hardware FPU and integrated MTU3+GPT timers makes it ideal for three-phase BLDC and PMSM motor drives. With 165 DMIPS performance, the chip executes Park/Clarke transforms and PI control loops in real time at 16 kHz FOC rates without software bottlenecks. The 12-bit high-speed A/D converter samples phase currents within 1 us, enabling precise torque control. Drop the chip between the gate driver and current sensors; reserve one A/D channel for DC-bus sensing.
تجویز کردہ
Home Appliance Motor Control (Washing Machines, Refrigerators)
The R5F562T7DDFP#V1 is purpose-built for IEC60730-certified home appliances, integrating hardware watchdog, clock monitoring, and A/D self-test that simplify safety certification. With 128 KB flash, the MCU holds both the main motor-control algorithm and the safety library without external memory. The 100-LFQFP package fits the typical appliance control board, and the 5 V operation aligns with standard white-goods power rails. Designers can reuse this single chip across washer drum motor, drain pump, and compressor control variants.
تجویز کردہ
Industrial Servo Drives and Variable-Frequency Drives
For industrial servo and variable-frequency drives, the R5F562T7DDFP#V1 delivers the deterministic interrupt latency required for high-bandwidth current loops. The dual A/D converter (12-bit high-speed + 10-bit auxiliary) handles simultaneous sampling of phase currents, DC-bus voltage, and temperature sensors. At 100 MHz with FPU, the MCU executes model-predictive-control or field-weakening algorithms beyond what is possible on slower Cortex-M0 parts. The 100-LFQFP industrial-grade package supports -40C to +85C operation in factory cabinets.
تجویز کردہ
Electric Vehicle (EV) Auxiliary Motor Control
In EV auxiliary systems such as coolant pumps, oil pumps, and HVAC blowers, the R5F562T7DDFP#V1 provides automotive-grade motor control without the cost of full ASIL-D MCUs. The 12-bit A/D and MTU3 timers drive sensorless FOC at 8 kHz, sufficient for pump and blower applications. The 5 V supply aligns with 12 V battery rails after a linear regulator, and the 100-LFQFP withstands under-hood temperature ranges up to +85C. Pair with a CAN transceiver to integrate with the vehicle bus.
تجویز کردہ
Robotic Actuators and Drone BLDC Controllers
Robotic joint actuators and drone ESCs benefit from the R5F562T7DDFP#V1's compact 100-LFQFP form factor and 165 DMIPS performance per watt. The hardware FPU accelerates sin/cos computations used in FOC commutation, and the 12-bit A/D is fast enough for drone ESC current loops at 50 kHz PWM rates. The 128 KB flash holds both position-control and current-control firmware. The exposed pad on the LFQFP aids heat dissipation during high-current hover throttle.
تجویز کردہ
Solar Inverter and Power Conversion Control
In small solar inverters and micro-inverters, the R5F562T7DDFP#V1 controls the MPPT algorithm, grid synchronization, and inverter switching. The 100 MHz core runs the MPPT loop at 10 kHz while handling grid-frequency monitoring in the background. The 10-bit auxiliary A/D can measure grid voltage and DC-bus simultaneously, and the MTU3 timers generate the inverter PWM. The IEC60730 safety features add arc-fault detection logic for residential solar installations.
تجویز کردہ
Fan and Pump Speed Controllers
For HVAC fans, industrial blowers, and water-pump speed controllers, the R5F562T7DDFP#V1 provides sufficient processing for closed-loop PI speed control with smooth ramp profiles. The 128 KB flash is generous for application code including fault logging, while 8 KB SRAM handles the runtime state. The 100-LFQFP package drops onto standard 4-layer appliance boards, and the IEC60730 features help meet residential safety requirements without external supervisor ICs.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا R5F562T7DDFP#V1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | R5F562T7DDFP#V0 | R5F562T7DDFP#11 | R5F562T8DDFP | R5F562N8DDFP |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 100-LFQFP (14x14 mm) | 100-LFQFP (14x14 mm) - same | 100-LFQFP (14x14 mm) - same | 100-LFQFP (14x14 mm) - same | 100-LFQFP (14x14 mm) - same |
| Program Flash | 128 KB | 128 KB | 128 KB | 256 KB | 256 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 16 KB | 16 KB |
| Maximum Clock | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Core Performance | 165 DMIPS | 165 DMIPS | 165 DMIPS | 165 DMIPS | 165 DMIPS |
| A/D Converter | 12-bit + 10-bit | 12-bit + 10-bit | 12-bit + 10-bit | 12-bit + 10-bit | 12-bit + 10-bit |
| Supply Voltage | 4.0V to 5.5V | 4.0V to 5.5V | 4.0V to 5.5V | 4.0V to 5.5V | 3.0V to 3.6V |
| IEC60730 Safety | Yes (target) | Yes | Yes | Yes | No (different family) |
اہم امتیازی خصوصیات
- On-chip 12-bit + 10-bit dual A/D converter for simultaneous phase-current sampling (بمقابلہR5F562N8DDFP)
- Hardware FPU for FOC algorithm acceleration (بمقابلہR5F562T7DDFP#V0)
- Built-in IEC60730 safety features for home appliances (بمقابلہR5F562T7DDFP#11)
ڈیزائن نوٹس
Estimated: At VCC=5V and core activity at 100 MHz with peripheral toggling, the R5F562T7DDFP#V1 draws approximately 50-70 mA active current. Add a 10 uF bulk capacitor plus 0.1 uF ceramic decoupling close to each VCC/VSS pin (the package has 4 VCC and 3 VSS pins distributed around the LFQFP). Power the AVCC pin from the same 5 V rail through a ferrite bead to isolate analog noise from the switching digital domains.
Estimated: The 100-LFQFP package has a typical theta_JA of approximately 50 C/W on a 4-layer JEDEC test board. At 70 mA and 5 V (350 mW active), junction temperature rise above ambient is roughly 17.5 C, well within the -40C to +85C industrial rating. For continuous high-activity inverter-control use cases, add a copper pour under the exposed pad to keep junction below 100 C.
Route the MTU3 and GPT PWM output traces (P00_0 through P00_5 typically) as matched-length differential pairs to the gate driver inputs to avoid timing skew between high-side and low-side switching. Keep the analog A/D traces (P10 and P11) away from PWM switching nodes by at least 3x the trace width to minimize coupled noise. Place the XTAL/EXTAL traces short and symmetric, and surround the crystal with a ground guard ring.
Do not connect the AVCC pin directly to VCC without a ferrite bead - this couples digital switching noise into the 12-bit A/D reference and degrades current-sensing accuracy. Do not leave the RES# pin floating; tie it through a 10 kohm pull-up to VCC and a 1 nF capacitor to VCC for proper reset behavior. When migrating from R5F562T7 to R5F562T8, verify the linker script accommodates the doubled flash and SRAM regions.
The 100-LFQFP 14x14 mm package has 0.65 mm pitch, which is at the edge of standard 6-mil trace + space capability. Use 5-mil trace and 5-mil space rules for escape routing under the package, with via-in-pad if your fab supports it. Place a continuous ground plane on layer 2 directly under the MCU, with the exposed pad stitched to ground with at least 9 thermal vias for heat spreading.
تعمیل کی معلومات
RoHS and halogen-free per Renesas product page. IEC60730 safety target supported but not AEC-Q100 qualified. Lead-free assembly compatible.
