R5F562T7DDFP#V1 - 100MHz RX62T MCU 128KB Flash | Renesas
MPN: R5F562T7DDFP#V1 ✓ Hoạt độngR5F562T7DDFP#V1 Tóm tắt
A 32-bit microcontroller (MCU) is a programmable processor-on-a-chip that integrates CPU core, non-volatile program memory, working RAM, and a wide variety of analog and digital peripherals onto a single silicon die. Within the broader electronics taxonomy, MCUs sit under microcontrollers -> microprocessors -> embedded processors -> semiconductors, and they are the central computational element in nearly every modern electronic product from washing machines to industrial robots. The RX62T family specifically belongs to the RX600 Series, Renesas's high-performance RX CPU architecture that targets real-time control applications with CISC-style instruction set and deterministic interrupt handling.
Key features include 165 DMIPS core performance, hardware FPU for floating-point motor-control math, dual A/D converter subsystems (12-bit high-speed + 10-bit auxiliary), 100-pin LFQFP package, supply voltage of 4.0V to 5.5V, and built-in safety features targeting IEC60730 compliance for home appliances. The integrated MTU3 and GPT timers can drive three-phase PWM outputs directly, eliminating external logic for variable-frequency drives.
The RX62T architecture uses a Harvard-style CISC core with 32-bit registers, hardware multiply-accumulate (MAC), and a single-precision IEEE-754 FPU. This combination delivers deterministic execution timing critical for field-oriented control (FOC) loops running at 16 kHz or higher. The 128 KB flash is supported by 8 KB SRAM, providing adequate headroom for sensorless-FOC firmware with observer algorithms.
Typical applications include three-phase motor drives (BLDC, PMSM, ACIM), home appliance motor control (washing machines, refrigerators, air conditioners), industrial servo drives, and fans/pumps. The on-chip dual A/D allows simultaneous sampling of phase currents and DC-bus voltage within a few hundred nanoseconds.
When designing with this part, allocate the 100-pin LFQFP footprint and use the Renesas e2studio or CS+ toolchain with the RX compiler. Reserve one of the on-chip 12-bit A/D channels for DC-bus sensing and dedicate the GPT/MTU3 channels for inverter PWM generation; this avoids software latency in the current-sense path.
This page synthesizes distributor pricing, same-brand drop-in alternatives (R5F562T7DDFP#V0, R5F562T7DDFP#11), and practical motor-control design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho R5F562T7DDFP#V1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với R5F562T7DDFP#V1 (cùng hình factor và footprint) — khác nhau ở Program Memory (Flash), SRAM.
R5F562T7DDFP#V0
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
R5F562T7DDFP#11
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
R5F562T8DDFP
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
R5F562N8DDFP
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
R5F562T7DDFP#V1 Tỷ lệ tối đa & tính chất điện
| Core | RX600 Series RXv1 (32-bit CISC with FPU) |
| Tần số xung maksimum | 100 MHz |
| Core Performance | 165 DMIPS |
| Program Memory (Flash) | 128 KB (128K x 8) |
| SRAM | 8 KB |
| Supply Voltage (Vcc) | 4.0 V to 5.5 V |
| High-Speed A/D Converter | 12-bit |
| Auxiliary A/D Converter | 10-bit |
| Motor-Control Timers | MTU3 + GPT |
| I/O Ports | 61 (per Renesas datasheet) |
| Hộp | 100-LFQFP (14x14 mm) |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40C to +85C (industrial) |
| Compliance Target | IEC60730 (home appliance safety) |
| Bit Width | 32-bit |
Cấu hình chân R5F562T7DDFP#V1
| Chân 1 | VREF — A/D converter reference voltage |
| Chân 2 | AVCC — Analog supply voltage |
| Chân 3 | P10_0/AN000 — Port 10 bit 0 / A/D analog input 0 |
| Chân 4 | P10_1/AN001 — Port 10 bit 1 / A/D analog input 1 |
| Chân 5 | P10_2/AN002 — Port 10 bit 2 / A/D analog input 2 |
| Chân 6 | P10_3/AN003 — Port 10 bit 3 / A/D analog input 3 |
| Chân 7 | P10_4/AN004 — Port 10 bit 4 / A/D analog input 4 |
| Chân 8 | P10_5/AN005 — Port 10 bit 5 / A/D analog input 5 |
| Chân 9 | P10_6/AN006 — Port 10 bit 6 / A/D analog input 6 |
| Chân 10 | P10_7/AN007 — Port 10 bit 7 / A/D analog input 7 |
| Chân 11 | AVSS — Analog ground |
| Chân 12 | P11_0/AN008 — Port 11 bit 0 / A/D analog input 8 |
| Chân 13 | P11_1/AN009 — Port 11 bit 1 / A/D analog input 9 |
| Chân 14 | P11_2/AN010 — Port 11 bit 2 / A/D analog input 10 |
| Chân 15 | P11_3/AN011 — Port 11 bit 3 / A/D analog input 11 |
| Chân 16 | P11_4/AN012 — Port 11 bit 4 / A/D analog input 12 |
| Chân 17 | P11_5/AN013 — Port 11 bit 5 / A/D analog input 13 |
| Chân 18 | P11_6/AN014 — Port 11 bit 6 / A/D analog input 14 |
| Chân 19 | P11_7/AN015 — Port 11 bit 7 / A/D analog input 15 |
| Chân 20 | VSS — Digital ground |
| Chân 21 | P00_0 — Port 0 bit 0 (digital I/O) |
| Chân 22 | P00_1 — Port 0 bit 1 (digital I/O) |
| Chân 23 | P00_2 — Port 0 bit 2 (digital I/O) |
| Chân 24 | P00_3 — Port 0 bit 3 (digital I/O) |
| Chân 25 | P00_4 — Port 0 bit 4 (digital I/O) |
| Chân 26 | P00_5 — Port 0 bit 5 (digital I/O) |
| Chân 27 | P00_6 — Port 0 bit 6 (digital I/O) |
| Chân 28 | P00_7 — Port 0 bit 7 (digital I/O) |
| Chân 29 | P01_0 — Port 1 bit 0 (digital I/O) |
| Chân 30 | P01_1 — Port 1 bit 1 (digital I/O) |
| Chân 31 | P01_2 — Port 1 bit 2 (digital I/O) |
| Chân 32 | P01_3 — Port 1 bit 3 (digital I/O) |
| Chân 33 | P01_4 — Port 1 bit 4 (digital I/O) |
| Chân 34 | P01_5 — Port 1 bit 5 (digital I/O) |
| Chân 35 | P01_6 — Port 1 bit 6 (digital I/O) |
| Chân 36 | P01_7 — Port 1 bit 7 (digital I/O) |
| Chân 37 | VCC — Digital supply voltage |
| Chân 38 | P02_0 — Port 2 bit 0 (digital I/O) |
| Chân 39 | P02_1 — Port 2 bit 1 (digital I/O) |
| Chân 40 | P02_2 — Port 2 bit 2 (digital I/O) |
| Chân 41 | P02_3 — Port 2 bit 3 (digital I/O) |
| Chân 42 | P02_4 — Port 2 bit 4 (digital I/O) |
| Chân 43 | P02_5 — Port 2 bit 5 (digital I/O) |
| Chân 44 | P02_6 — Port 2 bit 6 (digital I/O) |
| Chân 45 | P02_7 — Port 2 bit 7 (digital I/O) |
| Chân 46 | P03_0 — Port 3 bit 0 (digital I/O) |
| Chân 47 | P03_1 — Port 3 bit 1 (digital I/O) |
| Chân 48 | P03_2 — Port 3 bit 2 (digital I/O) |
| Chân 49 | P03_3 — Port 3 bit 3 (digital I/O) |
| Chân 50 | P03_4 — Port 3 bit 4 (digital I/O) |
| Chân 51 | P03_5 — Port 3 bit 5 (digital I/O) |
| Chân 52 | P03_6 — Port 3 bit 6 (digital I/O) |
| Chân 53 | P03_7 — Port 3 bit 7 (digital I/O) |
| Chân 54 | VSS — Digital ground |
| Chân 55 | P04_0 — Port 4 bit 0 (digital I/O) |
| Chân 56 | P04_1 — Port 4 bit 1 (digital I/O) |
| Chân 57 | P04_2 — Port 4 bit 2 (digital I/O) |
| Chân 58 | P04_3 — Port 4 bit 3 (digital I/O) |
| Chân 59 | P04_4 — Port 4 bit 4 (digital I/O) |
| Chân 60 | P04_5 — Port 4 bit 5 (digital I/O) |
| Chân 61 | P04_6 — Port 4 bit 6 (digital I/O) |
| Chân 62 | P04_7 — Port 4 bit 7 (digital I/O) |
| Chân 63 | VCC — Digital supply voltage |
| Chân 64 | P05_0 — Port 5 bit 0 (digital I/O) |
| Chân 65 | P05_1 — Port 5 bit 1 (digital I/O) |
| Chân 66 | P05_2 — Port 5 bit 2 (digital I/O) |
| Chân 67 | P05_3 — Port 5 bit 3 (digital I/O) |
| Chân 68 | P05_4 — Port 5 bit 4 (digital I/O) |
| Chân 69 | P05_5 — Port 5 bit 5 (digital I/O) |
| Chân 70 | P05_6 — Port 5 bit 6 (digital I/O) |
| Chân 71 | P05_7 — Port 5 bit 7 (digital I/O) |
| Chân 72 | P06_0 — Port 6 bit 0 (digital I/O) |
| Chân 73 | P06_1 — Port 6 bit 1 (digital I/O) |
| Chân 74 | P06_2 — Port 6 bit 2 (digital I/O) |
| Chân 75 | P06_3 — Port 6 bit 3 (digital I/O) |
| Chân 76 | P06_4 — Port 6 bit 4 (digital I/O) |
| Chân 77 | P06_5 — Port 6 bit 5 (digital I/O) |
| Chân 78 | P06_6 — Port 6 bit 6 (digital I/O) |
| Chân 79 | P06_7 — Port 6 bit 7 (digital I/O) |
| Chân 80 | VSS — Digital ground |
| Chân 81 | P07_0 — Port 7 bit 0 (digital I/O) |
| Chân 82 | P07_1 — Port 7 bit 1 (digital I/O) |
| Chân 83 | P07_2 — Port 7 bit 2 (digital I/O) |
| Chân 84 | P07_3 — Port 7 bit 3 (digital I/O) |
| Chân 85 | P07_4 — Port 7 bit 4 (digital I/O) |
| Chân 86 | P07_5 — Port 7 bit 5 (digital I/O) |
| Chân 87 | P07_6 — Port 7 bit 6 (digital I/O) |
| Chân 88 | P07_7 — Port 7 bit 7 (digital I/O) |
| Chân 89 | P12_0 — Port 12 bit 0 (digital I/O) |
| Chân 90 | P12_1 — Port 12 bit 1 (digital I/O) |
| Chân 91 | P12_2 — Port 12 bit 2 (digital I/O) |
| Chân 92 | P12_3 — Port 12 bit 3 (digital I/O) |
| Chân 93 | P12_4 — Port 12 bit 4 (digital I/O) |
| Chân 94 | P12_5 — Port 12 bit 5 (digital I/O) |
| Chân 95 | VCC — Digital supply voltage |
| Chân 96 | RES# — Reset (active low) |
| Chân 97 | XTAL — Crystal oscillator connection |
| Chân 98 | EXTAL — External clock input / crystal connection |
| Chân 99 | VSS — Digital ground |
| Chân 100 | VCC — Digital supply voltage |
Ứng dụng tiêu biểu
R5F562T7DDFP#V1 phù hợp cho 7 Áp dụngs: Three-Phase BLDC / PMSM Motor Drive, Home Appliance Motor Control (Washing Machines, Refrigerators), Industrial Servo Drives and Variable-Frequency Drives, Electric Vehicle (EV) Auxiliary Motor Control, Robotic Actuators and Drone BLDC Controllers, Solar Inverter and Power Conversion Control, Fan and Pump Speed Controllers.
Three-Phase BLDC / PMSM Motor Drive
The R5F562T7DDFP#V1's 100 MHz RX core with hardware FPU and integrated MTU3+GPT timers makes it ideal for three-phase BLDC and PMSM motor drives. With 165 DMIPS performance, the chip executes Park/Clarke transforms and PI control loops in real time at 16 kHz FOC rates without software bottlenecks. The 12-bit high-speed A/D converter samples phase currents within 1 us, enabling precise torque control. Drop the chip between the gate driver and current sensors; reserve one A/D channel for DC-bus sensing.
Được đề xuất
Home Appliance Motor Control (Washing Machines, Refrigerators)
The R5F562T7DDFP#V1 is purpose-built for IEC60730-certified home appliances, integrating hardware watchdog, clock monitoring, and A/D self-test that simplify safety certification. With 128 KB flash, the MCU holds both the main motor-control algorithm and the safety library without external memory. The 100-LFQFP package fits the typical appliance control board, and the 5 V operation aligns with standard white-goods power rails. Designers can reuse this single chip across washer drum motor, drain pump, and compressor control variants.
Được đề xuất
Industrial Servo Drives and Variable-Frequency Drives
For industrial servo and variable-frequency drives, the R5F562T7DDFP#V1 delivers the deterministic interrupt latency required for high-bandwidth current loops. The dual A/D converter (12-bit high-speed + 10-bit auxiliary) handles simultaneous sampling of phase currents, DC-bus voltage, and temperature sensors. At 100 MHz with FPU, the MCU executes model-predictive-control or field-weakening algorithms beyond what is possible on slower Cortex-M0 parts. The 100-LFQFP industrial-grade package supports -40C to +85C operation in factory cabinets.
Được đề xuất
Electric Vehicle (EV) Auxiliary Motor Control
In EV auxiliary systems such as coolant pumps, oil pumps, and HVAC blowers, the R5F562T7DDFP#V1 provides automotive-grade motor control without the cost of full ASIL-D MCUs. The 12-bit A/D and MTU3 timers drive sensorless FOC at 8 kHz, sufficient for pump and blower applications. The 5 V supply aligns with 12 V battery rails after a linear regulator, and the 100-LFQFP withstands under-hood temperature ranges up to +85C. Pair with a CAN transceiver to integrate with the vehicle bus.
Được đề xuất
Robotic Actuators and Drone BLDC Controllers
Robotic joint actuators and drone ESCs benefit from the R5F562T7DDFP#V1's compact 100-LFQFP form factor and 165 DMIPS performance per watt. The hardware FPU accelerates sin/cos computations used in FOC commutation, and the 12-bit A/D is fast enough for drone ESC current loops at 50 kHz PWM rates. The 128 KB flash holds both position-control and current-control firmware. The exposed pad on the LFQFP aids heat dissipation during high-current hover throttle.
Được đề xuất
Solar Inverter and Power Conversion Control
In small solar inverters and micro-inverters, the R5F562T7DDFP#V1 controls the MPPT algorithm, grid synchronization, and inverter switching. The 100 MHz core runs the MPPT loop at 10 kHz while handling grid-frequency monitoring in the background. The 10-bit auxiliary A/D can measure grid voltage and DC-bus simultaneously, and the MTU3 timers generate the inverter PWM. The IEC60730 safety features add arc-fault detection logic for residential solar installations.
Được đề xuất
Fan and Pump Speed Controllers
For HVAC fans, industrial blowers, and water-pump speed controllers, the R5F562T7DDFP#V1 provides sufficient processing for closed-loop PI speed control with smooth ramp profiles. The 128 KB flash is generous for application code including fault logging, while 8 KB SRAM handles the runtime state. The 100-LFQFP package drops onto standard 4-layer appliance boards, and the IEC60730 features help meet residential safety requirements without external supervisor ICs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho R5F562T7DDFP#V1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | R5F562T7DDFP#V0 | R5F562T7DDFP#11 | R5F562T8DDFP | R5F562N8DDFP |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 100-LFQFP (14x14 mm) | 100-LFQFP (14x14 mm) - same | 100-LFQFP (14x14 mm) - same | 100-LFQFP (14x14 mm) - same | 100-LFQFP (14x14 mm) - same |
| Program Flash | 128 KB | 128 KB | 128 KB | 256 KB | 256 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 16 KB | 16 KB |
| Maximum Clock | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Core Performance | 165 DMIPS | 165 DMIPS | 165 DMIPS | 165 DMIPS | 165 DMIPS |
| A/D Converter | 12-bit + 10-bit | 12-bit + 10-bit | 12-bit + 10-bit | 12-bit + 10-bit | 12-bit + 10-bit |
| Supply Voltage | 4.0V to 5.5V | 4.0V to 5.5V | 4.0V to 5.5V | 4.0V to 5.5V | 3.0V to 3.6V |
| IEC60730 Safety | Yes (target) | Yes | Yes | Yes | No (different family) |
Bảo phân biệt quan trọng
- On-chip 12-bit + 10-bit dual A/D converter for simultaneous phase-current sampling (vsR5F562N8DDFP)
- Hardware FPU for FOC algorithm acceleration (vsR5F562T7DDFP#V0)
- Built-in IEC60730 safety features for home appliances (vsR5F562T7DDFP#11)
Ghi chú thiết kế
Estimated: At VCC=5V and core activity at 100 MHz with peripheral toggling, the R5F562T7DDFP#V1 draws approximately 50-70 mA active current. Add a 10 uF bulk capacitor plus 0.1 uF ceramic decoupling close to each VCC/VSS pin (the package has 4 VCC and 3 VSS pins distributed around the LFQFP). Power the AVCC pin from the same 5 V rail through a ferrite bead to isolate analog noise from the switching digital domains.
Estimated: The 100-LFQFP package has a typical theta_JA of approximately 50 C/W on a 4-layer JEDEC test board. At 70 mA and 5 V (350 mW active), junction temperature rise above ambient is roughly 17.5 C, well within the -40C to +85C industrial rating. For continuous high-activity inverter-control use cases, add a copper pour under the exposed pad to keep junction below 100 C.
Route the MTU3 and GPT PWM output traces (P00_0 through P00_5 typically) as matched-length differential pairs to the gate driver inputs to avoid timing skew between high-side and low-side switching. Keep the analog A/D traces (P10 and P11) away from PWM switching nodes by at least 3x the trace width to minimize coupled noise. Place the XTAL/EXTAL traces short and symmetric, and surround the crystal with a ground guard ring.
Do not connect the AVCC pin directly to VCC without a ferrite bead - this couples digital switching noise into the 12-bit A/D reference and degrades current-sensing accuracy. Do not leave the RES# pin floating; tie it through a 10 kohm pull-up to VCC and a 1 nF capacitor to VCC for proper reset behavior. When migrating from R5F562T7 to R5F562T8, verify the linker script accommodates the doubled flash and SRAM regions.
The 100-LFQFP 14x14 mm package has 0.65 mm pitch, which is at the edge of standard 6-mil trace + space capability. Use 5-mil trace and 5-mil space rules for escape routing under the package, with via-in-pad if your fab supports it. Place a continuous ground plane on layer 2 directly under the MCU, with the exposed pad stitched to ground with at least 9 thermal vias for heat spreading.
Thông tin tuân thủ
RoHS and halogen-free per Renesas product page. IEC60730 safety target supported but not AEC-Q100 qualified. Lead-free assembly compatible.
