SI3216-C-FT Single-Channel Wideband SLIC/Codec | Skyworks
MPN: SI3216-C-FT ✓ فعالSI3216-C-FT جائزہ
A Subscriber Line Interface Concept, or SLIC, is an integrated analog interface that connects a telecommunications line to digital voice-processing equipment. A SLIC/codec combines functions such as line-driver control, voice-band signal conversion, and digital voice transport. The SI3216-C-FT places these functions into one interface IC for single-channel line-card, voice-gateway, and analog-handset designs, reducing the number of external interface components required.
Key features include dual-mode wideband operation up to 7 kHz and narrowband operation up to 3.4 kHz. Its 16-bit, 16 kHz sampling format supports enhanced voice-processing designs. Digital connectivity through GCI, PCM, and SPI gives the device flexibility for connecting with voice codecs, processors, line-card controllers, and other telecommunications equipment. The operating temperature range is 0 °C to 70 °C, making the part suited to controlled commercial telecom environments.
The SI3216-C-FT integrates a BJT/inductor DC-DC converter to support the line interface and associated voltage-generation requirements. The converter topology is significant because the SLIC must handle a line-side voltage environment while preserving a regulated low-voltage supply for its internal codec and control logic. The manufacturer specifies a maximum power rating of 700 mW, but designers should evaluate actual dissipation from the supply voltage, operating mode, and line conditions rather than treating the rating as continuous dissipation.
Typical uses include telephone line cards, voice gateways, subscriber-line access equipment, and analog handsets. For a new design, the three digital interfaces allow the vendor to select the most appropriate connection to the host processor: GCI for compatible line-interface controllers, PCM for digital PCM streams, or SPI for a compact host-control connection. External component selection and protection must follow the manufacturer’s recommended application circuit.
The most important design consideration is preserving the intended line-side power and signal environment. Keep the SLIC’s sensitive analog paths compact, follow the manufacturer’s grounding and decoupling guidance, and account for the DC-DC converter’s magnetic-component layout. Confirm that the selected magnetics and protection network support the target line voltage, ringing, current, and codec bandwidth.
This page provides a structured comparison with related single-channel SLIC/codec variants, practical application guidance, package information, and purchasing information for engineers evaluating the SI3216-C-FT for single-channel voice interfaces.
کے لیے ڈراپ اِن متبادل SI3216-C-FT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں SI3216-C-FT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature Range, Product Type, Package, RoHS Status, Narrowband Audio Bandwidth.
SI3216-FT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
SI3216-C-FTR
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SI3216-KT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →SI3216-C-FT تفصیلات
| Product Type | Single-channel wideband SLIC/codec |
| Number of Circuits | 1 channel |
| Digital Interfaces | GCI, PCM, and SPI |
| Supply Voltage Range | 3.13 V to 5.25 V |
| سپلائی کرنٹ | 88 mA |
| Power Rating | 700 mW |
| Wideband Audio Bandwidth | Up to 7 kHz |
| Narrowband Audio Bandwidth | Up to 3.4 kHz |
| Sampling Resolution | 16 bit |
| سیمپلنگ ریٹ | 16 kHz |
| DC-DC Converter | BJT/inductor topology |
| آپریٹنگ درجہ حرارت رینج | 0 °C to 70 °C |
| پیکیج | 38-pin TSSOP |
| ماؤنٹنگ ٹائپ | Surface mount |
| Lead-Free Status | Lead free |
| RoHS اسٹیٹس | RoHS compliant |
| Application Category | Telecom line-management and subscriber-line interface |
SI3216-C-FT 38-pin tssop پن کنفیگریشن گائیڈ
SI3216-C-FT (38-pin tssop پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SI3216-C-FT.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
SI3216-C-FT کے لیے موزوں ہے 6 ایپلیکیشنs: Single-Line Voice Gateway, Telephone Line Card, Analog Voice Handset, Subscriber-Line Access Equipment, PCM-Based Voice Adapter, Industrial Voice Communication Terminal.
Single-Line Voice Gateway
The SI3216-C-FT fits a single-line voice gateway that converts one analog subscriber line into a digital voice stream. Its GCI, PCM, and SPI interfaces allow the analog line front end to connect to a host controller through whichever digital architecture best matches the gateway processor. The single-channel arrangement, 88 mA supply current, and 0 °C to 70 °C rating support compact commercial telecom equipment, while wideband operation to 7 kHz can preserve greater voice bandwidth when both endpoints support it.
تجویز کردہ
Telephone Line Card
The SI3216-C-FT can provide the subscriber-line interface for one voice channel on a telephone line card. Its integrated BJT/inductor DC-DC converter supports line-side interface requirements, while GCI, PCM, or SPI connectivity reduces the need for a separate line-interface controller. Wideband operation up to 7 kHz and narrowband operation up to 3.4 kHz allow the same platform to target different voice services, subject to the network and host configuration.
تجویز کردہ
Analog Voice Handset
The SI3216-C-FT is suitable for the single analog voice path in a telephone handset or compact analog endpoint. The 38-pin TSSOP provides a manageable surface-mount footprint, and the selectable GCI, PCM, or SPI host connection supports different embedded-control architectures. Wideband and narrowband voice modes provide flexibility for different network services, while the 3.13 V to 5.25 V supply range accommodates common embedded voltage rails.
تجویز کردہ
Subscriber-Line Access Equipment
The SI3216-C-FT can serve as the analog line-facing section of subscriber-line access equipment. Its single-channel architecture is appropriate for designs requiring one controlled voice endpoint at a time, and its multiple digital interfaces support host-controller integration. The integrated DC-DC converter is important because the line interface must generate the required internal rail while maintaining codec performance. External line protection and magnetic components must be selected using the manufacturer’s recommended network.
تجویز کردہ
PCM-Based Voice Adapter
The SI3216-C-FT works well in a PCM-based voice adapter that accepts digital PCM from a host processor and presents an analog subscriber-line interface. Its PCM connectivity avoids forcing the design through a separate parallel codec interface, while the integrated BJT/inductor converter supplies the required internal operating voltage. The 16-bit, 16 kHz voice format and wideband capability to 7 kHz support modern narrowband or wideband service profiles when configured consistently throughout the signal chain.
تجویز کردہ
Industrial Voice Communication Terminal
The SI3216-C-FT can support an industrial voice terminal designed for controlled indoor environments between 0 °C and 70 °C. A terminal that communicates through an analog line can use the integrated SLIC/codec and one of three digital host interfaces. Its 88 mA specified supply current makes the supply design manageable, while the 38-pin TSSOP package supports compact board construction. Use the manufacturer application circuit to select magnetics, protection, filtering, and decoupling components.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SI3216-C-FT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | SI3216-FT | SI3216-C-FTR | SI3216-KT |
|---|---|---|---|---|
| Brand | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Package | 38-pin TSSOP | 38-pin TSSOP | 38-pin TSSOP | 38-pin TSSOP |
| Number of Circuits | 1 channel | 1 channel | 1 channel | 1 channel |
| Supply Current | 88 mA | 88 mA | 41 mA | 41 mA |
اہم امتیازی خصوصیات
- Three host-facing digital interface options (بمقابلہSI3216-FT)
- Documented wideband and narrowband operating modes (بمقابلہSI3216-KT)
- Established 38-pin TSSOP integration (بمقابلہSI3216-C-FTR)
ڈیزائن نوٹس
Design the low-voltage supply and local decoupling around the full 3.13 V to 5.25 V operating range and the specified 88 mA supply current. Place the required bypass capacitors at the pins identified by the manufacturer application circuit, and use a supply source with adequate transient margin for startup and line-interface transitions. Because the IC includes a BJT/inductor DC-DC converter, verify line-side voltage generation and converter startup behavior with the recommended magnetics rather than relying only on the nominal supply rail.
Keep the SLIC’s analog line paths compact and follow the manufacturer’s grounding topology. The BJT/inductor converter contains a magnetic element, so route its high-current switching paths away from the codec’s sensitive analog inputs and digital clock or data signals. Use a continuous ground reference where the application circuit permits it, minimize loop area in the converter path, and reproduce the manufacturer’s recommended component placement before making independent substitutions.
Do not treat a shared SI3216 family designation as proof of drop-in equivalence. Before substituting SI3216-FT, SI3216-C-FTR, or SI3216-KT, compare all 38 pin assignments, supply limits, enable or control behavior, codec mode, external component values, and timing requirements against the manufacturer datasheets. In particular, the published comparison gives 41 mA for SI3216-C-FTR and SI3216-KT versus 88 mA for SI3216-C-FT, so the host power design must be reevaluated.
Configure the complete voice path for the selected codec mode. Wideband operation reaches 7 kHz, while narrowband operation reaches 3.4 kHz, and the documented format is 16-bit at 16 kHz. Check host sampling clocks, interface timing, and digital signal levels as a complete system. When PCM is selected, confirm frame timing and channel mapping; when SPI or GCI is selected, confirm the corresponding host protocol requirements in the manufacturer datasheet.
تعمیل کی معلومات
Skyworks Solutions product information identifies the SI3216-C-FT as RoHS compliant and lead-free. No automotive qualification, REACH declaration, halogen-free statement, or conflict-minerals statement was identified.