Skyworks Solutions

SI3216-C-FT Single-Channel Wideband SLIC/Codec | Skyworks

N.º da peça: SI3216-C-FT ✓ Ativo
3.13 V to 5.25 V Vdss 88 mA Id 38-pin TSSOP Package
MOQ: 1 |

SI3216-C-FT Visão geral

Skyworks Solutions SI3216-C-FT is a single-channel wideband Subscriber Line Interface Concept and codec with GCI, PCM, and SPI interfaces. It operates from a 3.13 V to 5.25 V supply, consumes 88 mA, and is housed in a 38-pin TSSOP package. The device also includes a BJT/inductor DC-DC converter and supports wideband and narrowband voice operation.

A Subscriber Line Interface Concept, or SLIC, is an integrated analog interface that connects a telecommunications line to digital voice-processing equipment. A SLIC/codec combines functions such as line-driver control, voice-band signal conversion, and digital voice transport. The SI3216-C-FT places these functions into one interface IC for single-channel line-card, voice-gateway, and analog-handset designs, reducing the number of external interface components required.

Key features include dual-mode wideband operation up to 7 kHz and narrowband operation up to 3.4 kHz. Its 16-bit, 16 kHz sampling format supports enhanced voice-processing designs. Digital connectivity through GCI, PCM, and SPI gives the device flexibility for connecting with voice codecs, processors, line-card controllers, and other telecommunications equipment. The operating temperature range is 0 °C to 70 °C, making the part suited to controlled commercial telecom environments.

The SI3216-C-FT integrates a BJT/inductor DC-DC converter to support the line interface and associated voltage-generation requirements. The converter topology is significant because the SLIC must handle a line-side voltage environment while preserving a regulated low-voltage supply for its internal codec and control logic. The manufacturer specifies a maximum power rating of 700 mW, but designers should evaluate actual dissipation from the supply voltage, operating mode, and line conditions rather than treating the rating as continuous dissipation.

Typical uses include telephone line cards, voice gateways, subscriber-line access equipment, and analog handsets. For a new design, the three digital interfaces allow the vendor to select the most appropriate connection to the host processor: GCI for compatible line-interface controllers, PCM for digital PCM streams, or SPI for a compact host-control connection. External component selection and protection must follow the manufacturer’s recommended application circuit.

The most important design consideration is preserving the intended line-side power and signal environment. Keep the SLIC’s sensitive analog paths compact, follow the manufacturer’s grounding and decoupling guidance, and account for the DC-DC converter’s magnetic-component layout. Confirm that the selected magnetics and protection network support the target line voltage, ringing, current, and codec bandwidth.

This page provides a structured comparison with related single-channel SLIC/codec variants, practical application guidance, package information, and purchasing information for engineers evaluating the SI3216-C-FT for single-channel voice interfaces.

Alternativas drop-in para SI3216-C-FT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com SI3216-C-FT (mesmo formato e footprint) — diferindo em Operating Temperature Range, Product Type, Package, RoHS Status, Narrowband Audio Bandwidth.

Silicon Labs
Product Type: Subscriber Line Interface Concept (SLIC) and codec
Narrowband Audio Bandwidth: 3.4 kHz
Comparar com SI3216-C-FT →
Silicon Labs
Operating Temperature Range: -40°C to 85°C
Package: 38-TSSOP, 4.40 mm width
RoHS Status: Compliant
Comparar com SI3216-C-FT →
Silicon Labs
Operating Temperature Range: 0°C to 70°C
Product Type: ProSLIC Subscriber Line Interface Concept and audio codec
RoHS Status: Compliant
Comparar com SI3216-C-FT →

SI3216-FT

✅ Drop-In
Silicon Labs
📦 38-pin TSSOP
Subscriber Line Interface Concept (SLIC) and codec · 1 channel · GCI, PCM, and SPI · 3.13 V to 5.25 V · 88 mA · 700 mW · 0 °C to 70 °C · 16 bit

Consulte o preço

SI3216-C-FTR

✅ Drop-In
📦 38-pin TSSOP
Same SI3216-C family and 38-pin TSSOP architecture; the comparison reports 60 dB gain and 41 mA current versus 88 mA for SI3216-C-FT, a 53% supply-current reduction

📋 Alternativa de referência (fora do catálogo)

SI3216-KT

✅ Drop-In
Silicon Labs
📦 38-pin TSSOP
ProSLIC Subscriber Line Interface Concept and audio codec · 1 · 3.13 V to 5.25 V · 3.3 V or 5 V · 88 mA · 700 mW · 50 Hz to 7.0 kHz · 200 Hz to 3.4 kHz

Consulte o preço

Ver ficha técnica →

SI3216-C-FT Especificações

Product Type Single-channel wideband SLIC/codec
Number of Circuits 1 channel
Digital Interfaces GCI, PCM, and SPI
Supply Voltage Range 3.13 V to 5.25 V
Corrente de alimentação 88 mA
Power Rating 700 mW
Wideband Audio Bandwidth Up to 7 kHz
Narrowband Audio Bandwidth Up to 3.4 kHz
Sampling Resolution 16 bit
Taxa de amostragem 16 kHz
DC-DC Converter BJT/inductor topology
Faixa de temperatura de operação 0 °C to 70 °C
Encapsulamento 38-pin TSSOP
Tipo de montagem Surface mount
Lead-Free Status Lead free
Status RoHS RoHS compliant
Application Category Telecom line-management and subscriber-line interface

Guia de Configuração de Pinos do SI3216-C-FT 38-pin tssop

Configuração de pinos para SI3216-C-FT (pacote 38-pin tssop). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 38-pin tssop para SI3216-C-FT

Nenhum dado detalhado de pinagem disponível para SI3216-C-FT.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SI3216-C-FT é adequado para 6 aplicaçãos: Single-Line Voice Gateway, Telephone Line Card, Analog Voice Handset, Subscriber-Line Access Equipment, PCM-Based Voice Adapter, Industrial Voice Communication Terminal.

🌐

Single-Line Voice Gateway

The SI3216-C-FT fits a single-line voice gateway that converts one analog subscriber line into a digital voice stream. Its GCI, PCM, and SPI interfaces allow the analog line front end to connect to a host controller through whichever digital architecture best matches the gateway processor. The single-channel arrangement, 88 mA supply current, and 0 °C to 70 °C rating support compact commercial telecom equipment, while wideband operation to 7 kHz can preserve greater voice bandwidth when both endpoints support it.

📞

Telephone Line Card

The SI3216-C-FT can provide the subscriber-line interface for one voice channel on a telephone line card. Its integrated BJT/inductor DC-DC converter supports line-side interface requirements, while GCI, PCM, or SPI connectivity reduces the need for a separate line-interface controller. Wideband operation up to 7 kHz and narrowband operation up to 3.4 kHz allow the same platform to target different voice services, subject to the network and host configuration.

📱

Analog Voice Handset

The SI3216-C-FT is suitable for the single analog voice path in a telephone handset or compact analog endpoint. The 38-pin TSSOP provides a manageable surface-mount footprint, and the selectable GCI, PCM, or SPI host connection supports different embedded-control architectures. Wideband and narrowband voice modes provide flexibility for different network services, while the 3.13 V to 5.25 V supply range accommodates common embedded voltage rails.

🏭

Subscriber-Line Access Equipment

The SI3216-C-FT can serve as the analog line-facing section of subscriber-line access equipment. Its single-channel architecture is appropriate for designs requiring one controlled voice endpoint at a time, and its multiple digital interfaces support host-controller integration. The integrated DC-DC converter is important because the line interface must generate the required internal rail while maintaining codec performance. External line protection and magnetic components must be selected using the manufacturer’s recommended network.

🔧

PCM-Based Voice Adapter

The SI3216-C-FT works well in a PCM-based voice adapter that accepts digital PCM from a host processor and presents an analog subscriber-line interface. Its PCM connectivity avoids forcing the design through a separate parallel codec interface, while the integrated BJT/inductor converter supplies the required internal operating voltage. The 16-bit, 16 kHz voice format and wideband capability to 7 kHz support modern narrowband or wideband service profiles when configured consistently throughout the signal chain.

🏭

Industrial Voice Communication Terminal

The SI3216-C-FT can support an industrial voice terminal designed for controlled indoor environments between 0 °C and 70 °C. A terminal that communicates through an analog line can use the integrated SLIC/codec and one of three digital host interfaces. Its 88 mA specified supply current makes the supply design manageable, while the 38-pin TSSOP package supports compact board construction. Use the manufacturer application circuit to select magnetics, protection, filtering, and decoupling components.

What is the SI3216-C-FT?
The SI3216-C-FT is a single-channel wideband Subscriber Line Interface Concept and codec from Skyworks Solutions. According to the manufacturer product information, it combines GCI, PCM, and SPI interfaces with a BJT/inductor DC-DC converter. The device operates from 3.13 V to 5.25 V, is specified for 0 °C to 70 °C, and is packaged in a 38-pin TSSOP for surface-mounted telecommunications equipment.
What are the key specifications of SI3216-C-FT that engineers should know?
The SI3216-C-FT is a single-channel wideband SLIC/codec with an 88 mA supply current and a 3.13 V to 5.25 V operating range. Its voice capabilities include wideband operation to 7 kHz, narrowband operation to 3.4 kHz, and 16-bit sampling at 16 kHz. Skyworks Solutions specifies a 700 mW power rating, a 38-pin TSSOP package, and a 0 °C to 70 °C operating-temperature range.
Which digital interfaces does the SI3216-C-FT support?
The SI3216-C-FT supports GCI, PCM, and SPI digital interfaces. This gives a design team several host-connection options: GCI for a compatible line-interface controller, PCM for direct digital voice-stream connection, or SPI for a compact serial control interface. The selected interface should be matched to the host processor, required voice data rate, board constraints, and system timing requirements before schematic capture.
What voice bandwidth does the SI3216-C-FT support?
The SI3216-C-FT supports dual-mode voice operation with wideband audio extending to 7 kHz and narrowband audio extending to 3.4 kHz. Skyworks Solutions describes 16-bit, 16 kHz sampling for enhanced voice processing. These figures describe the codec signal-processing bandwidth rather than an analog-to-digital resolution of 16 kHz, so the complete interface design must also satisfy the required narrowband or wideband voice profile.
What is the supply voltage of the SI3216-C-FT?
The SI3216-C-FT operates from 3.13 V to 5.25 V and has a specified supply current of 88 mA. The manufacturer also identifies a BJT/inductor DC-DC converter inside the device. Designers should support the full specified range at the IC pins, provide suitable local decoupling, and account for line-side converter behavior rather than sizing the supply from the 3.3 V nominal condition alone.
Where can I download the SI3216-C-FT datasheet PDF?
The SI3216-C-FT datasheet and product information can be reached through the official Skyworks Solutions product entry linked from the component listing. The product is a 38-pin TSSOP single-channel SLIC/codec with GCI, PCM, and SPI interfaces. For design work, use the manufacturer datasheet’s pin-description, application-circuit, magnetic-component, and external-component sections to assign every PCB land and select approved system values.
Where can I find the SI3216-C-FT pinout?
The SI3216-C-FT uses a 38-pin TSSOP package, and its complete pin assignments should be taken from the pin-description table in the manufacturer datasheet. Because the individual pin names and numbering were not included in the available manufacturer listing, no pinout array is reproduced on this page. Use the datasheet when routing power, grounds, digital interfaces, codec signals, and line-interface connections to prevent electrical or PCB footprint errors.
Is the SI3216-C-FT suitable for a voice gateway?
The SI3216-C-FT is suitable for a single-channel voice gateway when the design needs a dedicated analog line interface with digital voice transport. Its GCI, PCM, and SPI options support different controller arrangements, while wideband operation to 7 kHz supports higher-quality voice when the host and line network are designed accordingly. A multi-channel gateway may require multiple devices unless a separate multichannel architecture is selected.
Can the SI3216-C-FT be used in an analog handset design?
Yes, the SI3216-C-FT is suitable for single-channel analog-handset interfaces when its digital control and voice paths match the host processor. The wideband and narrowband codecs provide deployment flexibility, while the integrated BJT/inductor DC-DC converter supports line-related power functions. The handset implementation must still comply with the manufacturer’s recommended external network, protection, magnetic-component, and layout requirements.
What is the difference between SI3216-C-FT and SI3216-FT?
The SI3216-C-FT and SI3216-FT are closely related single-channel 38-pin TSSOP SLIC/codec devices. Cross-reference information identifies both as supporting a 3.3 V or 5 V supply, 88 mA supply current, and 700 mW power rating. The available comparison does not establish every pin-level difference, so engineers should review the manufacturer datasheets before treating either device as a direct replacement.
What is the difference between SI3216-C-FT and SI3216-KT?
SI3216-C-FT and SI3216-KT belong to the SI3216 family and are compared as single-channel telecom interface devices. The available cross-reference identifies SI3216-C-FT as a wideband SLIC/codec with GCI, PCM, and SPI interfaces in a 38-pin TSSOP. Because the comparison does not provide a complete pinout-level or feature-level match, SI3216-KT should be selected only after confirming the relevant electrical and application tables.
When should I choose SI3216-C-FT over another SLIC/codec?
Choose the SI3216-C-FT when a design requires one analog subscriber-line interface, a 3.13 V to 5.25 V supply, and access to GCI, PCM, or SPI connectivity. Its wideband mode reaches 7 kHz and narrowband mode reaches 3.4 kHz, making it appropriate for single-line voice equipment. Select another family member only when a different temperature range, packaging option, interface arrangement, or confirmed pin configuration is needed.
What is the best drop-in replacement for SI3216-C-FT?
SI3216-FT is the closest supported drop-in candidate because it is listed with the same 38-pin TSSOP format, single-channel architecture, 3.3 V or 5 V supply support, 88 mA supply current, and 700 mW power rating. SI3216-C-FTR and SI3216-KT are also related family parts, but the available information does not prove complete pin-for-pin equivalence. Confirm all 38 assignments and operating limits in the manufacturer documentation.
Can SI3216-FT replace SI3216-C-FT on the same PCB?
SI3216-FT is a plausible drop-in candidate for SI3216-C-FT because both are single-channel 38-pin TSSOP SLIC/codec devices with 88 mA supply current and a 700 mW rating. The published comparison also associates both with 3.3 V and 5 V operation. Before substitution, verify every pin, the selected codec mode, external magnetic components, line-side protection, and all timing requirements against both manufacturer datasheets.
Where can I buy SI3216-C-FT online and what is its price?
The SI3216-C-FT can be requested through the “Request a Quote” form on this page for current commercial terms, availability, lead time, and minimum-order information. Current prices are not stated in this answer because they change with quantity, market conditions, and sourcing volume. Use the form to obtain a quotation tied to the exact SI3216-C-FT ordering code and the required package quantity.
Is SI3216-C-FT in stock and what is the lead time?
Current SI3216-C-FT stock status and lead time should be requested through the “Request a Quote” form on this page. The form allows the requested quantity, delivery location, and target schedule to be confirmed against current channel inventory. This avoids presenting a transient stock count or lead-time estimate as a guaranteed manufacturing commitment.
Is the SI3216-C-FT compliant with RoHS and lead-free requirements?
The SI3216-C-FT is identified as lead-free and RoHS compliant in the manufacturer product information. It is a commercial-temperature telecom interface IC with an operating range of 0 °C to 70 °C, so it is not automatically suitable for automotive qualification or extended industrial temperatures. For environmental-material declarations, use the current manufacturer compliance documentation associated with the exact ordering code.

Dados de referência de engenharia para SI3216-C-FT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose SI3216-C-FT for a single-channel subscriber-line interface that needs GCI, PCM, or SPI connectivity and both wideband and narrowband voice operation. It is particularly suitable for line cards, voice gateways, analog handsets, and subscriber-line access equipment operating from 3.13 V to 5.25 V within a 0 °C to 70 °C environment. Choose SI3216-FT only after confirming complete pin-level and timing equivalence with the manufacturer documentation. Consider SI3216-C-FTR when its lower reported 41 mA supply current better fits the power budget, and consider SI3216-KT when its confirmed feature set satisfies the design. All three candidates use the same 38-pin TSSOP format, but package identity alone does not authorize substitution. The deciding factors are interface compatibility, codec mode, current consumption, external component requirements, protection strategy, and lifecycle availability.

Comparação com alternativas

Parâmetro Este produto SI3216-FT SI3216-C-FTR SI3216-KT
Brand Skyworks Solutions Skyworks Solutions Skyworks Solutions Skyworks Solutions
Package 38-pin TSSOP 38-pin TSSOP 38-pin TSSOP 38-pin TSSOP
Number of Circuits 1 channel 1 channel 1 channel 1 channel
Supply Current 88 mA 88 mA 41 mA 41 mA

Principais diferenciais

  • Three host-facing digital interface options (vs SI3216-FT)
  • Documented wideband and narrowband operating modes (vs SI3216-KT)
  • Established 38-pin TSSOP integration (vs SI3216-C-FTR)

Notas de projeto

Design the low-voltage supply and local decoupling around the full 3.13 V to 5.25 V operating range and the specified 88 mA supply current. Place the required bypass capacitors at the pins identified by the manufacturer application circuit, and use a supply source with adequate transient margin for startup and line-interface transitions. Because the IC includes a BJT/inductor DC-DC converter, verify line-side voltage generation and converter startup behavior with the recommended magnetics rather than relying only on the nominal supply rail.

Keep the SLIC’s analog line paths compact and follow the manufacturer’s grounding topology. The BJT/inductor converter contains a magnetic element, so route its high-current switching paths away from the codec’s sensitive analog inputs and digital clock or data signals. Use a continuous ground reference where the application circuit permits it, minimize loop area in the converter path, and reproduce the manufacturer’s recommended component placement before making independent substitutions.

Do not treat a shared SI3216 family designation as proof of drop-in equivalence. Before substituting SI3216-FT, SI3216-C-FTR, or SI3216-KT, compare all 38 pin assignments, supply limits, enable or control behavior, codec mode, external component values, and timing requirements against the manufacturer datasheets. In particular, the published comparison gives 41 mA for SI3216-C-FTR and SI3216-KT versus 88 mA for SI3216-C-FT, so the host power design must be reevaluated.

Configure the complete voice path for the selected codec mode. Wideband operation reaches 7 kHz, while narrowband operation reaches 3.4 kHz, and the documented format is 16-bit at 16 kHz. Check host sampling clocks, interface timing, and digital signal levels as a complete system. When PCM is selected, confirm frame timing and channel mapping; when SPI or GCI is selected, confirm the corresponding host protocol requirements in the manufacturer datasheet.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Yes
Sem halogênios
Unknown
Minerais de conflito
Unknown

Skyworks Solutions product information identifies the SI3216-C-FT as RoHS compliant and lead-free. No automotive qualification, REACH declaration, halogen-free statement, or conflict-minerals statement was identified.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

SI3216-C-FT datasheet SI3216-C-FT pinout SI3216-C-FT datasheet pdf SI3216-C-FT specifications SI3216-C-FT equivalent SI3216-C-FT replacement SI3216-C-FT cross reference SI3216-C-FT vs SI3216-FT SI3216-C-FT price Skyworks SI3216-C-FT SI3216-C-FT 38 pin TSSOP SI3216-C-FT voice gateway

Componentes & termos relacionados

Skyworks Solutions SI3216-C-FT SI3216-FT SI3216-C-FTR SI3216-KT Subscriber Line Interface Concept SLIC SLIC/codec telecom interface IC analog voice interface GCI PCM SPI wideband codec narrowband codec BJT/inductor DC-DC converter 38-pin TSSOP TSSOP package family surface-mount technology voice gateway telephone line card analog handset subscriber-line access equipment 88 mA supply current
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ