SI3216-C-FT Single-Channel Wideband SLIC/Codec | Skyworks
MPN: SI3216-C-FT ✓ Hoạt độngSI3216-C-FT Tóm tắt
A Subscriber Line Interface Concept, or SLIC, is an integrated analog interface that connects a telecommunications line to digital voice-processing equipment. A SLIC/codec combines functions such as line-driver control, voice-band signal conversion, and digital voice transport. The SI3216-C-FT places these functions into one interface IC for single-channel line-card, voice-gateway, and analog-handset designs, reducing the number of external interface components required.
Key features include dual-mode wideband operation up to 7 kHz and narrowband operation up to 3.4 kHz. Its 16-bit, 16 kHz sampling format supports enhanced voice-processing designs. Digital connectivity through GCI, PCM, and SPI gives the device flexibility for connecting with voice codecs, processors, line-card controllers, and other telecommunications equipment. The operating temperature range is 0 °C to 70 °C, making the part suited to controlled commercial telecom environments.
The SI3216-C-FT integrates a BJT/inductor DC-DC converter to support the line interface and associated voltage-generation requirements. The converter topology is significant because the SLIC must handle a line-side voltage environment while preserving a regulated low-voltage supply for its internal codec and control logic. The manufacturer specifies a maximum power rating of 700 mW, but designers should evaluate actual dissipation from the supply voltage, operating mode, and line conditions rather than treating the rating as continuous dissipation.
Typical uses include telephone line cards, voice gateways, subscriber-line access equipment, and analog handsets. For a new design, the three digital interfaces allow the vendor to select the most appropriate connection to the host processor: GCI for compatible line-interface controllers, PCM for digital PCM streams, or SPI for a compact host-control connection. External component selection and protection must follow the manufacturer’s recommended application circuit.
The most important design consideration is preserving the intended line-side power and signal environment. Keep the SLIC’s sensitive analog paths compact, follow the manufacturer’s grounding and decoupling guidance, and account for the DC-DC converter’s magnetic-component layout. Confirm that the selected magnetics and protection network support the target line voltage, ringing, current, and codec bandwidth.
This page provides a structured comparison with related single-channel SLIC/codec variants, practical application guidance, package information, and purchasing information for engineers evaluating the SI3216-C-FT for single-channel voice interfaces.
Bộ thay thế dễ dàng lắp đặt cho SI3216-C-FT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SI3216-C-FT (cùng hình factor và footprint) — khác nhau ở Operating Temperature Range, Product Type, Package, RoHS Status, Narrowband Audio Bandwidth.
SI3216-FT
✅ Drop-InLiên hệ để biết giá
SI3216-C-FTR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SI3216-KT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SI3216-C-FT Thông số kỹ thuật
| Product Type | Single-channel wideband SLIC/codec |
| Number of Circuits | 1 channel |
| Digital Interfaces | GCI, PCM, and SPI |
| Supply Voltage Range | 3.13 V to 5.25 V |
| Điện áp cung cấp | 88 mA |
| Power Rating | 700 mW |
| Wideband Audio Bandwidth | Up to 7 kHz |
| Narrowband Audio Bandwidth | Up to 3.4 kHz |
| Sampling Resolution | 16 bit |
| Tỷ lệ lấy mẫu | 16 kHz |
| DC-DC Converter | BJT/inductor topology |
| Khoảng nhiệt độ hoạt động | 0 °C to 70 °C |
| Hộp | 38-pin TSSOP |
| Kiểu lắp đặt | Surface mount |
| Lead-Free Status | Lead free |
| Trạng thái RoHS | RoHS compliant |
| Application Category | Telecom line-management and subscriber-line interface |
Hướng dẫn cấu hình chân SI3216-C-FT 38-pin tssop
Cấu hình chân cho SI3216-C-FT (38-pin tssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SI3216-C-FT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SI3216-C-FT phù hợp cho 6 Áp dụngs: Single-Line Voice Gateway, Telephone Line Card, Analog Voice Handset, Subscriber-Line Access Equipment, PCM-Based Voice Adapter, Industrial Voice Communication Terminal.
Single-Line Voice Gateway
The SI3216-C-FT fits a single-line voice gateway that converts one analog subscriber line into a digital voice stream. Its GCI, PCM, and SPI interfaces allow the analog line front end to connect to a host controller through whichever digital architecture best matches the gateway processor. The single-channel arrangement, 88 mA supply current, and 0 °C to 70 °C rating support compact commercial telecom equipment, while wideband operation to 7 kHz can preserve greater voice bandwidth when both endpoints support it.
Được đề xuất
Telephone Line Card
The SI3216-C-FT can provide the subscriber-line interface for one voice channel on a telephone line card. Its integrated BJT/inductor DC-DC converter supports line-side interface requirements, while GCI, PCM, or SPI connectivity reduces the need for a separate line-interface controller. Wideband operation up to 7 kHz and narrowband operation up to 3.4 kHz allow the same platform to target different voice services, subject to the network and host configuration.
Được đề xuất
Analog Voice Handset
The SI3216-C-FT is suitable for the single analog voice path in a telephone handset or compact analog endpoint. The 38-pin TSSOP provides a manageable surface-mount footprint, and the selectable GCI, PCM, or SPI host connection supports different embedded-control architectures. Wideband and narrowband voice modes provide flexibility for different network services, while the 3.13 V to 5.25 V supply range accommodates common embedded voltage rails.
Được đề xuất
Subscriber-Line Access Equipment
The SI3216-C-FT can serve as the analog line-facing section of subscriber-line access equipment. Its single-channel architecture is appropriate for designs requiring one controlled voice endpoint at a time, and its multiple digital interfaces support host-controller integration. The integrated DC-DC converter is important because the line interface must generate the required internal rail while maintaining codec performance. External line protection and magnetic components must be selected using the manufacturer’s recommended network.
Được đề xuất
PCM-Based Voice Adapter
The SI3216-C-FT works well in a PCM-based voice adapter that accepts digital PCM from a host processor and presents an analog subscriber-line interface. Its PCM connectivity avoids forcing the design through a separate parallel codec interface, while the integrated BJT/inductor converter supplies the required internal operating voltage. The 16-bit, 16 kHz voice format and wideband capability to 7 kHz support modern narrowband or wideband service profiles when configured consistently throughout the signal chain.
Được đề xuất
Industrial Voice Communication Terminal
The SI3216-C-FT can support an industrial voice terminal designed for controlled indoor environments between 0 °C and 70 °C. A terminal that communicates through an analog line can use the integrated SLIC/codec and one of three digital host interfaces. Its 88 mA specified supply current makes the supply design manageable, while the 38-pin TSSOP package supports compact board construction. Use the manufacturer application circuit to select magnetics, protection, filtering, and decoupling components.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SI3216-C-FT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SI3216-FT | SI3216-C-FTR | SI3216-KT |
|---|---|---|---|---|
| Brand | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Package | 38-pin TSSOP | 38-pin TSSOP | 38-pin TSSOP | 38-pin TSSOP |
| Number of Circuits | 1 channel | 1 channel | 1 channel | 1 channel |
| Supply Current | 88 mA | 88 mA | 41 mA | 41 mA |
Bảo phân biệt quan trọng
- Three host-facing digital interface options (vsSI3216-FT)
- Documented wideband and narrowband operating modes (vsSI3216-KT)
- Established 38-pin TSSOP integration (vsSI3216-C-FTR)
Ghi chú thiết kế
Design the low-voltage supply and local decoupling around the full 3.13 V to 5.25 V operating range and the specified 88 mA supply current. Place the required bypass capacitors at the pins identified by the manufacturer application circuit, and use a supply source with adequate transient margin for startup and line-interface transitions. Because the IC includes a BJT/inductor DC-DC converter, verify line-side voltage generation and converter startup behavior with the recommended magnetics rather than relying only on the nominal supply rail.
Keep the SLIC’s analog line paths compact and follow the manufacturer’s grounding topology. The BJT/inductor converter contains a magnetic element, so route its high-current switching paths away from the codec’s sensitive analog inputs and digital clock or data signals. Use a continuous ground reference where the application circuit permits it, minimize loop area in the converter path, and reproduce the manufacturer’s recommended component placement before making independent substitutions.
Do not treat a shared SI3216 family designation as proof of drop-in equivalence. Before substituting SI3216-FT, SI3216-C-FTR, or SI3216-KT, compare all 38 pin assignments, supply limits, enable or control behavior, codec mode, external component values, and timing requirements against the manufacturer datasheets. In particular, the published comparison gives 41 mA for SI3216-C-FTR and SI3216-KT versus 88 mA for SI3216-C-FT, so the host power design must be reevaluated.
Configure the complete voice path for the selected codec mode. Wideband operation reaches 7 kHz, while narrowband operation reaches 3.4 kHz, and the documented format is 16-bit at 16 kHz. Check host sampling clocks, interface timing, and digital signal levels as a complete system. When PCM is selected, confirm frame timing and channel mapping; when SPI or GCI is selected, confirm the corresponding host protocol requirements in the manufacturer datasheet.
Thông tin tuân thủ
Skyworks Solutions product information identifies the SI3216-C-FT as RoHS compliant and lead-free. No automotive qualification, REACH declaration, halogen-free statement, or conflict-minerals statement was identified.