SN74LS244N - Octal 3-State Buffer | Texas Instruments
MPN: SN74LS244N ✓ فعالSN74LS244N جائزہ
A logic buffer is a digital IC that reproduces a binary input signal at its output while providing buffering, drive strength, or controlled isolation between circuit sections. The SN74LS244N belongs to the 74LS low-power Schottky TTL family and is categorized as a non-inverting buffer or line driver. Its role in a larger logic hierarchy is to drive memory, clock, data, and other bus-oriented signals while placing each output into a high-impedance state when it is not selected.
The principal feature of the SN74LS244N is its combination of eight non-inverting channels and independently controlled 3-state outputs. A 5 V supply keeps the device compatible with conventional LS-TTL systems, while the two four-bit output groups support structured bus arrangements. The active-low output controls provide a straightforward way to isolate a driver during bus turnaround, address multiplexing, test, or shared-bus operation.
This device uses bipolar Schottky-clamped TTL technology. Its non-inverting buffers preserve input logic polarity, and the 3-state outputs offer a third electrical state in addition to high and low levels. That high-impedance state is essential when another circuit block must drive the same interconnect. Because the device is intended for 4.75 V to 5.25 V operation, system designers should account for the supply tolerance of older LS-TTL logic and the resulting margin at the ends of the voltage range.
Typical uses include driving address and data lines into dynamic memory, clock distribution within 5 V digital systems, bus buffering, and interfacing between modules that need controlled output isolation. The SN74LS244N is particularly useful where multiple buffered outputs must be released independently rather than disabled as one complete eight-channel group.
For reliable board-level implementation, connect each data input to its corresponding non-inverting output and use the active-low output-control pins to manage bus ownership. Keep unused inputs tied to a defined logic level and route supply and ground connections to provide adequate return paths. A complete pin assignment should be taken directly from the manufacturer pin-description table before laying out the PCB or wiring the device into legacy equipment.
This product record combines the manufacturer device description, distributor package information, cross-reference results, practical bus-design guidance, and a like-for-like comparison framework. It is intended to help engineers identify the correct 20-pin DIP replacement, distinguish electrically related logic families, and plan output-enable sequencing before committing a schematic or PCB change.
کے لیے ڈراپ اِن متبادل SN74LS244N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں SN74LS244N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Logic Family, Package.
SN74S244N
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SN74HCT244N
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SN74ACT244N
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SN74AHCT244N
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DM74LS244N
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SN74LS244N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Octal non-inverting buffer and line driver |
| Logic Family | 74LS low-power Schottky TTL |
| Number of Channels | 8 channels |
| Channel Organization | 2 elements × 4 bits |
| Output Polarity | Non-inverting |
| Output State | 3-state, high-impedance |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Output Control | Active low |
| Logic Family Technology | Bipolar Schottky TTL |
| پیکیج | 20-pin DIP |
| ماؤنٹنگ ٹائپ | Through-hole |
SN74LS244N 20-pin dip پن کنفیگریشن گائیڈ
SN74LS244N (20-pin dip پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SN74LS244N.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
SN74LS244N کے لیے موزوں ہے 6 ایپلیکیشنs: Memory Address and Data Bus Buffering, Clock Distribution, Bidirectional Bus Interface Support, Legacy Computer and Test Equipment Repair, Industrial Control Module Isolation, Educational and Digital Logic Prototyping.
Memory Address and Data Bus Buffering
The SN74LS244N is suitable for buffering address or data lines in a 5 V LS-TTL system because it provides eight non-inverting channels and independent 3-state control. The device can place selected outputs in a high-impedance state during memory-bank selection, preventing two memory drivers from fighting over the same bus. Its 4.75 V to 5.25 V operating range matches the stated system supply. When planning the logic, verify propagation delay and output-current limits against the memory and backplane loading before treating the buffer as a complete timing solution.
تجویز کردہ
Clock Distribution
The SN74LS244N can distribute a clock to several destinations while giving each output an active-low enable control. This allows selected clock loads to be connected or isolated during reset, test, or operating-mode changes. Its eight non-inverting channels are useful where a shared source must feed parallel counters, flip-flops, or memory-control logic in a 4.75 V to 5.25 V environment. Because clock networks are timing-sensitive, calculate cumulative buffer delay and check edge requirements against the slowest receiving device rather than relying only on nominal functional equivalence.
تجویز کردہ
Bidirectional Bus Interface Support
The SN74LS244N fits systems that need controlled isolation around shared data paths, particularly when two independently enabled buffer banks feed a common bus. The 3-state output allows each channel to stop driving logically, while the non-inverting arrangement preserves data polarity from source to destination. Its 20-pin DIP package also supports repair and modernization of older 5 V computer, test, and industrial-control assemblies. Correct ownership logic is essential: only one driver group should be enabled at a time, and all unused inputs must remain in a defined state.
تجویز کردہ
Legacy Computer and Test Equipment Repair
The SN74LS244N is a practical replacement candidate in legacy 5 V equipment that used an octal non-inverting 3-state buffer in a 20-pin DIP socket. Repairing a historical computer, peripheral, or instrumentation assembly often requires retaining the original logic-family timing instead of introducing a modern low-voltage device. The SN74LS244N provides the expected 74LS function and 4.75 V to 5.25 V supply operation. Before installation, compare every pin name and confirm that the replacement is not a surface-mount ordering code.
تجویز کردہ
Industrial Control Module Isolation
The SN74LS244N can isolate logic outputs on an industrial control module by placing inactive channels in the high-impedance state. This is useful where a processor, programmable controller, or test fixture drives cards through shared connectors and must avoid contention during mode changes. The two four-bit groups provide structured control for paired buses, while active-low enables support straightforward control logic. The 4.75 V to 5.25 V range suits 5 V control electronics, but designers must include grounding, decoupling, and signal-integrity practices appropriate to the longer wiring paths commonly found in industrial systems.
تجویز کردہ
Educational and Digital Logic Prototyping
The SN74LS244N supports classroom and prototype demonstrations of tristate logic, bus contention, output enable control, and non-inverting signal conditioning. Its 20-pin DIP package is easy to install on a solderless breadboard or socketed trainer board, while eight channels make bus behavior visible across multiple loads. The 5 V supply range aligns with conventional TTL teaching systems. Because incorrect output-enable sequencing can cause contention or undefined voltage, prototype each driver group separately and demonstrate the high-impedance state before connecting multiple external loads.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SN74LS244N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | SN74S244N | SN74HCT244N | SN74ACT244N | SN74AHCT244N | DM74LS244N |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | onsemi |
| Package | 20-pin DIP | 20-pin DIP | 20-pin DIP | 20-pin DIP | 20-pin DIP | 20-pin DIP |
| Function | Octal non-inverting 3-state buffer | Octal non-inverting 3-state buffer | Octal non-inverting 3-state buffer | Octal non-inverting 3-state buffer | Octal non-inverting 3-state buffer | Octal non-inverting 3-state buffer |
| Channel Count | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Output Polarity | Non-inverting | Non-inverting | Non-inverting | Non-inverting | Non-inverting | Non-inverting |
| Logic Technology | Bipolar Schottky TTL | Bipolar Schottky TTL | CMOS with TTL-compatible inputs | Advanced CMOS | Advanced CMOS with TTL-compatible inputs | Bipolar Schottky TTL |
| Nominal Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Output Enable | Active low | Active low | Active low | Active low | Active low | Active low |
| Mounting Style | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
| Primary Selection Trade-Off | Original 74LS timing and electrical behavior | Related Schottky TTL family behavior | TTL-compatible CMOS input behavior | Advanced CMOS speed and power behavior | Advanced CMOS with TTL-compatible inputs | Second-source 74LS behavior |
اہم امتیازی خصوصیات
- Retains the established bipolar 74LS operating characteristic (بمقابلہSN74HCT244N)
- Second-source option retains the same logic family and package (بمقابلہDM74LS244N)
- Two independently controlled four-bit groups (بمقابلہSN74S244N)
ڈیزائن نوٹس
Do not allow two enabled outputs to drive the same bus line at the same time. The SN74LS244N can place outputs in a high-impedance state, but incorrect output-enable sequencing can still create contention, excessive current, and undefined voltage levels. Define the ownership of each four-bit group in the system logic and provide non-overlapping enable timing before connecting two driver sources to one interconnect.
Use the manufacturer pin-description table to assign every data input, output, ground, supply, and output-control connection before routing the 20-pin DIP. In a new layout, place the device near the protected bus, maintain short ground-return paths, and keep switching or high-current traces physically separate from buffer outputs. For a replacement board, follow the original component outline and socket orientation rather than relying on the logical function alone.
Account for propagation delay, input transition-time limits, capacitive loading, and the number of attached receivers when using the SN74LS244N as a bus driver. The 3-state output reduces contention when correctly disabled, but it does not eliminate trace impedance, ringing, or timing skew. For longer or faster interconnects, use controlled topology, appropriate termination, and measurement-based timing checks instead of assuming buffer functionality alone guarantees signal integrity.
Operate the SN74LS244N within its stated 4.75 V to 5.25 V supply range and verify the complete system’s voltage tolerance at the device pins. Provide a low-impedance supply and ground connection, particularly when several outputs are switching simultaneously. Because the package is a through-hole 20-pin DIP intended for conventional 5 V logic, do not substitute a low-voltage modern part without separately checking input thresholds, timing, and supply limits.
تعمیل کی معلومات
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is stated in the product information. General-purpose logic status does not establish automotive qualification.