SN75112N - Dual 2/0 Line Driver | Texas Instruments
MPN: SN75112N ✓ فعالSN75112N جائزہ
A line driver is an interface IC that converts logic-level input signals into stronger, differential outputs suitable for driving balanced cables or bus links. Within the interface-IC hierarchy, a dual line driver occupies the transmitter side of a communications interface. It accepts TTL-compatible control signals and uses two output channels to support applications such as V.35 data-interchange circuits when paired with an appropriate receiver and external components.
Key benefits include improved stability over supply-voltage and temperature ranges, constant-current outputs, high operating speed, standard supply voltages, and high output impedance. The high output impedance helps limit loading of the driven line, while the constant-current behavior improves control of output current as voltage and temperature change. An inhibitor input is available for driver shutdown control.
The SN75112 family is specifically referenced by Texas Instruments for implementing V.35 data-interchange circuits with the SN75107A dual line receiver and suitable external resistors. Its two independent channels can also support general-purpose balanced signaling, clock distribution, test equipment, industrial control links, and legacy communications interfaces where TTL inputs and differential outputs are required.
Designers should verify the exact supply-voltage limits, output-current limits, propagation delays, input thresholds, and operating-temperature range against the manufacturer datasheet before finalizing a circuit. PCB layout should keep each driver channel's output path compact, provide a common return reference, and avoid routing sensitive differential signals beside unrelated high-current switching nodes.
This page combines manufacturer product information, interface and package details, application guidance, and drop-in replacement findings. It also provides actionable design notes and a specification-oriented comparison framework for engineers evaluating SN75112N in new and legacy interface designs.
کے لیے ڈراپ اِن متبادل SN75112N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
SN75112NE4
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SN75110AN
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SN75110N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SN55110N
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SN75112N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Dual differential line driver |
| Number of Drivers | 2 |
| آؤٹ پٹ کنفیگریشن | Differential |
| پیکیج | 14-pin PDIP |
| ماؤنٹنگ ٹائپ | Through-hole |
| Output Current Behavior | Constant-current outputs |
| Input Compatibility | TTL-compatible |
| Common-Mode Output Voltage Range | -3 V to 10 V |
| Output Impedance | High |
| Shutdown Control | Inhibitor available for driver shutdown |
SN75112N 14-pin pdip پن کنفیگریشن گائیڈ
SN75112N (14-pin pdip پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SN75112N.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
SN75112N کے لیے موزوں ہے 6 ایپلیکیشنs: V.35 Data-Interchange Interface, Balanced Digital Data Links, Legacy Communications Equipment, Industrial Control Signal Transmission, Test and Measurement Interfaces, Clock and Differential Signal Distribution.
V.35 Data-Interchange Interface
The SN75112N is specifically suited to the transmitter side of a V.35 data-interchange circuit when paired with an SN75107A dual line receiver and suitable external resistors. Its two differential driver channels can carry the paired data signals required by the interface, while TTL-compatible inputs make it practical to drive from conventional logic. The manufacturer specifically identifies this receiver-driver combination for V.35 implementations. Before routing the board, verify supply voltage, output current, timing, and external termination values against the SN75112 datasheet, Rev. G, because the line impedance and cable length determine the appropriate network.
تجویز کردہ
Balanced Digital Data Links
The SN75112N can transmit two balanced digital channels through its differential outputs, providing constant-current behavior and high output impedance for line-driving requirements. These characteristics are useful when a legacy communications subsystem must drive twisted-pair or other balanced interconnects from TTL-level logic. Engineers should use the manufacturer's common-mode output range of -3 V to 10 V as an initial design boundary, while confirming common-mode limits, rise and fall times, and propagation delay for the actual cable, load, and supply configuration.
تجویز کردہ
Legacy Communications Equipment
The SN75112N fits repair, expansion, and preservation designs involving older modem, terminal, and data-communications hardware that expects TTL-compatible inputs and differential line outputs. Its two channels reduce the number of driver packages required when a board must transmit two related signals. The 14-pin PDIP package is useful for through-hole repair and prototyping, but it occupies more board area than a modern surface-mount transceiver. Confirm connector pinout, signal polarity, termination, and grounding before replacing an existing transmitter to avoid damaging a legacy interface.
تجویز کردہ
Industrial Control Signal Transmission
SN75112N can provide differential signal drive for industrial control and instrumentation subsystems that need to couple logic signals to external equipment over balanced wiring. Constant-current outputs improve output-current regulation as supply voltage and temperature change, while high output impedance reduces unwanted loading. The device's -3 V to 10 V common-mode output range can support many legacy signal environments, but the complete operating-temperature range and supply limits must be checked before installation. Isolation, surge protection, grounding, and cable-length requirements remain system-level design decisions.
تجویز کردہ
Test and Measurement Interfaces
The two high-speed differential channels of SN75112N are useful in test and measurement equipment that must translate TTL-compatible control signals into balanced outputs for remote fixtures or instrument interfaces. The family is explicitly associated with stable operation over supply-voltage and temperature ranges, which helps repeated bench operation remain predictable. For instrumentation, evaluate noise, timing margin, output loading, and connector return paths rather than assuming that differential signaling alone guarantees accuracy. A controlled ground reference and short, symmetric routing help preserve signal integrity.
تجویز کردہ
Clock and Differential Signal Distribution
Although primarily a data-communications line driver, SN75112N can distribute two related clock or control signals over balanced connections in legacy equipment. TTL-compatible inputs simplify coupling from digital logic, and the independent differential outputs permit a compact through-hole implementation. Timing margin must be calculated from the datasheet propagation delay, output transition behavior, receiver threshold, and the loss introduced by the cable and termination. Verify that the signal frequency and loaded-line conditions remain inside the device's specified operating limits before treating this generic line driver as a precision clock source.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SN75112N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
Do not select it merely because another line-driver IC uses a similar package; verify the complete pinout, supply range, timing, current ratings, and inhibitor polarity. Do not substitute an MC1489-family receiver for the SN75112, because transmitter and receiver channels serve opposite sides of the link. No additional drop-in alternative is established by the available cross-reference information. If a smaller surface-mount package, higher speed, wider temperature range, or modern differential standard is required, evaluate a current interface family rather than treating this legacy dual line driver as a universal replacement.
ڈیزائن نوٹس
Route each differential output pair as a short, symmetric pair to its connector or receiver, with a continuous ground reference. Keep the two channel paths similarly routed so propagation-delay and radiation remain balanced. The SN75112 is a through-hole legacy-interface device, so use short stubs and clean ground connections to reduce reflections and common-mode conversion.
Decouple the device close to its supply and ground pins with the capacitance and placement recommended in the manufacturer datasheet. Because the SN75112's output current is specified as constant-current behavior, do not interpret that phrase as permission to exceed the maximum output-current rating. Confirm supply range, output-current limits, and power dissipation under worst-case load and temperature conditions before production release.
Do not substitute the SN75112 transmitter directly for an MC1489 receiver or treat a related ordering code as interchangeable without checking the pinout. The SN75112 is intended for use with an SN75107A receiver in the manufacturer-described V.35 circuit. Preserve input polarity, output polarity, termination values, and inhibitor logic when replacing an existing implementation to avoid damaging downstream equipment.
تعمیل کی معلومات
Compliance and automotive-qualification statements are not identified in the manufacturer product summary. Confirm the status for the exact SN75112N ordering code with Texas Instruments.