STMicroelectronics

STM32L011G3U6 - 32MHz Cortex-M0+ MCU | STMicroelectronics

MPN: STM32L011G3U6 ✓ فعال
1.8 V, 2.5 V or 3.3 V Vdss 28-UFQFPN, 4 x 4 mm Package 32 MHz Speed 8 KB Memory
MOQ: 1 |

STM32L011G3U6 جائزہ

The STMicroelectronics STM32L011G3U6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ core, a 32 MHz maximum clock and 8 KB of Flash memory in a 28-pin UFQFPN package. The device supports 1.8 V, 2.5 V and 3.3 V supply configurations, making it suitable for compact, battery-operated and low-power embedded systems.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, peripherals and communication interfaces on one device. The STM32L0 access-line family combines a compact Arm Cortex-M0+ processor with energy-focused design, providing a platform for control, sensing, communication and data acquisition without requiring a separate processor and external memory.

The STM32L011G3U6 includes an Arm Cortex-M0+ RISC core, 8 KB Flash and 32 MHz processing capability. Its 28-UFQFPN 4 x 4 mm package supports compact PCB layouts, while the supported 1.8 V, 2.5 V and 3.3 V operating levels accommodate both low-voltage energy-harvesting systems and conventional 3.3 V electronics. The manufacturer describes the STM32L011x3/x4 family as an ultra-low-power access-line platform.

The device is organized around the Arm Cortex-M0+ architecture, a 32-bit RISC instruction set designed for efficient embedded control. Flash memory retains programmed firmware when power is removed, allowing autonomous operation after reset. The manufacturer product page identifies reset and supply-management functions as part of the family architecture, supporting compact systems that need controlled startup behavior and predictable power management.

Typical uses include battery-powered sensor nodes, compact industrial control modules, low-power IoT endpoints, wearable accessories, metering equipment and embedded instruments. The small package is particularly useful where board area is constrained but a general-purpose 32-bit control platform is required. Designers should select the appropriate external clock, decoupling and programming connections according to the manufacturer's pin and application guidance.

A key design consideration is the balance between processing capability, low-power operation and board density. The 8 KB Flash capacity should be checked against the final firmware image, including bootloader, application code and configuration data. The 32 MHz maximum CPU frequency also requires attention to clock configuration, peripheral timing and power-management settings during firmware development.

This product reference combines the device's principal architecture, memory, package and supply information with practical design guidance, sourcing questions, and a clear comparison against related STMicrocontrollers. It is intended to help engineers evaluate fit, plan firmware and hardware integration, and determine whether the STM32L011G3U6 belongs in an ultra-low-power embedded design.

کے لیے ڈراپ اِن متبادل STM32L011G3U6 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

STM32L011G3U6 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M0+
Instruction Set 32-bit RISC
Maximum CPU Frequency 32 MHz
Flash Memory 8 KB
Flash Organization 8K x 8 bits
Supported Supply Voltage 1.8 V, 2.5 V or 3.3 V
پیکیج 28-UFQFPN, 4 x 4 mm
پن کی تعداد 28 pins
ماؤنٹنگ ٹائپ Surface mount
Delivery Format Tray
Series STM32L0
Family STM32L011x3/x4 access line
Core Architecture Arm Cortex-M0+ RISC
Reset and Supply Management Supported

STM32L011G3U6 28-ufqfpn, 4 x 4 mm پن کنفیگریشن گائیڈ

STM32L011G3U6 (28-ufqfpn, 4 x 4 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

STM32L011G3U6 کے لیے 28-ufqfpn, 4 x 4 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM32L011G3U6.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

STM32L011G3U6 کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Sensor Node, Compact Industrial Control Module, Low-Power IoT Endpoint, Portable Metering Instrument, Wearable Accessory Controller, Embedded Test and Measurement Instrument.

🧩

Battery-Powered Sensor Node

The STM32L011G3U6 fits a compact sensor node because its Arm Cortex-M0+ core provides 32-bit control at up to 32 MHz while the device belongs to an ultra-low-power STM32L0 access-line family. The 8 KB Flash is suitable for small acquisition, thresholding and communication-control firmware, provided the final image fits with margin. Its 28-UFQFPN 4 x 4 mm package reduces board area, and support for 1.8 V, 2.5 V and 3.3 V supplies permits integration with low-voltage sensors. For battery life, configure the MCU's sleep modes, peripheral clocks and wake sources carefully and measure the complete operating profile rather than relying on CPU frequency alone.

🏭

Compact Industrial Control Module

STM32L011G3U6 is appropriate for compact industrial controls that need deterministic embedded processing without a large processor footprint. Its Cortex-M0+ RISC core operates up to 32 MHz, while the 28-UFQFPN package leaves board perimeter available for connectors and protection components. The device's 1.8 V, 2.5 V and 3.3 V operating choices support multiple industrial interface arrangements. Engineers should verify every required peripheral, I/O count and timing function against the manufacturer pin table. Firmware should include appropriate fault handling and watchdog strategy, while PCB design should isolate switching nodes and provide stable decoupling close to the device.

🌐

Low-Power IoT Endpoint

The STM32L011G3U6 can form the control core of a low-power IoT endpoint when the application fits within 8 KB of Flash and uses a small number of external interfaces. The 32 MHz Cortex-M0+ core can execute protocol framing, sensor management and local state handling, while the 4 x 4 mm 28-pin package supports dense terminal-board layouts. Selection should account for radio-control signals, antenna interfaces and any buffering that cannot be integrated into the MCU. Low-power performance depends on the selected system architecture, including sleep duration, wake-up frequency and radio current, so evaluate the complete product duty cycle with representative peripheral loads.

📱

Portable Metering Instrument

STM32L011G3U6 suits portable metering equipment where low power, compact packaging and local control are important. The device's 8 KB Flash can hold a focused firmware image for measurement sequencing, calibration handling and data output, while its Cortex-M0+ architecture provides a 32-bit processing platform at up to 32 MHz. Its supply-voltage options allow design flexibility around sensor and display circuitry. For accurate measurement, use the manufacturer guidance for analog-capable pins, reference routing and grounding. Keep sensitive analog paths away from fast digital return currents and verify the selected operating voltage against all peripheral and I/O limits before schematic release.

📱

Wearable Accessory Controller

The STM32L011G3U6 is a logical controller for a small wearable accessory because its 28-UFQFPN 4 x 4 mm package occupies little board area and its STM32L0 family emphasizes ultra-low-power operation. The 32 MHz Cortex-M0+ core is appropriate for gesture logic, sensor coordination and communication sequencing, provided the application remains within the 8 KB Flash constraint. Low-voltage operation at 1.8 V, 2.5 V or 3.3 V can simplify integration with compact battery and sensor systems. Mechanical and thermal design remain critical: keep the MCU away from heat-generating components, minimize exposed area where needed, and confirm package details against the manufacturer drawing.

🔧

Embedded Test and Measurement Instrument

STM32L011G3U6 can be used in small test and measurement instruments when the required firmware, interface count and memory fit its 8 KB Flash limit. The 32 MHz Cortex-M0+ RISC core supports control sequencing, configuration handling and data formatting, while the compact 28-pin UFQFPN package preserves space for analog, power and connector sections. The device supports 1.8 V, 2.5 V and 3.3 V configurations, enabling tailored rail selection. Use the manufacturer pin descriptions to choose appropriate signal types, and follow the application guidance for decoupling and clock configuration. A higher-memory STM32 family may be preferable if data logging, complex UI control or extensive protocol stacks exceed the available Flash.

What is the STM32L011G3U6?
The STM32L011G3U6 is an ultra-low-power STMicroelectronics microcontroller built around the 32-bit Arm Cortex-M0+ RISC core. It operates at up to 32 MHz, contains 8 KB of Flash memory and is packaged in a compact 28-pin UFQFPN measuring 4 x 4 mm. The STMicroelectronics product page identifies it as part of the STM32L011x3/x4 access-line family.
What are the key specifications of STM32L011G3U6 that engineers should know?
The principal STM32L011G3U6 specifications are a 32-bit Arm Cortex-M0+ core, a maximum operating frequency of 32 MHz and 8 KB of Flash organized as 8K x 8 bits. The device is offered in a 28-UFQFPN 4 x 4 mm package and supports 1.8 V, 2.5 V and 3.3 V supply configurations. These parameters position it as a compact, low-power control MCU for embedded products.
What is the operating voltage of STM32L011G3U6?
The STM32L011G3U6 supports 1.8 V, 2.5 V and 3.3 V operating configurations, according to the manufacturer datasheet information for this exact orderable device. This voltage range allows the same MCU family to be used in energy-conscious low-voltage designs as well as conventional 3.3 V systems. Confirm the detailed electrical limits and decoupling requirements in the manufacturer datasheet before finalizing the power architecture.
Where can I download the STM32L011G3U6 datasheet PDF?
The STM32L011G3U6 datasheet and supporting technical documentation are available through the official STMicroelectronics STM32L011G3 product page at https://www.st.com/en/microcontrollers-microprocessors/stm32l011g3.html. The manufacturer page links to the device documentation and describes the STM32L011x3/x4 family's Cortex-M0+ core, reset and supply-management features. Use the manufacturer documentation as the authority for pin assignments, electrical limits and programming procedures.
Where can I find the STM32L011G3U6 pinout?
The STM32L011G3U6 pinout is identified as a 28-pin UFQFPN package and can be located in the pin description and package diagrams contained in the official STMicroelectronics documentation. Use the pin-description table when assigning tracks, connecting programming signals and selecting decoupling networks. The device listing confirms the package, while the manufacturer datasheet remains the authoritative source for every pin name and function.
What is the best drop-in replacement for STM32L011G3U6?
No verified 28-pin, pin-to-pin drop-in replacement for the STM32L011G3U6 is identified on the STM32 product page. A replacement should match the 28-UFQFPN footprint, 8 KB Flash requirement, supported voltage range, Arm Cortex-M0+ software expectations and essential peripheral assignments. Same-family devices with different pin counts or memory sizes are not drop-in replacements, and STM32 firmware should be revalidated before changing MCU suppliers.
Can STM32G0C1KEU6N replace STM32L011G3U6?
STM32G0C1KEU6N is a related STMicroelectronics Cortex-M0+ MCU, but it is not established as a drop-in replacement for STM32L011G3U6. The comparison record identifies both devices as active STMicroelectronics microcontrollers, yet package dimensions, pin assignments, memory capacity and peripheral details must be checked before substitution. Treat it as a design-comparison candidate rather than a PCB-compatible replacement.
STM32L011G3U6 vs STM32G0C1KEU6N — which is better for a low-power design?
STM32L011G3U6 is the stronger match when an existing design specifically requires its 28-UFQFPN 4 x 4 mm footprint, 8 KB Flash organization and STM32L011 access-line implementation. STM32G0C1KEU6N belongs to the newer STM32G0 family and may be evaluated for different memory, peripheral or qualification requirements. The correct choice depends on confirmed electrical, package, firmware and lifecycle criteria rather than processor name alone.
When should I choose STM32L011G3U6 instead of another STM32 microcontroller?
Choose STM32L011G3U6 when the design requires an ultra-low-power Arm Cortex-M0+ MCU with a 32 MHz maximum clock, 8 KB Flash and a compact 28-UFQFPN footprint. It is particularly suitable for small sensor nodes and embedded instruments where 8 KB is sufficient for the application. Select another family member when the board needs more memory, additional pins, a different package or peripherals not present in this device.
Is STM32L011G3U6 suitable for a battery-powered IoT sensor node?
The STM32L011G3U6 is suitable for a battery-powered IoT sensor node when its 8 KB Flash capacity and low-power feature set satisfy the firmware requirements. Its Arm Cortex-M0+ core runs at up to 32 MHz, and the 28-pin 4 x 4 mm package supports compact boards. Power consumption must be evaluated in the final sleep, wake, analog and communication configuration rather than inferred from the maximum CPU frequency alone.
Where can I buy STM32L011G3U6 online?
Use the Request a Quote form on this page to ask for STM32L011G3U6 availability, current commercial terms and delivery information. A distributor listing confirms that the exact 28-UFQFPN orderable part is commercially offered, but inventory and lead time can change independently of technical specifications. Submit the required quantity and target package format with your quote request.
What is the price of STM32L011G3U6?
The current commercial price for STM32L011G3U6 is not reproduced as static text because market pricing and availability change frequently. Use the Request a Quote form on this page to request current pricing for the exact 28-UFQFPN MPN and your required quantity. The form is the appropriate channel for a firm quotation, quantity-break review and lead-time confirmation.
What is the lead time and stock status of STM32L011G3U6?
Request the current stock position, minimum order quantity and lead time through the Request a Quote form on this page. The device is offered in tray packaging, but availability can vary by region, quantity and production scheduling. Do not infer delivery from a distributor search result; request a dated commitment for the exact STM32L011G3U6 order code and shipment quantity.
What can replace STM32L011G3U6?
A direct replacement for STM32L011G3U6 must use the same 28-UFQFPN footprint and provide compatible pin assignments, 1.8 V, 2.5 V or 3.3 V operation, adequate Flash memory and equivalent required peripherals. No fully verified cross-manufacturer, pin-to-pin replacement is established in the available documentation. The most defensible option is to review closely related STM32 devices and repeat board-level and firmware qualification.
Is STM32L011G3U6 the same as STM32G0C1KEU6N?
No, STM32L011G3U6 and STM32G0C1KEU6N are not the same orderable device. The first belongs to the STM32L011x3/x4 access-line family, uses an 8 KB Flash configuration and is specified in a 28-UFQFPN package. STM32G0C1KEU6N belongs to STM32G0 and must be evaluated independently for package, memory, peripherals and software compatibility.
Is STM32L011G3U6 RoHS compliant and automotive qualified?
The RoHS, REACH and automotive-qualification status of STM32L011G3U6 must be confirmed from the manufacturer product documentation and regional compliance declarations before release to production. AEC-Q100 qualification should not be assumed merely because the device uses an Arm Cortex-M0+ core. For an automotive design, select a part for which STMicroelectronics explicitly states the required qualification and grade.

کے لیے انجینئرنگ ریفرنس ڈیٹا STM32L011G3U6 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the STM32L011G3U6 when the application needs an ultra-low-power 32-bit control MCU, a maximum clock of 32 MHz and an 8 KB Flash budget within a compact 28-UFQFPN footprint. It is a strong match for sensor nodes, portable instruments and small embedded-control products operating at 1.8 V, 2.5 V or 3.3 V. Consider STM32G0C1KEU6N when evaluating a newer STM32G0 design, but verify its package, memory and peripheral configuration because it is not established as a drop-in replacement. STM32G474CET6 may suit applications requiring a different, more capable STM32 family rather than the lowest-complexity ultra-low-power configuration. If firmware exceeds 8 KB or required signals exceed the available pinout, move to a higher-memory or higher-pin-count STM32 device instead of forcing a board change later.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ STM32G0C1KEU6N STM32G474CET6
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Series STM32L0 STM32G0 STM32G4
Pin-to-Pin Compatibility Reference footprint Not established as drop-in Not established as drop-in

اہم امتیازی خصوصیات

  • Compact STM32L0 access-line implementation (بمقابلہSTM32G0C1KEU6N)
  • Low-voltage supply flexibility (بمقابلہSTM32G474CET6)
  • Dedicated 32-bit control platform (بمقابلہATTINY13A-SUR)

ڈیزائن نوٹس

Choose the supply rail and operating mode from the manufacturer's electrical limits before laying out the power network. The STM32L011G3U6 supports 1.8 V, 2.5 V and 3.3 V configurations, but the selected voltage also constrains I/O behavior, clocking and peripheral use. Place the required bulk and high-frequency decoupling capacitors close to their associated pins, keep the return path short and verify startup behavior for the complete rail arrangement.

Use the manufacturer package drawing and land pattern rather than a generic square-QFN footprint. The 28-UFQFPN is only 4 x 4 mm, so small routing errors can move a trace beneath the exposed thermal area or interfere with adjacent pads. Confirm pin-one orientation, pad dimensions, solder-mask clearance and the exposed-pad connection against the official package drawing before releasing artwork.

The 8 KB Flash limit is the most immediate design constraint. Budget space for startup code, peripheral drivers, communication handlers, calibration data and future fixes rather than sizing the design from application code alone. Also verify the number and electrical type of required I/O pins, since a firmware-compatible MCU in a different package cannot be substituted without a PCB redesign.

Validate battery life using the complete duty cycle, including sensor conversion, communications, processing and sleep periods. A 32 MHz maximum CPU frequency describes performance capability, not continuous power consumption. Use the manufacturer's clock-tree, sleep-mode and peripheral-control guidance to prevent unused blocks from remaining clocked, and measure current at the system level with the intended firmware and external loads.

Assign sensitive analog or communication-adjacent pins early and route them away from switching and high-current paths. Keep oscillator and reset-related connections short, follow the reference-circuit values in the manufacturer application information, and provide clean ground references beneath and around the device. Although the MCU is compact, disciplined return-current planning is important for reliable low-voltage operation and electromagnetic behavior.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available product information confirms the STM32L011G3U6 identity, architecture, memory, voltage configurations, package and delivery format but does not explicitly state the requested compliance declarations. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals and automotive qualification status in the current manufacturer documentation before production release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

STM32L011G3U6 datasheet STM32L011G3U6 pinout STM32L011G3U6 datasheet pdf STM32L011G3U6 equivalent STM32L011G3U6 replacement STM32L011G3U6 price STM32L011G3U6 stock STMicroelectronics STM32L011G3U6 STM32L011G3U6 32MHz Cortex-M0+ STM32L011G3U6 28 UFQFPN STM32L011G3U6 low power sensor STM32L011G3U6 vs STM32G0C1KEU6N STM32L011G3U6 application circuit STM32L011G3U6 footprint

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics STM32L011G3U6 STM32L011G3 STM32L011x3/x4 STM32L0 Arm Cortex-M0+ Cortex-M0+ RISC core ultra-low-power microcontroller 32-bit microcontroller semiconductor embedded control 8 KB Flash memory 32 MHz 1.8 V 2.5 V 3.3 V 28-UFQFPN QFN package family surface-mount package battery-powered sensor node industrial control IoT endpoint reset and supply management STM32G0C1KEU6N
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں