STM32L011G3U6 - 32MHz Cortex-M0+ MCU | STMicroelectronics
MPN: STM32L011G3U6 ✓ Hoạt độngSTM32L011G3U6 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, peripherals and communication interfaces on one device. The STM32L0 access-line family combines a compact Arm Cortex-M0+ processor with energy-focused design, providing a platform for control, sensing, communication and data acquisition without requiring a separate processor and external memory.
The STM32L011G3U6 includes an Arm Cortex-M0+ RISC core, 8 KB Flash and 32 MHz processing capability. Its 28-UFQFPN 4 x 4 mm package supports compact PCB layouts, while the supported 1.8 V, 2.5 V and 3.3 V operating levels accommodate both low-voltage energy-harvesting systems and conventional 3.3 V electronics. The manufacturer describes the STM32L011x3/x4 family as an ultra-low-power access-line platform.
The device is organized around the Arm Cortex-M0+ architecture, a 32-bit RISC instruction set designed for efficient embedded control. Flash memory retains programmed firmware when power is removed, allowing autonomous operation after reset. The manufacturer product page identifies reset and supply-management functions as part of the family architecture, supporting compact systems that need controlled startup behavior and predictable power management.
Typical uses include battery-powered sensor nodes, compact industrial control modules, low-power IoT endpoints, wearable accessories, metering equipment and embedded instruments. The small package is particularly useful where board area is constrained but a general-purpose 32-bit control platform is required. Designers should select the appropriate external clock, decoupling and programming connections according to the manufacturer's pin and application guidance.
A key design consideration is the balance between processing capability, low-power operation and board density. The 8 KB Flash capacity should be checked against the final firmware image, including bootloader, application code and configuration data. The 32 MHz maximum CPU frequency also requires attention to clock configuration, peripheral timing and power-management settings during firmware development.
This product reference combines the device's principal architecture, memory, package and supply information with practical design guidance, sourcing questions, and a clear comparison against related STMicrocontrollers. It is intended to help engineers evaluate fit, plan firmware and hardware integration, and determine whether the STM32L011G3U6 belongs in an ultra-low-power embedded design.
Bộ thay thế dễ dàng lắp đặt cho STM32L011G3U6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếSTM32L011G3U6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 8 KB |
| Flash Organization | 8K x 8 bits |
| Supported Supply Voltage | 1.8 V, 2.5 V or 3.3 V |
| Hộp | 28-UFQFPN, 4 x 4 mm |
| Số chân | 28 pins |
| Kiểu lắp đặt | Surface mount |
| Delivery Format | Tray |
| Series | STM32L0 |
| Family | STM32L011x3/x4 access line |
| Core Architecture | Arm Cortex-M0+ RISC |
| Reset and Supply Management | Supported |
Hướng dẫn cấu hình chân STM32L011G3U6 28-ufqfpn, 4 x 4 mm
Cấu hình chân cho STM32L011G3U6 (28-ufqfpn, 4 x 4 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L011G3U6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L011G3U6 phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Node, Compact Industrial Control Module, Low-Power IoT Endpoint, Portable Metering Instrument, Wearable Accessory Controller, Embedded Test and Measurement Instrument.
Battery-Powered Sensor Node
The STM32L011G3U6 fits a compact sensor node because its Arm Cortex-M0+ core provides 32-bit control at up to 32 MHz while the device belongs to an ultra-low-power STM32L0 access-line family. The 8 KB Flash is suitable for small acquisition, thresholding and communication-control firmware, provided the final image fits with margin. Its 28-UFQFPN 4 x 4 mm package reduces board area, and support for 1.8 V, 2.5 V and 3.3 V supplies permits integration with low-voltage sensors. For battery life, configure the MCU's sleep modes, peripheral clocks and wake sources carefully and measure the complete operating profile rather than relying on CPU frequency alone.
Được đề xuất
Compact Industrial Control Module
STM32L011G3U6 is appropriate for compact industrial controls that need deterministic embedded processing without a large processor footprint. Its Cortex-M0+ RISC core operates up to 32 MHz, while the 28-UFQFPN package leaves board perimeter available for connectors and protection components. The device's 1.8 V, 2.5 V and 3.3 V operating choices support multiple industrial interface arrangements. Engineers should verify every required peripheral, I/O count and timing function against the manufacturer pin table. Firmware should include appropriate fault handling and watchdog strategy, while PCB design should isolate switching nodes and provide stable decoupling close to the device.
Được đề xuất
Low-Power IoT Endpoint
The STM32L011G3U6 can form the control core of a low-power IoT endpoint when the application fits within 8 KB of Flash and uses a small number of external interfaces. The 32 MHz Cortex-M0+ core can execute protocol framing, sensor management and local state handling, while the 4 x 4 mm 28-pin package supports dense terminal-board layouts. Selection should account for radio-control signals, antenna interfaces and any buffering that cannot be integrated into the MCU. Low-power performance depends on the selected system architecture, including sleep duration, wake-up frequency and radio current, so evaluate the complete product duty cycle with representative peripheral loads.
Được đề xuất
Portable Metering Instrument
STM32L011G3U6 suits portable metering equipment where low power, compact packaging and local control are important. The device's 8 KB Flash can hold a focused firmware image for measurement sequencing, calibration handling and data output, while its Cortex-M0+ architecture provides a 32-bit processing platform at up to 32 MHz. Its supply-voltage options allow design flexibility around sensor and display circuitry. For accurate measurement, use the manufacturer guidance for analog-capable pins, reference routing and grounding. Keep sensitive analog paths away from fast digital return currents and verify the selected operating voltage against all peripheral and I/O limits before schematic release.
Được đề xuất
Wearable Accessory Controller
The STM32L011G3U6 is a logical controller for a small wearable accessory because its 28-UFQFPN 4 x 4 mm package occupies little board area and its STM32L0 family emphasizes ultra-low-power operation. The 32 MHz Cortex-M0+ core is appropriate for gesture logic, sensor coordination and communication sequencing, provided the application remains within the 8 KB Flash constraint. Low-voltage operation at 1.8 V, 2.5 V or 3.3 V can simplify integration with compact battery and sensor systems. Mechanical and thermal design remain critical: keep the MCU away from heat-generating components, minimize exposed area where needed, and confirm package details against the manufacturer drawing.
Được đề xuất
Embedded Test and Measurement Instrument
STM32L011G3U6 can be used in small test and measurement instruments when the required firmware, interface count and memory fit its 8 KB Flash limit. The 32 MHz Cortex-M0+ RISC core supports control sequencing, configuration handling and data formatting, while the compact 28-pin UFQFPN package preserves space for analog, power and connector sections. The device supports 1.8 V, 2.5 V and 3.3 V configurations, enabling tailored rail selection. Use the manufacturer pin descriptions to choose appropriate signal types, and follow the application guidance for decoupling and clock configuration. A higher-memory STM32 family may be preferable if data logging, complex UI control or extensive protocol stacks exceed the available Flash.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L011G3U6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32G0C1KEU6N | STM32G474CET6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Series | STM32L0 | STM32G0 | STM32G4 |
| Pin-to-Pin Compatibility | Reference footprint | Not established as drop-in | Not established as drop-in |
Bảo phân biệt quan trọng
- Compact STM32L0 access-line implementation (vsSTM32G0C1KEU6N)
- Low-voltage supply flexibility (vsSTM32G474CET6)
- Dedicated 32-bit control platform (vsATTINY13A-SUR)
Ghi chú thiết kế
Choose the supply rail and operating mode from the manufacturer's electrical limits before laying out the power network. The STM32L011G3U6 supports 1.8 V, 2.5 V and 3.3 V configurations, but the selected voltage also constrains I/O behavior, clocking and peripheral use. Place the required bulk and high-frequency decoupling capacitors close to their associated pins, keep the return path short and verify startup behavior for the complete rail arrangement.
Use the manufacturer package drawing and land pattern rather than a generic square-QFN footprint. The 28-UFQFPN is only 4 x 4 mm, so small routing errors can move a trace beneath the exposed thermal area or interfere with adjacent pads. Confirm pin-one orientation, pad dimensions, solder-mask clearance and the exposed-pad connection against the official package drawing before releasing artwork.
The 8 KB Flash limit is the most immediate design constraint. Budget space for startup code, peripheral drivers, communication handlers, calibration data and future fixes rather than sizing the design from application code alone. Also verify the number and electrical type of required I/O pins, since a firmware-compatible MCU in a different package cannot be substituted without a PCB redesign.
Validate battery life using the complete duty cycle, including sensor conversion, communications, processing and sleep periods. A 32 MHz maximum CPU frequency describes performance capability, not continuous power consumption. Use the manufacturer's clock-tree, sleep-mode and peripheral-control guidance to prevent unused blocks from remaining clocked, and measure current at the system level with the intended firmware and external loads.
Assign sensitive analog or communication-adjacent pins early and route them away from switching and high-current paths. Keep oscillator and reset-related connections short, follow the reference-circuit values in the manufacturer application information, and provide clean ground references beneath and around the device. Although the MCU is compact, disciplined return-current planning is important for reliable low-voltage operation and electromagnetic behavior.
Thông tin tuân thủ
The available product information confirms the STM32L011G3U6 identity, architecture, memory, voltage configurations, package and delivery format but does not explicitly state the requested compliance declarations. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals and automotive qualification status in the current manufacturer documentation before production release.