STMicroelectronics

STM32L052C8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

MPN: STM32L052C8T6 ✓ فعال
2.5 V or 3.3 V Vdss 48-LQFP, 7 mm × 7 mm Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

STM32L052C8T6 جائزہ

The STMicroelectronics STM32L052C8T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz maximum clock, 64 KB of Flash memory, and a 48-LQFP 7 mm × 7 mm package. It integrates one 12-bit ADC with hardware oversampling, one DAC, two ultra-low-power comparators, multiple timers, an RTC, and USB 2.0 crystal-less connectivity for compact control and sensor systems.

An ultra-low-power microcontroller is an embedded semiconductor that combines a processor core, memory, analog interfaces, timers, and communication peripherals while minimizing energy use during active, sleep, and standby operation. The STM32L0 series belongs to the Arm Cortex-M microcontroller hierarchy and is designed for battery-powered instruments, connected sensors, industrial controls, and other systems where low standby current and compact integration are central requirements.

The STM32L052C8T6 provides 64 KB of Flash and a 32 MHz Arm Cortex-M0+ processor. Its analog subsystem includes one 12-bit ADC with hardware oversampling and one DAC, while two comparators support low-power threshold detection. The device also provides USB 2.0 crystal-less connectivity, one RTC, one SysTick timebase, three general-purpose 16-bit timers, one basic timer, one low-power timer, and two watchdogs.

Its peripheral mix supports both event-driven sensing and periodic control. Hardware oversampling can improve effective ADC resolution when the application can accept a longer conversion sequence, while the DAC enables analog output from a compact controller. The crystal-less USB interface simplifies designs that do not require an external USB clock source, although final firmware and board-level validation remain necessary.

Typical uses include USB-connected low-power data loggers, industrial sensor nodes, compact environmental monitors, battery-powered accessories, and USB-to-serial or configuration interfaces. The 48-LQFP package also exposes more I/O than smaller microcontroller packages, making the device useful when a board needs USB, mixed analog inputs, and several timers without moving to a higher pin count.

Designers should preserve USB signal integrity with a controlled impedance PCB layout, place decoupling capacitors close to the supply pins, and follow the pin-description table in the manufacturer datasheet when assigning board functions. Verify oscillator, USB, analog-reference, and low-power-mode requirements against the electrical characteristics before releasing a production layout.

This page organizes the core MCU specifications, package details, application guidance, design considerations, and qualified drop-in alternatives into a single engineering reference for evaluating the STM32L052C8T6 in new or existing 48-LQFP designs.

کے لیے ڈراپ اِن متبادل STM32L052C8T6 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں STM32L052C8T6 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, Communication Interfaces, Comparators, Core.

STMicroelectronics
Package: 48-LQFP (7x7 mm)
ADC: 12-bit, up to 10 channels, 1.14 Msps
Communication Interfaces: USART, SPI, I2C, USB (on selected variants)
موازنہ کریں STM32L052C8T6 →
STMicroelectronics
Package: LQFP-48
ADC: 12-bit, 16 channels
Communication Interfaces: I2C, SPI, USART, LPUART
موازنہ کریں STM32L052C8T6 →

STM32L052C6T6

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 48-LQFP (7x7)
Flash memory is 48 KB versus 64 KB, a 16 KB or 25% reduction; CPU frequency remains 32 MHz

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

STM32L052C6T7TR

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 48-LQFP (7x7)
Flash memory is 48 KB versus 64 KB, a 25% reduction, while the T7 suffix changes the temperature grade

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

STM32L052C8T7TR

✅ ڈراپ-اِن
📦 48-LQFP (7x7)
Flash remains 64 KB and CPU frequency remains 32 MHz; the T7 suffix changes the temperature grade

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

STM32L052C8T6D

✅ ڈراپ-اِن
📦 48-LQFP (7x7)
Flash remains 64 KB and CPU frequency remains 32 MHz; the D ordering suffix changes the qualification or temperature designation

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

STM32L052C8T6 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 32 MHz
Architecture 32-bit RISC
Flash Memory 64 KB
Flash Organization 64K × 8 bits
آپریٹنگ سپلائی وولٹیج 2.5 V or 3.3 V
ADC Resolution 12 bits
ADC Oversampling Hardware oversampling
Comparator Count 2 comparators
General-Purpose Timer Count 3 timers
Low-Power Timer 1 LPTIM
Basic Timer 1 timer
RTC 1 real-time clock
Watchdogs 2 watchdogs
USB Interface USB 2.0 crystal-less
پیکیج 48-LQFP, 7 mm × 7 mm
ماؤنٹنگ ٹائپ Surface mount
Packaging Tray
RoHS اسٹیٹس Compliant
Moisture Sensitivity Level MSL 3

STM32L052C8T6 48-lqfp, 7 mm × 7 mm پن کنفیگریشن گائیڈ

STM32L052C8T6 (48-lqfp, 7 mm × 7 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

STM32L052C8T6 کے لیے 48-lqfp, 7 mm × 7 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM32L052C8T6.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

STM32L052C8T6 کے لیے موزوں ہے 6 ایپلیکیشنs: USB-Connected Environmental Sensor Node, Industrial Condition Monitoring, Battery-Powered Field Logger, USB-to-Serial Configuration Interface, Low-Power Analog Control System, Compact Access-Control Terminal.

🧩

USB-Connected Environmental Sensor Node

The STM32L052C8T6 fits compact environmental monitoring because its 12-bit ADC can acquire sensor signals while the hardware oversampling function improves effective conversion quality. The 64 KB Flash provides room for acquisition routines, calibration, USB communication, and field-upgrade logic, while the 32 MHz Cortex-M0+ core handles sampling and protocol processing. Its USB 2.0 crystal-less interface can simplify host-connected logging without a separate USB bridge. A practical design should use the RTC and low-power timer for scheduled sampling, then suspend the ADC and USB peripheral between measurements to reduce average energy use.

🏭

Industrial Condition Monitoring

The STM32L052C8T6 is appropriate for industrial condition-monitoring modules that combine periodic sensor sampling with local event logging. Its three 16-bit general-purpose timers, one low-power timer, two comparators, RTC, and two watchdogs support trigger capture, threshold detection, time stamping, and autonomous low-duty-cycle operation. The 48-LQFP package exposes a practical mix of digital and analog connections without the size of a high-pin-count MCU. For deployed equipment, operate within the selected temperature grade and validate analog accuracy, oscillator behavior, and communication reliability over the complete product temperature range.

⚡

Battery-Powered Field Logger

The STM32L052C8T6 supports battery-powered field logging because the STM32L0 architecture combines a 32 MHz Cortex-M0+ processor with low-power operating modes, an RTC, and low-power timing peripherals. The 64 KB Flash can store event records, configuration, and USB export routines, while the ADC and comparators can monitor the measured quantity and battery threshold. Schedule wake-ups through the low-power timer or RTC to avoid continuous CPU operation. Average-current calculations should include regulator quiescent current, sensor self-heating, USB attachment, and the duration of each acquisition and communications cycle.

🌐

USB-to-Serial Configuration Interface

The STM32L052C8T6 can serve as a USB-to-serial or configuration interface because it combines crystal-less USB 2.0 connectivity with multiple general-purpose timers and 64 KB of Flash. Its UART and timer resources allow protocol timing, framing, bootloader support, and device-control functions to be consolidated into one controller. The 48-LQFP package also provides enough pins for interface signals, status indicators, and control inputs in applications that would otherwise need additional glue logic. Validate USB enumeration, suspend behavior, clock tolerance, and host compatibility using the device’s complete firmware stack.

🔧

Low-Power Analog Control System

The STM32L052C8T6 is suited to compact analog-control systems that require sensing and an analog output on the same board. The 12-bit ADC with hardware oversampling supports higher-precision measurements when conversion time permits, while the integrated DAC provides a controllable analog output for excitation or reference generation. Two comparators can perform fast threshold actions without waking the CPU, and the general-purpose timers can control periodic updates. Keep analog input paths short and shielded, use the manufacturer’s bypass recommendations, and confirm DAC output settling and ADC acquisition requirements in the electrical-characteristics tables.

🔐

Compact Access-Control Terminal

The STM32L052C8T6 can coordinate a compact access-control terminal that reads a peripheral identifier, drives local indications, records access events, and exposes configuration through USB. The 32 MHz Cortex-M0+ core supports the communication stack and control logic, while the RTC provides event timestamps and the timers organize reader polling and indicator timing. Its 48-LQFP package makes the device accessible for prototypes and medium-density terminal boards with several external interfaces. Production designs should include appropriate input protection, defined reset behavior, firmware update strategy, and verification of all external-device timing margins.

تجویز کردہ پروڈکٹس کا خلاصہ

STM32L052C8T6 STMicroelectronics استعمال ہوتا ہے: USB-Connected Environmental Sensor Node, Industrial Condition Monitoring, Battery-Powered Field Logger, USB-to-Serial Configuration Interface, Low-Power Analog Control System, Compact Access-Control Terminal STM32L052C8T7TR Same-family temperature-grade alternative استعمال ہوتا ہے: USB-Connected Environmental Sensor Node, USB-to-Serial Configuration Interface STM32L052C8T6D Same-family ordering alternative استعمال ہوتا ہے: Industrial Condition Monitoring, Compact Access-Control Terminal STM32L052C6T6 Reduced-Flash same-package alternative استعمال ہوتا ہے: Battery-Powered Field Logger, Low-Power Analog Control System
What are the key specifications of STM32L052C8T6 that engineers should know?
The STM32L052C8T6 is a 32 MHz ultra-low-power Arm Cortex-M0+ microcontroller with 64 KB of Flash, one 12-bit ADC, one DAC, two comparators, USB 2.0 crystal-less connectivity, and a 48-LQFP package. According to the STMicroelectronics manufacturer datasheet, it also includes three 16-bit general-purpose timers, one low-power timer, one basic timer, an RTC, SysTick, and two watchdogs. These resources support compact USB-connected sensing, monitoring, logging, and industrial-control designs without requiring a larger external mixed-signal controller.
What is the operating voltage of STM32L052C8T6?
The STM32L052C8T6 operates from a 2.5 V or 3.3 V supply. The manufacturer datasheet defines the electrical limits for each supported supply range, including reset, oscillator, ADC, DAC, USB, and I/O behavior. Use the 3.3 V operating point when designing USB-connected equipment unless the board has been specifically qualified for the lower-voltage mode. Check the complete electrical-characteristics tables and maximum-frequency conditions before finalizing the power architecture.
Where can I download the STM32L052C8T6 datasheet PDF?
The STM32L052C8T6 datasheet PDF can be downloaded from the official STMicroelectronics document at https://www.st.com/resource/en/datasheet/stm32l052c6.pdf. That document covers the STM32L052x6 and STM32L052x8 families, including the Cortex-M0+ core, 32 MHz clocking, 64 KB Flash configuration, USB interface, ADC, DAC, comparators, timers, memory map, package information, and electrical characteristics. Use the pin-description table and package drawings in that document when laying out the 48-LQFP footprint.
Where can I find the STM32L052C8T6 pinout?
The STM32L052C8T6 pinout is documented in the pin-description table and package drawings in the STMicroelectronics manufacturer datasheet. The device uses a 48-LQFP package with a 7 mm × 7 mm body, so its land pattern must match the specified lead spacing, body dimensions, and exposed pad arrangement where applicable. Use the manufacturer pin table when assigning power, ground, reset, oscillator, USB, analog, and I/O functions; do not infer pin names solely from neighboring packages in the STM32 family.
Is STM32L052C8T6 suitable for low-power sensor applications?
The STM32L052C8T6 is suitable for low-power sensor applications because it combines an Arm Cortex-M0+ core operating up to 32 MHz with a 12-bit ADC, hardware oversampling, comparators, RTC, low-power timer, and low-power watchdog functions. According to the STMicroelectronics manufacturer datasheet, the device also supports deep low-power operating modes. A battery-operated design should use the RTC and LPTIM for periodic wake-ups, disable unused peripherals, and select external components according to the leakage and wake-up requirements of the final system.
What can replace the STM32L052C8T6 on the same 48-LQFP footprint?
Several STM32L052-family devices can be considered for a footprint-compatible replacement, including STM32L052C6T6, STM32L052C6T7TR, STM32L052C8T7TR, and STM32L052C8T6D. A true drop-in decision still requires checking Flash size, temperature grade, pin multiplexing, USB behavior, firmware support, and the exact ordering suffix. The C6 variants provide 48 KB rather than 64 KB of Flash, while the T7 and D selections change the temperature or ordering characteristics. Existing firmware should be recompiled and tested for every substitution.
What is the best drop-in replacement for STM32L052C8T6?
The closest drop-in replacement is STM32L052C8T7TR because it retains the STM32L052C8 64-KB-Flash device identity and 48-LQFP footprint while changing the temperature-grade suffix. STM32L052C6T6 and STM32L052C6T7TR are footprint-compatible alternatives, but their 48 KB of Flash is 25% less than the target’s 64 KB. Treat every replacement as a hardware-and-firmware qualification decision: compare pin functions, voltage limits, clocking, USB, analog peripherals, and the complete operating-temperature range in the manufacturer datasheets.
What is the best cross-brand equivalent for STM32L052C8T6?
No cross-brand 48-LQFP drop-in equivalent is established for the STM32L052C8T6. Cross-manufacturer MCU candidates may use the same Arm Cortex-M0+ architecture, but matching the package outline does not guarantee matching pin multiplexing, memory map, USB implementation, low-power behavior, peripheral registers, or firmware compatibility. For production second sourcing, use a manufacturer-specific device from the STM32L052 family or perform a complete hardware and firmware qualification of any candidate before declaring it a drop-in replacement.
STM32L052C8T6 vs STM32L052C8T7TR — which is better for industrial control?
STM32L052C8T7TR is generally the better fit when an industrial product requires a higher temperature grade than the standard STM32L052C8T6. Both retain the STM32L052C8 64 KB Flash configuration, 32 MHz Cortex-M0+ architecture, and 48-LQFP package, but the T7 selection changes the operating-temperature classification. For either device, confirm the exact limits in the STMicroelectronics manufacturer datasheet and validate USB startup, analog accuracy, timer behavior, and low-power operation at the product’s worst-case temperature.
What is the difference between STM32L052C8T6 and STM32L052C6T6?
The primary difference is Flash capacity: STM32L052C8T6 contains 64 KB of Flash, while STM32L052C6T6 contains 48 KB, a reduction of 16 KB or 25%. Both devices belong to the STM32L052 ultra-low-power family and are associated with the 48-LQFP 7 mm × 7 mm package. The smaller Flash option is appropriate only if the application image, bootloader, update data, and future margin fit within 48 KB. Peripheral availability and the complete electrical specification should still be compared before substitution.
When should I choose STM32L052C8T6 instead of STM32L052C6T6?
Choose STM32L052C8T6 when firmware size, bootloader requirements, or planned feature growth requires the larger 64 KB Flash allocation. The STM32L052C6T6 offers 48 KB, which is 16 KB less and may create pressure during firmware development or future updates. Both devices support the STM32L0 low-power feature set, including a 12-bit ADC, DAC, comparators, timers, RTC, and USB connectivity. Select by verifying memory requirements first, then confirming pin compatibility, temperature grade, and firmware support for the production configuration.
Is STM32L052C8T6 suitable for USB data-logger applications?
The STM32L052C8T6 is suitable for USB data-logger applications because it integrates USB 2.0 crystal-less connectivity, 64 KB of Flash, a 12-bit ADC with hardware oversampling, an RTC, and low-power timing resources. According to the STMicroelectronics manufacturer datasheet, the device includes the analog and timing peripherals needed to sample periodically and retain time references between events. Design the USB route with controlled impedance, compliant power behavior, ESD protection, and firmware that suspends sampling and communications when no data transfer is required.
How much power does the STM32L052C8T6 consume?
STM32L052C8T6 power consumption depends on supply voltage, CPU activity, clock configuration, peripheral activity, and the selected low-power mode. The manufacturer datasheet provides operating-current and shutdown-current characteristics across multiple operating conditions, so no single consumption value applies to every design. Estimate the average current by weighting active-mode current, standby or shutdown current, and wake-up duration. Include regulator quiescent current and sensor load when calculating battery life rather than considering the microcontroller alone.
Where can I buy STM32L052C8T6 online?
Use the Request a Quote form on this page to request STM32L052C8T6 pricing, stock confirmation, minimum order quantity, and current lead time. The form is the appropriate channel for a firm quotation because component availability and commercial terms can change rapidly. For design confirmation, use the exact ordering code STM32L052C8T6 and review its 48-LQFP package and tray presentation before placing the order. Avoid substituting a similarly named device without checking memory, temperature grade, and packing code.
What is the price of STM32L052C8T6?
The current STM32L052C8T6 price depends on order quantity, inventory, and requested delivery terms. Submit the Request a Quote form on this page with the target quantity and required ship-to information for a current quotation. The form also helps confirm whether the order can be fulfilled as a standard tray shipment or requires a different authorized supply arrangement. Compare the final quotation against your approved BOM, expected demand, and production schedule rather than relying on an outdated historical price.
What is the lead time and stock status for STM32L052C8T6?
Current stock and lead time for STM32L052C8T6 should be confirmed through the Request a Quote form on this page. Enter the required quantity, shipment destination, and target date so the quote can reflect the available supply route and manufacturing schedule. For new designs, request enough schedule visibility to cover PCB fabrication, firmware validation, and production assembly. If continuity is critical, consider sourcing a qualified same-family alternative and completing a formal second-source qualification.

کے لیے انجینئرنگ ریفرنس ڈیٹا STM32L052C8T6 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the STM32L052C8T6 when a board needs a 32 MHz Arm Cortex-M0+ controller with USB 2.0 crystal-less connectivity, a 12-bit ADC with hardware oversampling, a DAC, two comparators, RTC support, and 64 KB of Flash in a 48-LQFP package. Choose STM32L052C8T7TR when the same memory and core configuration is needed with the T7 temperature-grade selection. Consider STM32L052C6T6 or STM32L052C6T7TR only when the application, bootloader, and update plan fit within 48 KB of Flash. STM32L052C8T6D is relevant when its D designation satisfies the product’s qualification requirement. No cross-brand candidate should be treated as automatically interchangeable: even an LQFP-48 outline can conceal differences in pin multiplexing, low-power behavior, USB implementation, peripherals, and firmware support. Validate the exact manufacturer ordering code against electrical limits, temperature requirements, firmware configuration, and the PCB footprint before production release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ STM32L052C6T6 STM32L052C6T7TR STM32L052C8T7TR STM32L052C8T6D
Package 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 64 KB 48 KB 48 KB 64 KB 64 KB
ADC 1 × 12-bit ADC with hardware oversampling 1 × 12-bit ADC with hardware oversampling 1 × 12-bit ADC with hardware oversampling 1 × 12-bit ADC with hardware oversampling 1 × 12-bit ADC with hardware oversampling
DAC 1 DAC 1 DAC 1 DAC 1 DAC 1 DAC
Comparators 2 ultra-low-power comparators 2 ultra-low-power comparators 2 ultra-low-power comparators 2 ultra-low-power comparators 2 ultra-low-power comparators
USB Interface USB 2.0 crystal-less USB 2.0 crystal-less USB 2.0 crystal-less USB 2.0 crystal-less USB 2.0 crystal-less

اہم امتیازی خصوصیات

  • Larger Flash allocation than the C6 family options (بمقابلہSTM32L052C6T6)
  • Same core and clock with a higher temperature-grade ordering option (بمقابلہSTM32L052C8T7TR)
  • Compact analog and connectivity integration (بمقابلہSTM32L052C6T7TR)

ڈیزائن نوٹس

Place every required supply-decoupling capacitor adjacent to its corresponding power pin, with the shortest possible ground return. Follow the manufacturer datasheet capacitor values, placement, and land-pattern instructions rather than treating the generic decoupling values as interchangeable. Keep the USB differential pair over a continuous reference plane, use the layout geometry specified by the manufacturer, and minimize vias and stubs. A controlled-impedance USB route is especially important because a correct 48-LQFP footprint cannot compensate for signal-integrity errors on the USB interface.

Design the supply for the device’s 2.5 V or 3.3 V operating mode and account for USB-connected operating states as well as battery-only states. Check input-voltage tolerance, brownout behavior, regulator startup, and the maximum operating frequency associated with each voltage range in the manufacturer electrical tables. For low-power designs, use the RTC and LPTIM for scheduled wake-ups and disable unused analog or communication blocks. Average-current estimates must include regulator quiescent current and external sensor consumption, not only the MCU current.

Use the manufacturer pin-description table for the 48-LQFP assignment and preserve the documented exposed-pad or thermal-land arrangement where the package drawing defines one. Keep analog inputs away from USB, switching, and high-current return paths; use a continuous ground reference and short traces between the ADC source and its pins. Verify the analog supply and reference bypass arrangement using the application guidance in the manufacturer datasheet. After routing, perform continuity, impedance, and signal-integrity checks on every production board revision.

Do not assume that a similar STM32L052 order code is electrically identical. The C6 and C8 selections differ by 16 KB of Flash, while T6, T7, T6D, and T7TR identify different qualification or delivery characteristics. Before substitution, check the exact package, pin multiplexing, voltage range, temperature grade, USB implementation, firmware support, and orderable packing. The STM32L052C8T6D result explicitly identifies a 64-KB-Flash 48-LQFP device, but every approved alternate still requires manufacturer datasheet review and board-level validation.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

RoHS compliance and MSL 3 are identified in the STM32L052C8T6 component record. No authoritative REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is established for this exact ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

STM32L052C8T6 STM32L052C8T6 datasheet STM32L052C8T6 datasheet pdf STM32L052C8T6 pinout STM32L052C8T6 specifications STM32L052C8T6 equivalent STM32L052C8T6 replacement STM32L052C8T6 footprint STM32L052C8T6 vs STM32L052C8T7TR STMicroelectronics STM32L052C8T6 STM32L052C8T6 USB sensor controller STM32L052C8T6 48 LQFP STM32L052C8T6 price STM32L052C8T6 stock

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics STM32L052C8T6 STM32L052C6T6 STM32L052C6T7TR STM32L052C8T7TR STM32L052C8T6D Arm Cortex-M0+ STM32L0 ultra-low-power microcontroller 32-bit RISC microcontroller embedded microcontroller semiconductor 48-LQFP LQFP package surface-mount package USB 2.0 12-bit ADC hardware oversampling DAC ultra-low-power comparator real-time clock LPTIM SysTick RoHS MSL 3
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں