STM32L052C8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
MPN: STM32L052C8T6 ✓ Hoạt độngSTM32L052C8T6 Tóm tắt
An ultra-low-power microcontroller is an embedded semiconductor that combines a processor core, memory, analog interfaces, timers, and communication peripherals while minimizing energy use during active, sleep, and standby operation. The STM32L0 series belongs to the Arm Cortex-M microcontroller hierarchy and is designed for battery-powered instruments, connected sensors, industrial controls, and other systems where low standby current and compact integration are central requirements.
The STM32L052C8T6 provides 64 KB of Flash and a 32 MHz Arm Cortex-M0+ processor. Its analog subsystem includes one 12-bit ADC with hardware oversampling and one DAC, while two comparators support low-power threshold detection. The device also provides USB 2.0 crystal-less connectivity, one RTC, one SysTick timebase, three general-purpose 16-bit timers, one basic timer, one low-power timer, and two watchdogs.
Its peripheral mix supports both event-driven sensing and periodic control. Hardware oversampling can improve effective ADC resolution when the application can accept a longer conversion sequence, while the DAC enables analog output from a compact controller. The crystal-less USB interface simplifies designs that do not require an external USB clock source, although final firmware and board-level validation remain necessary.
Typical uses include USB-connected low-power data loggers, industrial sensor nodes, compact environmental monitors, battery-powered accessories, and USB-to-serial or configuration interfaces. The 48-LQFP package also exposes more I/O than smaller microcontroller packages, making the device useful when a board needs USB, mixed analog inputs, and several timers without moving to a higher pin count.
Designers should preserve USB signal integrity with a controlled impedance PCB layout, place decoupling capacitors close to the supply pins, and follow the pin-description table in the manufacturer datasheet when assigning board functions. Verify oscillator, USB, analog-reference, and low-power-mode requirements against the electrical characteristics before releasing a production layout.
This page organizes the core MCU specifications, package details, application guidance, design considerations, and qualified drop-in alternatives into a single engineering reference for evaluating the STM32L052C8T6 in new or existing 48-LQFP designs.
Bộ thay thế dễ dàng lắp đặt cho STM32L052C8T6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L052C8T6 (cùng hình factor và footprint) — khác nhau ở Package, ADC, Communication Interfaces, Comparators, Core.
STM32L052C6T6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L052C6T7TR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L052C8T7TR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L052C8T6D
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32L052C8T6 Tỷ lệ tối đa & tính chất điện
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 64 KB |
| Flash Organization | 64K × 8 bits |
| Điện áp cung cấp hoạt động | 2.5 V or 3.3 V |
| ADC Resolution | 12 bits |
| ADC Oversampling | Hardware oversampling |
| Comparator Count | 2 comparators |
| General-Purpose Timer Count | 3 timers |
| Low-Power Timer | 1 LPTIM |
| Basic Timer | 1 timer |
| RTC | 1 real-time clock |
| Watchdogs | 2 watchdogs |
| USB Interface | USB 2.0 crystal-less |
| Hộp | 48-LQFP, 7 mm × 7 mm |
| Kiểu lắp đặt | Surface mount |
| Packaging | Tray |
| Trạng thái RoHS | Compliant |
| Moisture Sensitivity Level | MSL 3 |
Hướng dẫn cấu hình chân STM32L052C8T6 48-lqfp, 7 mm × 7 mm
Cấu hình chân cho STM32L052C8T6 (48-lqfp, 7 mm × 7 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L052C8T6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L052C8T6 phù hợp cho 6 Áp dụngs: USB-Connected Environmental Sensor Node, Industrial Condition Monitoring, Battery-Powered Field Logger, USB-to-Serial Configuration Interface, Low-Power Analog Control System, Compact Access-Control Terminal.
USB-Connected Environmental Sensor Node
The STM32L052C8T6 fits compact environmental monitoring because its 12-bit ADC can acquire sensor signals while the hardware oversampling function improves effective conversion quality. The 64 KB Flash provides room for acquisition routines, calibration, USB communication, and field-upgrade logic, while the 32 MHz Cortex-M0+ core handles sampling and protocol processing. Its USB 2.0 crystal-less interface can simplify host-connected logging without a separate USB bridge. A practical design should use the RTC and low-power timer for scheduled sampling, then suspend the ADC and USB peripheral between measurements to reduce average energy use.
Được đề xuất
Industrial Condition Monitoring
The STM32L052C8T6 is appropriate for industrial condition-monitoring modules that combine periodic sensor sampling with local event logging. Its three 16-bit general-purpose timers, one low-power timer, two comparators, RTC, and two watchdogs support trigger capture, threshold detection, time stamping, and autonomous low-duty-cycle operation. The 48-LQFP package exposes a practical mix of digital and analog connections without the size of a high-pin-count MCU. For deployed equipment, operate within the selected temperature grade and validate analog accuracy, oscillator behavior, and communication reliability over the complete product temperature range.
Được đề xuất
Battery-Powered Field Logger
The STM32L052C8T6 supports battery-powered field logging because the STM32L0 architecture combines a 32 MHz Cortex-M0+ processor with low-power operating modes, an RTC, and low-power timing peripherals. The 64 KB Flash can store event records, configuration, and USB export routines, while the ADC and comparators can monitor the measured quantity and battery threshold. Schedule wake-ups through the low-power timer or RTC to avoid continuous CPU operation. Average-current calculations should include regulator quiescent current, sensor self-heating, USB attachment, and the duration of each acquisition and communications cycle.
Được đề xuất
USB-to-Serial Configuration Interface
The STM32L052C8T6 can serve as a USB-to-serial or configuration interface because it combines crystal-less USB 2.0 connectivity with multiple general-purpose timers and 64 KB of Flash. Its UART and timer resources allow protocol timing, framing, bootloader support, and device-control functions to be consolidated into one controller. The 48-LQFP package also provides enough pins for interface signals, status indicators, and control inputs in applications that would otherwise need additional glue logic. Validate USB enumeration, suspend behavior, clock tolerance, and host compatibility using the device’s complete firmware stack.
Được đề xuất
Low-Power Analog Control System
The STM32L052C8T6 is suited to compact analog-control systems that require sensing and an analog output on the same board. The 12-bit ADC with hardware oversampling supports higher-precision measurements when conversion time permits, while the integrated DAC provides a controllable analog output for excitation or reference generation. Two comparators can perform fast threshold actions without waking the CPU, and the general-purpose timers can control periodic updates. Keep analog input paths short and shielded, use the manufacturer’s bypass recommendations, and confirm DAC output settling and ADC acquisition requirements in the electrical-characteristics tables.
Được đề xuất
Compact Access-Control Terminal
The STM32L052C8T6 can coordinate a compact access-control terminal that reads a peripheral identifier, drives local indications, records access events, and exposes configuration through USB. The 32 MHz Cortex-M0+ core supports the communication stack and control logic, while the RTC provides event timestamps and the timers organize reader polling and indicator timing. Its 48-LQFP package makes the device accessible for prototypes and medium-density terminal boards with several external interfaces. Production designs should include appropriate input protection, defined reset behavior, firmware update strategy, and verification of all external-device timing margins.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L052C8T6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32L052C6T6 | STM32L052C6T7TR | STM32L052C8T7TR | STM32L052C8T6D |
|---|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 48 KB | 48 KB | 64 KB | 64 KB |
| ADC | 1 × 12-bit ADC with hardware oversampling | 1 × 12-bit ADC with hardware oversampling | 1 × 12-bit ADC with hardware oversampling | 1 × 12-bit ADC with hardware oversampling | 1 × 12-bit ADC with hardware oversampling |
| DAC | 1 DAC | 1 DAC | 1 DAC | 1 DAC | 1 DAC |
| Comparators | 2 ultra-low-power comparators | 2 ultra-low-power comparators | 2 ultra-low-power comparators | 2 ultra-low-power comparators | 2 ultra-low-power comparators |
| USB Interface | USB 2.0 crystal-less | USB 2.0 crystal-less | USB 2.0 crystal-less | USB 2.0 crystal-less | USB 2.0 crystal-less |
Bảo phân biệt quan trọng
- Larger Flash allocation than the C6 family options (vsSTM32L052C6T6)
- Same core and clock with a higher temperature-grade ordering option (vsSTM32L052C8T7TR)
- Compact analog and connectivity integration (vsSTM32L052C6T7TR)
Ghi chú thiết kế
Place every required supply-decoupling capacitor adjacent to its corresponding power pin, with the shortest possible ground return. Follow the manufacturer datasheet capacitor values, placement, and land-pattern instructions rather than treating the generic decoupling values as interchangeable. Keep the USB differential pair over a continuous reference plane, use the layout geometry specified by the manufacturer, and minimize vias and stubs. A controlled-impedance USB route is especially important because a correct 48-LQFP footprint cannot compensate for signal-integrity errors on the USB interface.
Design the supply for the device’s 2.5 V or 3.3 V operating mode and account for USB-connected operating states as well as battery-only states. Check input-voltage tolerance, brownout behavior, regulator startup, and the maximum operating frequency associated with each voltage range in the manufacturer electrical tables. For low-power designs, use the RTC and LPTIM for scheduled wake-ups and disable unused analog or communication blocks. Average-current estimates must include regulator quiescent current and external sensor consumption, not only the MCU current.
Use the manufacturer pin-description table for the 48-LQFP assignment and preserve the documented exposed-pad or thermal-land arrangement where the package drawing defines one. Keep analog inputs away from USB, switching, and high-current return paths; use a continuous ground reference and short traces between the ADC source and its pins. Verify the analog supply and reference bypass arrangement using the application guidance in the manufacturer datasheet. After routing, perform continuity, impedance, and signal-integrity checks on every production board revision.
Do not assume that a similar STM32L052 order code is electrically identical. The C6 and C8 selections differ by 16 KB of Flash, while T6, T7, T6D, and T7TR identify different qualification or delivery characteristics. Before substitution, check the exact package, pin multiplexing, voltage range, temperature grade, USB implementation, firmware support, and orderable packing. The STM32L052C8T6D result explicitly identifies a 64-KB-Flash 48-LQFP device, but every approved alternate still requires manufacturer datasheet review and board-level validation.
Thông tin tuân thủ
RoHS compliance and MSL 3 are identified in the STM32L052C8T6 component record. No authoritative REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is established for this exact ordering code.