STM32L052C8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
Référence : STM32L052C8T6 ✓ ActifSTM32L052C8T6 Présentation
An ultra-low-power microcontroller is an embedded semiconductor that combines a processor core, memory, analog interfaces, timers, and communication peripherals while minimizing energy use during active, sleep, and standby operation. The STM32L0 series belongs to the Arm Cortex-M microcontroller hierarchy and is designed for battery-powered instruments, connected sensors, industrial controls, and other systems where low standby current and compact integration are central requirements.
The STM32L052C8T6 provides 64 KB of Flash and a 32 MHz Arm Cortex-M0+ processor. Its analog subsystem includes one 12-bit ADC with hardware oversampling and one DAC, while two comparators support low-power threshold detection. The device also provides USB 2.0 crystal-less connectivity, one RTC, one SysTick timebase, three general-purpose 16-bit timers, one basic timer, one low-power timer, and two watchdogs.
Its peripheral mix supports both event-driven sensing and periodic control. Hardware oversampling can improve effective ADC resolution when the application can accept a longer conversion sequence, while the DAC enables analog output from a compact controller. The crystal-less USB interface simplifies designs that do not require an external USB clock source, although final firmware and board-level validation remain necessary.
Typical uses include USB-connected low-power data loggers, industrial sensor nodes, compact environmental monitors, battery-powered accessories, and USB-to-serial or configuration interfaces. The 48-LQFP package also exposes more I/O than smaller microcontroller packages, making the device useful when a board needs USB, mixed analog inputs, and several timers without moving to a higher pin count.
Designers should preserve USB signal integrity with a controlled impedance PCB layout, place decoupling capacitors close to the supply pins, and follow the pin-description table in the manufacturer datasheet when assigning board functions. Verify oscillator, USB, analog-reference, and low-power-mode requirements against the electrical characteristics before releasing a production layout.
This page organizes the core MCU specifications, package details, application guidance, design considerations, and qualified drop-in alternatives into a single engineering reference for evaluating the STM32L052C8T6 in new or existing 48-LQFP designs.
Alternatives de remplacement direct pour STM32L052C8T6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32L052C8T6 (même facteur de forme et même empreinte) — différant par Package, ADC, Communication Interfaces, Comparators, Core.
STM32L052C6T6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32L052C6T7TR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32L052C8T7TR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32L052C8T6D
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32L052C8T6 Valeurs maximales et caractéristiques électriques
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 64 KB |
| Flash Organization | 64K × 8 bits |
| Tension d'alimentation de fonctionnement | 2.5 V or 3.3 V |
| ADC Resolution | 12 bits |
| ADC Oversampling | Hardware oversampling |
| Comparator Count | 2 comparators |
| General-Purpose Timer Count | 3 timers |
| Low-Power Timer | 1 LPTIM |
| Basic Timer | 1 timer |
| RTC | 1 real-time clock |
| Watchdogs | 2 watchdogs |
| USB Interface | USB 2.0 crystal-less |
| Boîtier | 48-LQFP, 7 mm × 7 mm |
| Type de montage | Surface mount |
| Packaging | Tray |
| Statut RoHS | Compliant |
| Moisture Sensitivity Level | MSL 3 |
Guide de configuration des broches du STM32L052C8T6 48-lqfp, 7 mm × 7 mm
Configuration des broches du STM32L052C8T6 (boîtier 48-lqfp, 7 mm × 7 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32L052C8T6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32L052C8T6 convient pour 6 applications: USB-Connected Environmental Sensor Node, Industrial Condition Monitoring, Battery-Powered Field Logger, USB-to-Serial Configuration Interface, Low-Power Analog Control System, Compact Access-Control Terminal.
USB-Connected Environmental Sensor Node
The STM32L052C8T6 fits compact environmental monitoring because its 12-bit ADC can acquire sensor signals while the hardware oversampling function improves effective conversion quality. The 64 KB Flash provides room for acquisition routines, calibration, USB communication, and field-upgrade logic, while the 32 MHz Cortex-M0+ core handles sampling and protocol processing. Its USB 2.0 crystal-less interface can simplify host-connected logging without a separate USB bridge. A practical design should use the RTC and low-power timer for scheduled sampling, then suspend the ADC and USB peripheral between measurements to reduce average energy use.
Recommandé
Industrial Condition Monitoring
The STM32L052C8T6 is appropriate for industrial condition-monitoring modules that combine periodic sensor sampling with local event logging. Its three 16-bit general-purpose timers, one low-power timer, two comparators, RTC, and two watchdogs support trigger capture, threshold detection, time stamping, and autonomous low-duty-cycle operation. The 48-LQFP package exposes a practical mix of digital and analog connections without the size of a high-pin-count MCU. For deployed equipment, operate within the selected temperature grade and validate analog accuracy, oscillator behavior, and communication reliability over the complete product temperature range.
Recommandé
Battery-Powered Field Logger
The STM32L052C8T6 supports battery-powered field logging because the STM32L0 architecture combines a 32 MHz Cortex-M0+ processor with low-power operating modes, an RTC, and low-power timing peripherals. The 64 KB Flash can store event records, configuration, and USB export routines, while the ADC and comparators can monitor the measured quantity and battery threshold. Schedule wake-ups through the low-power timer or RTC to avoid continuous CPU operation. Average-current calculations should include regulator quiescent current, sensor self-heating, USB attachment, and the duration of each acquisition and communications cycle.
Recommandé
USB-to-Serial Configuration Interface
The STM32L052C8T6 can serve as a USB-to-serial or configuration interface because it combines crystal-less USB 2.0 connectivity with multiple general-purpose timers and 64 KB of Flash. Its UART and timer resources allow protocol timing, framing, bootloader support, and device-control functions to be consolidated into one controller. The 48-LQFP package also provides enough pins for interface signals, status indicators, and control inputs in applications that would otherwise need additional glue logic. Validate USB enumeration, suspend behavior, clock tolerance, and host compatibility using the device’s complete firmware stack.
Recommandé
Low-Power Analog Control System
The STM32L052C8T6 is suited to compact analog-control systems that require sensing and an analog output on the same board. The 12-bit ADC with hardware oversampling supports higher-precision measurements when conversion time permits, while the integrated DAC provides a controllable analog output for excitation or reference generation. Two comparators can perform fast threshold actions without waking the CPU, and the general-purpose timers can control periodic updates. Keep analog input paths short and shielded, use the manufacturer’s bypass recommendations, and confirm DAC output settling and ADC acquisition requirements in the electrical-characteristics tables.
Recommandé
Compact Access-Control Terminal
The STM32L052C8T6 can coordinate a compact access-control terminal that reads a peripheral identifier, drives local indications, records access events, and exposes configuration through USB. The 32 MHz Cortex-M0+ core supports the communication stack and control logic, while the RTC provides event timestamps and the timers organize reader polling and indicator timing. Its 48-LQFP package makes the device accessible for prototypes and medium-density terminal boards with several external interfaces. Production designs should include appropriate input protection, defined reset behavior, firmware update strategy, and verification of all external-device timing margins.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32L052C8T6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32L052C6T6 | STM32L052C6T7TR | STM32L052C8T7TR | STM32L052C8T6D |
|---|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 48 KB | 48 KB | 64 KB | 64 KB |
| ADC | 1 × 12-bit ADC with hardware oversampling | 1 × 12-bit ADC with hardware oversampling | 1 × 12-bit ADC with hardware oversampling | 1 × 12-bit ADC with hardware oversampling | 1 × 12-bit ADC with hardware oversampling |
| DAC | 1 DAC | 1 DAC | 1 DAC | 1 DAC | 1 DAC |
| Comparators | 2 ultra-low-power comparators | 2 ultra-low-power comparators | 2 ultra-low-power comparators | 2 ultra-low-power comparators | 2 ultra-low-power comparators |
| USB Interface | USB 2.0 crystal-less | USB 2.0 crystal-less | USB 2.0 crystal-less | USB 2.0 crystal-less | USB 2.0 crystal-less |
Principaux différenciateurs
- Larger Flash allocation than the C6 family options (vs STM32L052C6T6)
- Same core and clock with a higher temperature-grade ordering option (vs STM32L052C8T7TR)
- Compact analog and connectivity integration (vs STM32L052C6T7TR)
Notes de conception
Place every required supply-decoupling capacitor adjacent to its corresponding power pin, with the shortest possible ground return. Follow the manufacturer datasheet capacitor values, placement, and land-pattern instructions rather than treating the generic decoupling values as interchangeable. Keep the USB differential pair over a continuous reference plane, use the layout geometry specified by the manufacturer, and minimize vias and stubs. A controlled-impedance USB route is especially important because a correct 48-LQFP footprint cannot compensate for signal-integrity errors on the USB interface.
Design the supply for the device’s 2.5 V or 3.3 V operating mode and account for USB-connected operating states as well as battery-only states. Check input-voltage tolerance, brownout behavior, regulator startup, and the maximum operating frequency associated with each voltage range in the manufacturer electrical tables. For low-power designs, use the RTC and LPTIM for scheduled wake-ups and disable unused analog or communication blocks. Average-current estimates must include regulator quiescent current and external sensor consumption, not only the MCU current.
Use the manufacturer pin-description table for the 48-LQFP assignment and preserve the documented exposed-pad or thermal-land arrangement where the package drawing defines one. Keep analog inputs away from USB, switching, and high-current return paths; use a continuous ground reference and short traces between the ADC source and its pins. Verify the analog supply and reference bypass arrangement using the application guidance in the manufacturer datasheet. After routing, perform continuity, impedance, and signal-integrity checks on every production board revision.
Do not assume that a similar STM32L052 order code is electrically identical. The C6 and C8 selections differ by 16 KB of Flash, while T6, T7, T6D, and T7TR identify different qualification or delivery characteristics. Before substitution, check the exact package, pin multiplexing, voltage range, temperature grade, USB implementation, firmware support, and orderable packing. The STM32L052C8T6D result explicitly identifies a 64-KB-Flash 48-LQFP device, but every approved alternate still requires manufacturer datasheet review and board-level validation.
Informations de conformité
RoHS compliance and MSL 3 are identified in the STM32L052C8T6 component record. No authoritative REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is established for this exact ordering code.