TS974IYD - 12MHz Quad Rail-to-Rail Op Amp | STMicroelectronics
MPN: TS974IYD ✓ فعالTS974IYD جائزہ
An operational amplifier is an analog signal-conditioning IC that compares an input voltage with a feedback-defined reference and amplifies the resulting error voltage. The TS974 belongs to the rail-to-rail operational amplifier hierarchy, where the output can approach the supply rails. This characteristic is useful when the available signal range is small, while its low-noise and low-distortion behavior make the TS97x family suitable for audio preamplification and portable instrumentation.
The TS974IYD combines four amplifiers in one 14-SOIC package. Each channel has a gain-bandwidth product of 12 MHz and supports up to 100 mA of output current. Its 60 dB common-mode rejection ratio improves immunity to common-mode voltage on the input pair, while the 200 nA input bias current and 1 µA quiescent current per channel suit low-power circuitry. These characteristics support portable and battery-powered equipment operating from low supply voltages.
The device supports both single- and dual-supply arrangements. In a single-supply system, the input and output signal range requires attention near the rails even though the output stage has rail-to-rail swing. In a dual-supply circuit, the stated operating range extends from ±1.35 V to ±5 V. Because the TS974 is intended for low-noise amplification, resistor selection, decoupling, grounding, and output-load compatibility remain central to achieving the intended signal quality.
Typical uses include portable audio preamplification, low-level sensor conditioning, battery-powered measurement equipment, active filters, and general-purpose analog signal processing. Four channels in one package also reduce board area when a system needs several similar gain stages. The package pin arrangement and electrical characteristics must be checked against the manufacturer datasheet before applying it to a new board or using it as a replacement.
For a new design, begin with the required signal bandwidth, output swing, supply voltage, and load current. Place the bypass capacitor near the power pins, keep feedback loops compact, and verify that input common-mode and output swing requirements remain valid at the chosen gain. For an existing PCB, confirm the 14-SOIC footprint, pin functions, and electrical limits before substituting another amplifier.
This page consolidates the available manufacturer-family information, distributor listing details, ordering guidance, and drop-in comparison considerations. It is designed to help engineers identify whether the TS974IYD fits a low-voltage, low-noise quad-op-amp design before moving to detailed circuit review and datasheet verification.
کے لیے ڈراپ اِن متبادل TS974IYD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TS974IYD (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.
TS974IDT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →TS974IYD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Number of Amplifier Channels | 4 circuits |
| Amplifier Type | General-purpose operational amplifier |
| Output Swing | Rail-to-rail |
| Gain-Bandwidth Product | 12 MHz |
| Output Current per Channel | 100 mA |
| Input Bias Current | 200 nA |
| Common-Mode Rejection Ratio | 60 dB |
| Quiescent Current per Channel | 1 µA |
| Single-Supply Voltage Range | 2.7 V to 10 V |
| Nominal Single-Supply Voltage | 5 V |
| Dual-Supply Voltage Range | ±1.35 V to ±5 V |
| پیکیج | 14-SOIC, 3.90 mm body width |
| Total Pin Count | 14 pins |
TS974IYD 14-soic, 3.90 mm body width پن کنفیگریشن گائیڈ
TS974IYD (14-soic, 3.90 mm body width پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TS974IYD.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
TS974IYD کے لیے موزوں ہے 6 ایپلیکیشنs: Portable Audio Preamplification, Battery-Powered Sensor Conditioning, Low-Noise Active Filters, Low-Voltage Signal Buffers, Battery-Supplied Measurement Equipment, General-Purpose Analog Signal Processing.
Portable Audio Preamplification
The TS974IYD is well suited to portable audio preamplification because the STMicroelectronics TS97x family combines very low noise, low distortion, and rail-to-rail output swing. Its 12 MHz gain-bandwidth product gives each channel ample bandwidth for common audio signal paths, while the 1 µA quiescent current per channel helps limit consumption in battery-operated equipment. Four amplifiers in one 14-SOIC package can implement successive gain stages, buffers, or active filtering without requiring four separate packages. Confirm the output swing into the intended load and ensure that the input signal remains inside the amplifier's common-mode range.
تجویز کردہ
Battery-Powered Sensor Conditioning
The TS974IYD fits low-voltage sensor conditioning where low bias current and low standby consumption are important. Its 200 nA input bias current reduces loading on high-impedance sensors, while 1 µA quiescent current per channel supports battery life. The 60 dB common-mode rejection ratio helps reduce the effect of common-mode noise on differential measurements, and the 12 MHz bandwidth supports signals beyond static sensor outputs. Engineers should still verify input offset, noise density, common-mode limits, and the sensor's full-scale output against the complete STMicroelectronics electrical tables.
تجویز کردہ
Low-Noise Active Filters
The TS974IYD can implement multiple active-filter stages because it provides four general-purpose amplifiers in a 14-SOIC package. Its 12 MHz gain-bandwidth product and rail-to-rail output capability are useful for low-frequency filters with signal levels that benefit from reduced clipping near the supply rails. Very low noise and low distortion make the device relevant to audio and precision signal-conditioning networks. Component tolerances, gain-bandwidth behavior, output loading, and stability at the selected closed-loop gain should be evaluated before production. The 100 mA per-channel output-current listing also requires a load check.
تجویز کردہ
Low-Voltage Signal Buffers
The TS974IYD can provide voltage buffering when a sensor or divider produces a signal that must drive another circuit without additional loading. Rail-to-rail output swing increases usable signal range in compact 2.7 V to 10 V systems, and four channels allow several buffers to share one package. Low quiescent current of 1 µA per channel is valuable in portable equipment, while 12 MHz bandwidth supports responsive signal paths. Use unity-gain stability information, verify the capacitive-load limits, and keep feedback routing short so the buffer preserves signal integrity.
تجویز کردہ
Battery-Supplied Measurement Equipment
The TS974IYD suits portable measurement equipment that needs several low-power analog channels. A single 14-SOIC package provides four amplifiers for transducer conditioning, gain adjustment, filtering, and output buffering. The low 1 µA quiescent current per channel helps conserve battery capacity, while operation from 2.7 V to 10 V supports cells, regulated rails, and dual-supply circuits down to ±1.35 V. The 60 dB common-mode rejection ratio is valuable when long sensor leads or switching converters introduce common-mode disturbance. Validate offset voltage, noise, input range, and calibration drift for the required measurement accuracy.
تجویز کردہ
General-Purpose Analog Signal Processing
The TS974IYD is a practical quad-amplifier building block for general-purpose analog signal processing such as gain stages, comparators, integrators, and current-to-voltage converters. Its 12 MHz gain-bandwidth product supports a broad range of low-frequency and moderate-frequency tasks, while 200 nA input bias current reduces disturbance in high-impedance circuits. The 100 mA output current per channel provides headroom for conventional signal loads. Rail-to-rail output swing is advantageous in compact systems, but the designer must avoid relying on rail-to-rail input behavior unless it is explicitly confirmed in the complete electrical characteristics.
تجویز کردہ
کے لیے انجینئرنگ ریفرنس ڈیٹا TS974IYD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | TS974IDT |
|---|---|---|
| Package | 14-SOIC | 14-SOIC |
| Brand | STMicroelectronics | STMicroelectronics |
| Number of Channels | 4 circuits | 4 circuits |
| Gain-Bandwidth Product | 12 MHz | 12 MHz |
| Output Swing | Rail-to-rail | Rail-to-rail |
اہم امتیازی خصوصیات
- Four matching amplifiers in one compact package (بمقابلہTS974IDT)
- Low-power operation with useful signal bandwidth (بمقابلہTS974IDT)
- Rail-to-rail output in a low-voltage quad-amplifier package (بمقابلہTS974IDT)
ڈیزائن نوٹس
Confirm that the circuit's supply remains within the 2.7 V to 10 V single-supply range or the ±1.35 V to ±5 V dual-supply range. Place the supply bypass capacitor close to the power pins and use the package-specific layout and capacitance guidance in the STMicroelectronics datasheet. Account for rail-to-rail output behavior and headroom rather than assuming the amplifier can swing exactly to either supply rail.
Keep each op-amp's feedback components and input traces compact to minimize parasitic capacitance and susceptibility to interference. The TS974IYD contains four amplifiers in one package, so provide adequate spacing between adjacent channels when low-noise or high-impedance work is involved. Route the ground return directly to the device and avoid sharing narrow paths with high-current switching or output-load returns.
Do not assume that rail-to-rail output swing guarantees rail-to-rail input operation. Check input common-mode limits, output swing under the intended load, closed-loop gain stability, capacitive-load tolerance, and the 100 mA per-channel output-current figure against the actual circuit. Also verify the exact ordering grade when using TS974IDT as a substitute because the suffix can denote different device requirements.
تعمیل کی معلومات
The available manufacturer-family information does not state the required compliance classifications. Use the current STMicroelectronics product documentation and declaration of compliance for production release.