Nuvoton Technology Corporation

W78E052B40DL - 8-Bit 40MHz 8051 MCU | Nuvoton

MPN: W78E052B40DL ✓ فعال
40-DIP Package 40 MHz Speed Flash Memory
MOQ: 1 |

W78E052B40DL جائزہ

The Nuvoton Technology Corporation W78E052B40DL is an 8-bit 8051-compatible microcontroller operating at up to 40 MHz, with 8 KB of Flash program memory and 32 general-purpose I/O pins in a 40-pin DIP package. Its 256 x 8-bit RAM organization provides 256 bytes of internal data memory for variables, stack operations, and working buffers.

An 8051-compatible microcontroller is an embedded processing device built around the established 8051 instruction-set architecture and peripheral model. It belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors, combining a CPU core, program memory, data memory, I/O ports, timers, and serial-interface resources on one integrated circuit. The W78E052B40DL targets applications where an established 8051 software base is valuable.

The three principal resource figures are a 40 MHz operating speed, 8 KB of Flash program memory, and 32 I/O pins. Flash memory retains programmed firmware without power, while the 32 I/Os provide interfaces for sensors, switches, displays, communication signals, and control outputs. The through-hole 40-DIP format also supports conventional PCB assembly and prototype wiring rather than requiring a fine-pitch surface-mount process.

The device combines the familiar 8051 architecture with a faster clock and Flash-based code storage. Its 8K x 8 program organization provides 8192 addressable program-memory locations, while the 256 x 8 RAM organization provides 256 bytes of byte-addressable data storage. These figures determine the firmware and working-memory budget, so software architecture and buffer allocation should be checked against both limits during design planning.

Typical uses include compact embedded controllers, legacy 8051-compatible equipment, industrial interface modules, appliance-control boards, and educational prototyping systems. A design can connect external sensors and actuators through the 32 I/O pins, execute stored firmware from Flash, and use the internal RAM for control state. Final peripheral suitability should be confirmed from the manufacturer pin-description and electrical-characteristics tables.

The most important design step is to preserve the 40-DIP footprint and verify every signal against the manufacturer datasheet before layout. Confirm supply voltage, clock configuration, reset requirements, port direction, and peripheral availability for the specific firmware plan. For brownout, timing, or environmental requirements not stated by the product listing, perform those checks against the manufacturer datasheet rather than inferring them from the 8051 family name.

This page combines the verified 8-bit architecture, 40 MHz speed, 8 KB Flash memory, 256-byte RAM, 32 I/O pins, and 40-DIP package details with practical comparison, sourcing, and design guidance. It is intended to help engineers identify the correct MCU and determine whether an existing 8051 design can be implemented without changing its controller footprint.

کے لیے ڈراپ اِن متبادل W78E052B40DL — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں W78E052B40DL (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Number of I/O Pins, Package, Program Memory Size, RAM Size.

Nuvoton Technology Corporation
Number of I/O Pins: 36 pins
Package: 40-pin DIP
Program Memory Size: 32 KB (32K × 8 bits) flash
موازنہ کریں W78E052B40DL →

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

W78E052B40DL زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Processor Architecture 8051-compatible 8-bit microcontroller
زیادہ سے زیادہ کلاک فریکوئنسی 40 MHz
Program Memory Type Flash
Program Memory Size 8 KB
Program Memory Organization 8K x 8 bits
RAM Size 256 x 8 bits (256 bytes)
Number of I/O Pins 32
پیکیج 40-DIP

W78E052B40DL 40-dip پن کنفیگریشن گائیڈ

W78E052B40DL (40-dip پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

W78E052B40DL کے لیے 40-dip پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں W78E052B40DL.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

W78E052B40DL کے لیے موزوں ہے 6 ایپلیکیشنs: Legacy 8051 Embedded Control, Appliance Control Board, Industrial Interface Module, Educational 8051 Prototyping, Digital Control and Sequencer, Equipment Upgrade with Existing 8051 Firmware.

🔧

Legacy 8051 Embedded Control

The W78E052B40DL fits legacy 8051 embedded-control work where an established instruction set and a 40-DIP controller footprint must be retained. Its 8-bit 8051-compatible core runs at up to 40 MHz, while 8 KB of Flash stores application firmware and 256 bytes of RAM provide working state. The 32 I/O pins support digital inputs, outputs, status indicators, and discrete control signals. This combination makes the device practical for compact equipment controllers and products whose existing firmware, board layout, and service process are based on the 8051 architecture. Designers should treat the 8K x 8 Flash and 256 x 8 RAM organizations as fixed firmware-budget constraints.

🏭

Appliance Control Board

The W78E052B40DL is appropriate for appliance-control boards that coordinate switches, sensors, relays, indicators, and simple sequencing logic. Its 32 I/O pins provide a substantial digital interface for reading controls and driving discrete peripherals, while the 40 MHz clock supports responsive state-machine execution. Firmware can reside in 8 KB of nonvolatile Flash, and 256 bytes of RAM can hold flags, counters, and temporary values. The 40-DIP package is particularly useful for through-hole assembly in cost-sensitive controller layouts. Final board planning should verify each port's electrical limits and the availability of required timer or serial functions in the manufacturer datasheet.

⚡

Industrial Interface Module

The W78E052B40DL can serve as the controller in a small industrial interface module that translates digital field signals into a manageable embedded system. Its 32 I/O pins allow connection of limit switches, status inputs, alarm outputs, and control outputs, while the 8051-compatible core supports established industrial-control software. The 40 MHz operating speed helps maintain deterministic control loops, and the 8 KB Flash capacity is suitable for compact supervisory logic. The 40-DIP outline simplifies through-hole assembly and repair in equipment where rework access and long service life matter. Confirm electrical isolation, surge requirements, environmental limits, and communication resources separately for each industrial installation.

🧩

Educational 8051 Prototyping

The W78E052B40DL provides a straightforward platform for learning 8051 architecture, embedded C programming, port control, and timing-based logic. Its 40 MHz clock provides ample speed for introductory exercises and moderate real-time control experiments, while 8 KB of Flash can hold demonstration firmware. The 32 I/O pins give students access to LEDs, switches, buttons, and basic sensor inputs without requiring a highly complex board. Its 40-DIP package is easy to mount on a solderless board or through-hole prototype PCB. Instruction sequences and register-level exercises should still target the exact W78E052B40DL peripheral configuration documented by the manufacturer.

🔧

Digital Control and Sequencer

The W78E052B40DL is well suited to digital sequencing tasks in which a fast 8-bit controller reads multiple discrete conditions and updates outputs according to a defined state machine. Thirty-two I/O lines reduce the need for external logic in moderately interconnected control systems. The 8 KB Flash area stores the sequencing program, and the 40 MHz clock allows frequent polling and rapid transitions between operating states. Its 256-byte RAM should be budgeted carefully when several buffers or counters are active. Use the manufacturer pin-description and electrical tables to determine whether the required port count and functions remain available after power, reset, and communication signals are allocated.

🖥️

Equipment Upgrade with Existing 8051 Firmware

The W78E052B40DL supports equipment upgrades that must preserve an existing 8051 firmware model and 40-DIP controller pattern. Its 8-bit 8051-compatible architecture reduces software migration risk, while 40 MHz operation provides additional timing headroom compared with many older 8-bit controllers. The 8 KB Flash and 256-byte RAM capacities must be checked against the current executable and data requirements before replacing the original device. A pin-by-pin comparison is essential because adjacent signals may include reset, oscillator, programming, power, or multiplexed peripheral functions. Once those assignments are confirmed, the replacement can be evaluated as a board-level component substitution rather than a redesign.

What is the W78E052B40DL?
The W78E052B40DL is an 8-bit 8051-compatible Flash microcontroller from Nuvoton Technology Corporation with a 40 MHz clock, 8 KB of program memory, 256 bytes of RAM, and 32 I/O pins. According to the manufacturer product documentation, it is packaged in a 40-DIP format. These resources make it appropriate for embedded controllers and products that retain an established 8051 software ecosystem.
What are the key specifications of W78E052B40DL?
The key W78E052B40DL specifications are a 40 MHz maximum clock, 8-bit 8051-compatible architecture, 8 KB of Flash program memory, 256 x 8 bits of RAM, 32 I/O pins, and a 40-DIP package. According to the manufacturer datasheet, program memory is organized as 8K x 8, while RAM is organized as 256 x 8. Designers should check the full electrical and pin tables before assigning a new board.
Where can I download the W78E052B40DL datasheet PDF?
The W78E052B40DL datasheet PDF can be accessed through the Octopart datasheet link on this page. The manufacturer datasheet is the authoritative source for pin names, electrical limits, timing, memory organization, oscillator options, and electrical characteristics. The part listing identifies 8 KB of Flash program memory and 256 x 8 bits of RAM; verify all remaining implementation details against the linked manufacturer documentation.
Where is the W78E052B40DL pinout?
The W78E052B40DL pinout is documented in the pin-description table of the manufacturer datasheet for the 40-DIP package. The device has 32 I/O pins in a 40-pin package, but the complete signal assignment is not reproduced on this page. Before routing a PCB, assign every pin from the datasheet and preserve the standard 40-DIP footprint, including pin-1 orientation and adequate board clearances.
What can replace the W78E052B40DL?
No drop-in replacement for the W78E052B40DL has been verified. A true replacement must preserve the 40-DIP footprint, pin-to-pin behavior, 8-bit 8051-compatible software environment, 40 MHz clock capability, 8 KB Flash organization, 256-byte RAM capacity, and 32 available I/Os. Use the Request a Quote form to discuss sourcing the original MPN rather than assuming a functionally similar MCU is pin-compatible.
Is W78E052B40DL the same as W78E058DDG?
The W78E052B40DL and W78E058DDG must not be assumed to be the same or drop-in compatible. The former is identified as a 40 MHz, 8 KB Flash, 40-DIP device, while the comparison material does not establish the latter's package, pinout, memory, or peripheral compatibility. According to the manufacturer datasheet approach for final design decisions, verify package drawing and every assigned signal before substitution.
What is the best Microchip equivalent for W78E052B40DL?
No Microchip cross-brand equivalent has been verified as a drop-in replacement for the W78E052B40DL. Compatibility would require the same 40-DIP footprint, equivalent pin assignments, 8051-compatible code generation, at least 8 KB of Flash, at least 256 bytes of RAM, 32 I/Os, and support for a 40 MHz operating condition. A functionally equivalent 8051 controller in another package requires PCB redesign.
W78E052B40DL vs W78E058DDG - which is better for an embedded controller?
The W78E052B40DL is the better-supported choice for a design fixed on the 40-DIP footprint because it is specifically identified as a 40 MHz, 8 KB Flash MCU with 32 I/Os in that package. The W78E058DDG cannot be ranked as a drop-in alternative until its package and pin assignments are confirmed. According to the manufacturer datasheet, final suitability depends on the complete electrical and mechanical interface.
When should I choose W78E052B40DL over another 8051 MCU?
Choose the W78E052B40DL when an existing design requires a 40-pin DIP footprint, an 8-bit 8051-compatible core, 8 KB of Flash, 256 bytes of RAM, 32 I/Os, and operation at up to 40 MHz. Its exact part designation makes procurement and software targeting straightforward. Select another controller instead when a different package, larger memory, integrated analog function, or another certified device family is required.
Is W78E052B40DL suitable for a legacy 8051 control board?
The W78E052B40DL is suitable for a legacy 8051 control board when its 40-DIP footprint and pin assignments match the original circuit and its resources cover the application. It provides an 8-bit 8051-compatible core, 40 MHz operation, 8 KB Flash, 256 bytes of RAM, and 32 I/Os. According to the manufacturer datasheet, confirm reset, clock, supply, port, and peripheral requirements before production use.
Where to buy W78E052B40DL online?
Use the Request a Quote form on this page to request W78E052B40DL sourcing, current commercial availability, and order handling. The product is listed as an 8-bit, 40 MHz, 8 KB Flash 8051-compatible microcontroller in a 40-DIP package. The form lets the purchasing team confirm the exact suffix, quantity, delivery requirements, and lifecycle status for the current order.
What is the price of W78E052B40DL?
Use the Request a Quote form on this page for the current W78E052B40DL price and quantity schedule. The verified product information identifies the exact controller as a 40 MHz, 8 KB Flash, 32-I/O, 40-DIP MCU, but it does not contain an explicit quantity-break price table. The quote form can provide current pricing without presenting stale prices or mixing variants that have different suffixes or packages.
What is the lead time for W78E052B40DL?
The current lead time for W78E052B40DL should be confirmed through the Request a Quote form on this page. Lead time depends on stock position, requested quantity, exact manufacturer suffix, and delivery destination. The product listing confirms the controller identity and package, while the manufacturer datasheet defines the technical configuration; neither listing alone establishes a live production allocation for a specific order.
Is W78E052B40DL in stock?
Current W78E052B40DL stock status should be requested through the Request a Quote form on this page. The part is listed for sourcing as a 40 MHz, 8 KB Flash, 40-DIP 8051-compatible microcontroller, but inventory can change independently of technical documentation. Provide the required quantity, target date, and shipping destination so the order can be checked against the exact W78E052B40DL MPN.
What design constraints should engineers check for W78E052B40DL?
Engineers should check the 40-DIP footprint, 32 I/O assignments, 8 KB Flash budget, 256-byte RAM budget, 40 MHz clock requirement, supply voltage, reset path, and peripheral availability. According to the manufacturer datasheet, these details govern implementation. Because several electrical and environmental limits are not stated in the product listing, treat the datasheet as the controlling document before schematic capture or PCB release.

کے لیے انجینئرنگ ریفرنس ڈیٹا W78E052B40DL — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the W78E052B40DL when the controller footprint is fixed at 40-DIP and the design benefits from a 40 MHz 8-bit 8051-compatible core. It is particularly suitable for compact legacy controllers, appliance-control boards, small industrial interfaces, and prototypes that need 8 KB of Flash, 256 bytes of RAM, and 32 I/O pins. The part is less attractive when the application requires more RAM or program storage, a different package, or a broader peripheral set. No drop-in substitute has been verified, so do not substitute a merely similar 8051 device without a complete package, pin, electrical, and software review. For a design with an existing 40-DIP layout and compatible firmware, the exact W78E052B40DL remains the lowest-risk choice among the identified components.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Nuvoton Technology Corporation
Package 40-DIP
Processor Architecture 8051-compatible 8-bit microcontroller
Maximum Clock Frequency 40 MHz
Program Memory Type Flash
Program Memory Size 8 KB (8K x 8)
RAM Size 256 x 8 bits (256 bytes)
Number of I/O Pins 32

اہم امتیازی خصوصیات

  • Combines a 40 MHz clock with an established 8-bit 8051-compatible architecture (بمقابلہNo verified drop-in alternative)
  • Offers 32 I/O pins in a 40-DIP controller package (بمقابلہNo verified drop-in alternative)
  • Combines 8 KB Flash storage with 256 bytes of RAM (بمقابلہNo verified drop-in alternative)

ڈیزائن نوٹس

Confirm the 40-DIP mechanical drawing, row spacing, pin-1 orientation, and keepout before committing the PCB. The 32 I/O pins are not the only package connections because a 40-pin DIP also uses additional power, reset, clock, and other device signals. Assign each physical pin from the manufacturer pin-description table rather than assuming a generic 8051 footprint. Preserve adequate spacing around the socket or solder joints for assembly, inspection, and field replacement.

Do not treat an 8051-compatible label as permission to reuse an arbitrary previous schematic. The 40 MHz clock capability, 8 KB Flash organization, 256-byte RAM capacity, 32 I/Os, and package assignment must all be checked. In particular, verify which port bits are dedicated to reset, oscillator, programming, or other functions. Compile the firmware against the exact peripheral and memory map, then compare every external net with the target board before substitution.

Calculate the supply and decoupling requirements from the manufacturer electrical-characteristics table before finalizing the power circuit. The verified product listing establishes the 40 MHz Flash microcontroller identity but does not state the operating-voltage range or absolute maximum ratings, so those limits must not be inferred from other W78 devices. Check clock startup behavior, port drive capability, and required bypass capacitance, then include adequate local decoupling at the device supply pins.

Budget firmware and runtime memory explicitly because the device has only 8 KB of Flash and 256 bytes of RAM. Reserve Flash space for interrupt vectors, bootloader logic if applicable, constants, and application code; account for stack depth, volatile variables, buffers, and communication state in RAM. Review the linker map and stack usage during firmware integration. This prevents code-size overflow and reduces the risk of a reset caused by excessive call depth or buffer allocation.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The verified product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements from the manufacturer documentation before regulatory submission or application release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-11 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

W78E052B40DL W78E052B40DL datasheet W78E052B40DL datasheet pdf W78E052B40DL pinout W78E052B40DL footprint W78E052B40DL specifications W78E052B40DL equivalent W78E052B40DL replacement W78E052B40DL price W78E052B40DL stock Nuvoton W78E052B40DL W78E052B40DL 40MHz 8051

متعلقہ اجزاء اور اصطلاحات

Nuvoton Technology Corporation W78E052B40DL 8051-compatible microcontroller 8-bit microcontroller embedded processor microcontroller semiconductor Flash program memory 8 KB Flash 8K x 8 memory organization 256 x 8 RAM 256 bytes RAM 40 MHz clock 32 I/O pins 40-DIP package through-hole package legacy control board appliance controller industrial interface module embedded system firmware program memory data memory
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں