Z86E2116PSC - 8-Bit 16MHz OTP Microcontroller | Zilog
MPN: Z86E2116PSC ✗ اختتامِ زندگیZ86E2116PSC جائزہ
A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripheral functions on one device. The Z86E2116PSC belongs to the Z8 family and operates as an embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Its one-time-programmable architecture is intended for products where firmware is finalized during manufacturing and field programming is unnecessary.
The principal features include an 8-bit CPU operating at 12 MHz or 16 MHz, 8 KB of ROM or program memory, 236 bytes of RAM, 32 I/O pins, two 8-bit timer/counter blocks, and UART communications. These resources allow a designer to combine serial data handling, timed control functions, and discrete digital input and output within one integrated circuit.
The Z86E2116PSC is identified as a CMOS Z8 OTP microcontroller. Its 40-DIP construction supports conventional through-hole PCB assembly and prototyping, while the 0°C to 70°C operating range places it in the commercial temperature class. The 236-byte RAM and 32 available I/O lines provide practical working space for compact appliance controls, industrial automation equipment, and embedded peripheral controllers.
Typical uses include keypad and user-interface controllers, small motor-control boards, instrumentation peripherals, serial interface adapters, and simple industrial automation modules. The UART is particularly useful for connecting the controller to sensors, displays, data converters, or host systems, while the two timers support periodic measurement, timing, and output-control tasks.
PCB design should follow the manufacturer's 40-pin pin-description table and recommended decoupling guidance. Because the program memory is one-time programmable, firmware validation and device programming must be completed before the MCU enters the finished assembly. Prototype builds should also account for the through-hole footprint and commercial temperature limits rather than treating it as a modern fine-pitch surface-mount design.
This page combines the verified device identity, package information, memory configuration, timing characteristics, and interface details with practical application guidance. It also separates confirmed specifications from missing electrical and pin-level parameters so engineers can obtain the manufacturer datasheet before finalizing a high-voltage, timing-critical, or production-programming design.
کے لیے ڈراپ اِن متبادل Z86E2116PSC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں Z86E2116PSC (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Maximum Clock Frequency, Program Memory Organization, Program Memory Type.
Z86E2116PEC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
Z86E2114PSC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
Z86E2115PSC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
Z86E2112PSC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →Z86E2117PSC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
Z86E2116PSC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | 8-bit CMOS microcontroller |
| Architecture | Z8 core |
| زیادہ سے زیادہ کلاک فریکوئنسی | 16 MHz |
| Available Clock Speeds | 12 MHz, 16 MHz |
| Program Memory | 8 KB |
| Program Memory Organization | 8K x 8 |
| Program Memory Type | One-time programmable |
| RAM | 236 bytes |
| I/O Lines | 32 |
| Timers | 2 x 8-bit |
| Communication Interface | UART |
| پیکیج | 40-DIP |
| ماؤنٹنگ ٹائپ | Through-hole |
| آپریٹنگ درجہ حرارت | 0°C to +70°C |
| Process Technology | CMOS |
Z86E2116PSC 40-dip پن کنفیگریشن گائیڈ
Z86E2116PSC (40-dip پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں Z86E2116PSC.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
Z86E2116PSC کے لیے موزوں ہے 6 ایپلیکیشنs: Small Industrial Automation Controller, UART-Based Serial Interface Adapter, Keypad and User-Interface Controller, Simple Motor and Timing Control, Instrumentation Data-Acquisition Front End, Appliance and Embedded Peripheral Control.
Small Industrial Automation Controller
The Z86E2116PSC fits a compact automation controller because its 8-bit Z8 core, 32 I/O lines, and two 8-bit timers can operate sensors, discrete actuators, and periodic control functions from one device. The UART can connect the controller to a host, operator interface, or remote supervisory system. Its confirmed 0°C to +70°C range suits commercial industrial environments, but the obsolete lifecycle status requires stock and longevity confirmation before production use.
تجویز کردہ
UART-Based Serial Interface Adapter
The Z86E2116PSC can serve as a dedicated serial interface adapter when a product needs one UART and several digital control lines rather than a large processor. Its 16 MHz maximum clock supports responsive protocol handling, while 236 bytes of RAM accommodates packet buffers and state variables. The 32 I/O lines can also carry modem-control signals or discrete status indicators, making the OTP architecture suitable for production-programmed equipment.
تجویز کردہ
Keypad and User-Interface Controller
The Z86E2116PSC is appropriate for a keypad or compact user-interface module because the 32 I/O lines can scan switches and drive indicators while the two timers support debouncing and periodic display updates. The 8 KB OTP program area can hold the complete user-interface routine, and the UART allows a main controller to receive commands or status. Firmware must be fully tested before OTP programming because field updates are not available.
تجویز کردہ
Simple Motor and Timing Control
The two 8-bit timers in the Z86E2116PSC can support basic timing, counting, pulse generation, and periodic service tasks in a small motor or actuator controller. Its 32 I/O lines provide interface capacity for sensors, limit switches, drivers, and status lamps. Because the OTP program is permanent, deploy the device only after validating timing behavior and using conservative outputs with suitable protection for inductive or noisy loads.
تجویز کردہ
Instrumentation Data-Acquisition Front End
The Z86E2116PSC can collect discrete sensor inputs, perform timing and counting operations, and forward summarized measurements through its UART. Its 16 MHz Z8 core provides sufficient throughput for compact instrumentation that does not require high-resolution conversion or intensive signal processing. The 236-byte RAM supports short acquisition and buffering tasks, while the two timers can establish sampling intervals and timeout behavior for reliable data transfer.
تجویز کردہ
Appliance and Embedded Peripheral Control
The Z86E2116PSC offers enough program memory, RAM, timers, UART capability, and I/O for appliance subcontrollers that coordinate buttons, indicators, sensors, and communication links. Its through-hole 40-DIP package is convenient for legacy-style control boards and straightforward prototyping. The commercial 0°C to +70°C range and OTP architecture fit mass-produced products, although obsolete lifecycle status makes procurement continuity a central design constraint.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا Z86E2116PSC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Brand | Zilog |
| Package | 40-DIP |
| Mounting Type | Through-hole |
| Architecture | Z8 8-bit core |
| Maximum Clock Frequency | 16 MHz |
| Program Memory | 8 KB OTP |
| RAM | 236 bytes |
| I/O Lines | 32 |
| Timers | 2 x 8-bit |
| Communication Interface | UART |
| Operating Temperature | 0°C to +70°C |
| Lifecycle Status | Obsolete |
اہم امتیازی خصوصیات
- Z8-specific 8-bit embedded-control architecture (بمقابلہNo verified drop-in alternative)
- Integrated legacy peripheral set (بمقابلہNo verified drop-in alternative)
- Permanent OTP programming model (بمقابلہModern flash-based microcontrollers)
ڈیزائن نوٹس
Treat program development, validation, and production programming as a single controlled process. The 8 KB program memory is one-time programmable, so a firmware defect cannot be corrected by rewriting the MCU. Use a known-good development setup, compare programmed contents against the released firmware image, and define a manufacturer-supported programming and marking procedure before committing devices to a production line.
Design the PCB from the manufacturer's 40-pin DIP land pattern and pin-description table rather than from the package drawing alone. Preserve the through-hole lead spacing and pin-1 orientation, then verify every power, ground, oscillator, reset, I/O, timer, and UART connection against the datasheet. The confirmed summaries do not specify individual pin assignments, so an inferred 40-pin layout should not be released for fabrication.
Confirm the allowed supply-voltage range, absolute maximum ratings, input thresholds, output-drive capability, and current consumption before connecting external signals. The 16 MHz clock and 32 I/O lines do not establish the electrical limits of the device. Apply the manufacturer input thresholds when checking sensor compatibility and ensure any external interface cannot exceed the confirmed or verified logic voltage limits.
Place the required clock and bypass components close to their associated device pins according to the Zilog layout guidance. Keep the 40-DIP footprint accessible for programming and inspection, and route sensitive or long external connections away from the oscillator and switching nodes. If the UART connects to a cable or isolated environment, include the appropriate protection network rather than relying on the microcontroller's I/O pins alone.
تعمیل کی معلومات
No explicit compliance declarations were established for this legacy Zilog device. The commercial 0°C to +70°C operating range does not by itself indicate AEC-Q100 qualification.