W78E052B40DL - 8-Bit 40MHz 8051 MCU | Nuvoton
料号: W78E052B40DL ✓ 量产中W78E052B40DL 概述
An 8051-compatible microcontroller is an embedded processing device built around the established 8051 instruction-set architecture and peripheral model. It belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors, combining a CPU core, program memory, data memory, I/O ports, timers, and serial-interface resources on one integrated circuit. The W78E052B40DL targets applications where an established 8051 software base is valuable.
The three principal resource figures are a 40 MHz operating speed, 8 KB of Flash program memory, and 32 I/O pins. Flash memory retains programmed firmware without power, while the 32 I/Os provide interfaces for sensors, switches, displays, communication signals, and control outputs. The through-hole 40-DIP format also supports conventional PCB assembly and prototype wiring rather than requiring a fine-pitch surface-mount process.
The device combines the familiar 8051 architecture with a faster clock and Flash-based code storage. Its 8K x 8 program organization provides 8192 addressable program-memory locations, while the 256 x 8 RAM organization provides 256 bytes of byte-addressable data storage. These figures determine the firmware and working-memory budget, so software architecture and buffer allocation should be checked against both limits during design planning.
Typical uses include compact embedded controllers, legacy 8051-compatible equipment, industrial interface modules, appliance-control boards, and educational prototyping systems. A design can connect external sensors and actuators through the 32 I/O pins, execute stored firmware from Flash, and use the internal RAM for control state. Final peripheral suitability should be confirmed from the manufacturer pin-description and electrical-characteristics tables.
The most important design step is to preserve the 40-DIP footprint and verify every signal against the manufacturer datasheet before layout. Confirm supply voltage, clock configuration, reset requirements, port direction, and peripheral availability for the specific firmware plan. For brownout, timing, or environmental requirements not stated by the product listing, perform those checks against the manufacturer datasheet rather than inferring them from the 8051 family name.
This page combines the verified 8-bit architecture, 40 MHz speed, 8 KB Flash memory, 256-byte RAM, 32 I/O pins, and 40-DIP package details with practical comparison, sourcing, and design guidance. It is intended to help engineers identify the correct MCU and determine whether an existing 8051 design can be implemented without changing its controller footprint.
直接替换替代料: W78E052B40DL ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: W78E052B40DL (相同外形与封装尺寸) ——差异在于 Number of I/O Pins, Package, Program Memory Size, RAM Size.
该产品暂无直接替换替代料。
请求替代料W78E052B40DL 最大额定值与电气特性
| Processor Architecture | 8051-compatible 8-bit microcontroller |
| 最大时钟频率 | 40 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 8 KB |
| Program Memory Organization | 8K x 8 bits |
| RAM Size | 256 x 8 bits (256 bytes) |
| Number of I/O Pins | 32 |
| 封装 | 40-DIP |
W78E052B40DL 40-dip 引脚配置指南
W78E052B40DL(40-dip 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: W78E052B40DL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
W78E052B40DL 适用于 6 应用s: Legacy 8051 Embedded Control, Appliance Control Board, Industrial Interface Module, Educational 8051 Prototyping, Digital Control and Sequencer, Equipment Upgrade with Existing 8051 Firmware.
Legacy 8051 Embedded Control
The W78E052B40DL fits legacy 8051 embedded-control work where an established instruction set and a 40-DIP controller footprint must be retained. Its 8-bit 8051-compatible core runs at up to 40 MHz, while 8 KB of Flash stores application firmware and 256 bytes of RAM provide working state. The 32 I/O pins support digital inputs, outputs, status indicators, and discrete control signals. This combination makes the device practical for compact equipment controllers and products whose existing firmware, board layout, and service process are based on the 8051 architecture. Designers should treat the 8K x 8 Flash and 256 x 8 RAM organizations as fixed firmware-budget constraints.
Appliance Control Board
The W78E052B40DL is appropriate for appliance-control boards that coordinate switches, sensors, relays, indicators, and simple sequencing logic. Its 32 I/O pins provide a substantial digital interface for reading controls and driving discrete peripherals, while the 40 MHz clock supports responsive state-machine execution. Firmware can reside in 8 KB of nonvolatile Flash, and 256 bytes of RAM can hold flags, counters, and temporary values. The 40-DIP package is particularly useful for through-hole assembly in cost-sensitive controller layouts. Final board planning should verify each port's electrical limits and the availability of required timer or serial functions in the manufacturer datasheet.
Industrial Interface Module
The W78E052B40DL can serve as the controller in a small industrial interface module that translates digital field signals into a manageable embedded system. Its 32 I/O pins allow connection of limit switches, status inputs, alarm outputs, and control outputs, while the 8051-compatible core supports established industrial-control software. The 40 MHz operating speed helps maintain deterministic control loops, and the 8 KB Flash capacity is suitable for compact supervisory logic. The 40-DIP outline simplifies through-hole assembly and repair in equipment where rework access and long service life matter. Confirm electrical isolation, surge requirements, environmental limits, and communication resources separately for each industrial installation.
Educational 8051 Prototyping
The W78E052B40DL provides a straightforward platform for learning 8051 architecture, embedded C programming, port control, and timing-based logic. Its 40 MHz clock provides ample speed for introductory exercises and moderate real-time control experiments, while 8 KB of Flash can hold demonstration firmware. The 32 I/O pins give students access to LEDs, switches, buttons, and basic sensor inputs without requiring a highly complex board. Its 40-DIP package is easy to mount on a solderless board or through-hole prototype PCB. Instruction sequences and register-level exercises should still target the exact W78E052B40DL peripheral configuration documented by the manufacturer.
Digital Control and Sequencer
The W78E052B40DL is well suited to digital sequencing tasks in which a fast 8-bit controller reads multiple discrete conditions and updates outputs according to a defined state machine. Thirty-two I/O lines reduce the need for external logic in moderately interconnected control systems. The 8 KB Flash area stores the sequencing program, and the 40 MHz clock allows frequent polling and rapid transitions between operating states. Its 256-byte RAM should be budgeted carefully when several buffers or counters are active. Use the manufacturer pin-description and electrical tables to determine whether the required port count and functions remain available after power, reset, and communication signals are allocated.
Equipment Upgrade with Existing 8051 Firmware
The W78E052B40DL supports equipment upgrades that must preserve an existing 8051 firmware model and 40-DIP controller pattern. Its 8-bit 8051-compatible architecture reduces software migration risk, while 40 MHz operation provides additional timing headroom compared with many older 8-bit controllers. The 8 KB Flash and 256-byte RAM capacities must be checked against the current executable and data requirements before replacing the original device. A pin-by-pin comparison is essential because adjacent signals may include reset, oscillator, programming, power, or multiplexed peripheral functions. Once those assignments are confirmed, the replacement can be evaluated as a board-level component substitution rather than a redesign.
工程参考数据: W78E052B40DL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Nuvoton Technology Corporation |
| Package | 40-DIP |
| Processor Architecture | 8051-compatible 8-bit microcontroller |
| Maximum Clock Frequency | 40 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 8 KB (8K x 8) |
| RAM Size | 256 x 8 bits (256 bytes) |
| Number of I/O Pins | 32 |
关键差异点
- Combines a 40 MHz clock with an established 8-bit 8051-compatible architecture (对比 No verified drop-in alternative)
- Offers 32 I/O pins in a 40-DIP controller package (对比 No verified drop-in alternative)
- Combines 8 KB Flash storage with 256 bytes of RAM (对比 No verified drop-in alternative)
设计说明
Confirm the 40-DIP mechanical drawing, row spacing, pin-1 orientation, and keepout before committing the PCB. The 32 I/O pins are not the only package connections because a 40-pin DIP also uses additional power, reset, clock, and other device signals. Assign each physical pin from the manufacturer pin-description table rather than assuming a generic 8051 footprint. Preserve adequate spacing around the socket or solder joints for assembly, inspection, and field replacement.
Do not treat an 8051-compatible label as permission to reuse an arbitrary previous schematic. The 40 MHz clock capability, 8 KB Flash organization, 256-byte RAM capacity, 32 I/Os, and package assignment must all be checked. In particular, verify which port bits are dedicated to reset, oscillator, programming, or other functions. Compile the firmware against the exact peripheral and memory map, then compare every external net with the target board before substitution.
Calculate the supply and decoupling requirements from the manufacturer electrical-characteristics table before finalizing the power circuit. The verified product listing establishes the 40 MHz Flash microcontroller identity but does not state the operating-voltage range or absolute maximum ratings, so those limits must not be inferred from other W78 devices. Check clock startup behavior, port drive capability, and required bypass capacitance, then include adequate local decoupling at the device supply pins.
Budget firmware and runtime memory explicitly because the device has only 8 KB of Flash and 256 bytes of RAM. Reserve Flash space for interrupt vectors, bootloader logic if applicable, constants, and application code; account for stack depth, volatile variables, buffers, and communication state in RAM. Review the linker map and stack usage during firmware integration. This prevents code-size overflow and reduces the risk of a reset caused by excessive call depth or buffer allocation.
合规信息
The verified product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements from the manufacturer documentation before regulatory submission or application release.