XC6SLX45-N3FGG676C - 43,661-Cell Spartan-6 FPGA | AMD
MPN: XC6SLX45-N3FGG676C ✓ فعالXC6SLX45-N3FGG676C جائزہ
An FPGA is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. The FPGA hierarchy places this device within programmable logic devices, above CPLDs, and alongside ASICs as a programmable implementation option. Spartan-6 LX devices target cost-sensitive systems requiring substantially more logic capacity and parallel signal-processing resources than a conventional CPLD while retaining field programmability and reusable hardware platforms.
The XC6SLX45 provides 43,661 logic cells organized into 3,411 logic blocks and includes 358 user I/O pins. Its 2,138,112 RAM bits provide on-chip storage for buffering, packet handling, data acquisition, and general-purpose digital processing. The 45 nm CMOS process and 1.2 V supply architecture place the device in AMD's mid-density Spartan-6 LX range. The -N3FGG676C ordering code identifies the specific Spartan-6 LX density, speed, temperature, package, and commercial qualification combination.
The 676-ball FBGA package provides a dense board interface suited to multilayer printed circuit boards and high-pin-count system architectures. Its fine-pitch ball array requires careful escape routing, power-plane distribution, and via-in-pad or via-adjacent decoupling strategies. Because this package has no exposed thermal pad specified in the product description, designers should use the package-specific thermal and layout guidance in the AMD Spartan-6 documentation before finalizing copper allocation.
Typical applications include industrial control, communications infrastructure, instrumentation, test and measurement, embedded signal processing, video processing, and high-volume embedded systems. The large logic and RAM resources make the XC6SLX45 suitable for parallel data acquisition, protocol conversion, motor and motion control, and custom accelerator implementations. Software-defined control, status monitoring, and high-speed serial interfaces can be consolidated into one device, reducing board count when firmware updates are acceptable.
For a new PCB, preserve the 676-ball footprint, follow the AMD recommended pinout, and verify every power rail against the selected configuration. Programming configuration pins, dedicated configuration resources, bank-supply requirements, and voltage thresholds must be checked against the Spartan-6 configuration and pinout documentation. Existing XC6SLX45 boards may require bitstream and design-tool compatibility review even when the PCB footprint is retained.
This product page combines the verified device identity, package and resource details with practical guidance for power integrity, configuration, thermal management, and drop-in family assessment. The alternatives listed here are limited to same-footprint Spartan-6 LX candidates because FPGA interchangeability depends on more than nominal package size: speed grade, temperature grade, configuration compatibility, pinout, and design-tool support must all match the target system requirements.
کے لیے ڈراپ اِن متبادل XC6SLX45-N3FGG676C — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC6SLX45-N3FGG676C (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Device Type, Operating Temperature, Speed Grade, Logic Cells.
XC6SLX45-2FGG676C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC6SLX45-3FGG676C
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC6SLX45-N3FGG676I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC6SLX45-2FGG676I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC6SLX45-3FGG676I
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC6SLX45-N3FGG676C زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Spartan-6 LX field-programmable gate array (FPGA) |
| Logic Cells | 43,661 cells |
| Logic Blocks | 3,411 blocks |
| User I/O Pins | 358 pins |
| Block RAM | 2,138,112 bits |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Operating Supply Range | 1.14 V to 1.26 V |
| پیکیج | 676-ball FBGA |
| Package Ball Count | 676 balls |
| Device Family | Spartan-6 LX |
| Programmable Logic | FPGA |
| RoHS اسٹیٹس | Compliant |
| Lead-Free Construction | Yes |
XC6SLX45-N3FGG676C 676 balls پن کنفیگریشن گائیڈ
XC6SLX45-N3FGG676C (676 balls پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC6SLX45-N3FGG676C.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC6SLX45-N3FGG676C کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control and Automation, Communications and Network Interface, Data Acquisition and Instrumentation, Video and Image Processing, Embedded Signal Processing, High-Performance Embedded Systems.
Industrial Control and Automation
The XC6SLX45-N3FGG676C fits industrial controllers that require substantial parallel logic and extensive I/O in a single device. Its 43,661 logic cells can implement sequencing, state machines, machine interfaces, and supervisory logic, while 3,411 logic blocks provide the physical implementation capacity for those functions. The 358 user I/O pins can support digital sensors, actuators, encoders, and inter-device buses when configured for the appropriate voltage standards. A 676-ball FBGA also supports dense multilayer routing, although careful decoupling and plane allocation remain essential. Before using the part across the full industrial temperature range, verify the exact ordering-code temperature limits and design the power system for every configured I/O bank.
تجویز کردہ
Communications and Network Interface
The XC6SLX45-N3FGG676C is suitable for protocol converters, network-interface controllers, and packet-processing modules where parallel logic and on-chip RAM are more important than a small package. The device's 2,138,112 RAM bits can support FIFO buffers, packet descriptors, and intermediate data paths, while 43,661 logic cells provide capacity for framing, header processing, and interface state machines. Its 358 user I/O pins allow multiple parallel interfaces to be consolidated without requiring several supporting devices. Clocking, I/O voltage standards, and high-speed interface constraints must be evaluated against the exact speed grade and selected I/O resources. A family alternative remains usable only if its timing and qualification requirements preserve the original design margin.
تجویز کردہ
Data Acquisition and Instrumentation
The XC6SLX45-N3FGG676C can consolidate parallel data acquisition, digital filtering, calibration, and data-transfer logic in one Spartan-6 LX FPGA. Its 43,661 logic cells and 3,411 logic blocks provide substantial parallelism for sampling pipelines and test-sequence control, while 2,138,112 RAM bits allow local buffering before results are transferred. The 358 user I/O pins can connect ADC outputs, digital sensors, capture devices, and status signals where the configured bank voltages match. For instrumentation, pay particular attention to clock jitter, deterministic routing constraints, and I/O timing at the selected performance grade. Board layout should minimize clock and sensitive-signal routing over split power planes while maintaining continuous return paths for all supply and ground balls.
تجویز کردہ
Video and Image Processing
The XC6SLX45-N3FGG676C is appropriate for embedded video pipelines that combine parallel pixel processing, line or frame buffering, and control logic. Its 2,138,112 RAM bits can accommodate staged pixel or scan-line data, while the 43,661 logic cells support color conversion, thresholding, interpolation, and synchronization logic. The 358 user I/O pins provide extensive parallel connectivity to image sensors, memory interfaces, and downstream display or processing hardware. The integrated digital signal-processing resources should be evaluated in the selected Spartan-6 LX configuration for multiply-accumulate workloads. Video designs must also account for timing closure, clock-domain crossing, and the electrical requirements of each external interface. Choose a different ordering code only when its speed and temperature ratings improve or preserve the required timing margin.
تجویز کردہ
Embedded Signal Processing
The XC6SLX45-N3FGG676C supports parallel signal-processing systems such as filtering, modulation, demodulation, and custom accelerator functions. Its 3,411 logic blocks can implement parallel datapaths, and the 2,138,112 RAM bits can hold coefficients, sample histories, and intermediate results. The 43,661-cell capacity allows control, data acquisition, and digital processing to share one FPGA instead of being split across multiple devices. For high-throughput designs, pipeline registers and DSP-specific resources should be mapped explicitly in the AMD design environment, while external memory interfaces require careful pin placement and impedance-controlled routing. The exact speed grade affects timing closure, so replacement candidates should be compared against the original maximum clock and worst-case timing paths rather than resource counts alone.
تجویز کردہ
High-Performance Embedded Systems
The XC6SLX45-N3FGG676C is useful when an embedded system needs programmable hardware acceleration, extensive I/O, and a field-updatable architecture. Its 43,661 logic cells can host multiple bus masters, custom peripherals, protocol engines, and supervisory software support, while the 676-ball FBGA leaves little unused board area in compact industrial systems. The 2,138,112 RAM bits provide local storage for command queues, status structures, and data buffers. Because configuration must be exercised after power-up, the board should preserve the recommended configuration interface and provide the required configuration and auxiliary supplies. Firmware workflows should also support configuration recovery, and bitstream deployment must use the exact selected device and supported AMD tool version.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC6SLX45-N3FGG676C — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC6SLX45-2FGG676C | XC6SLX45-3FGG676C | XC6SLX45-N3FGG676I | XC6SLX45-2FGG676I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FBGA | 676-ball FBGA - same | 676-ball FBGA - same | 676-ball FBGA - same | 676-ball FBGA - same |
| Device Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 43,661 cells | 43,661 cells | 43,661 cells | 43,661 cells | 43,661 cells |
| Logic Blocks | 3,411 blocks | 3,411 blocks | 3,411 blocks | 3,411 blocks | 3,411 blocks |
| User I/O Pins | 358 pins | 358 pins | 358 pins | 358 pins | 358 pins |
| Block RAM | 2,138,112 bits | 2,138,112 bits | 2,138,112 bits | 2,138,112 bits | 2,138,112 bits |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Ordering-Code Class | N3 commercial designation | -2 commercial designation | -3 commercial designation | N3 industrial designation | -2 industrial designation |
اہم امتیازی خصوصیات
- Exact commercial N3 ordering configuration (بمقابلہXC6SLX45-N3FGG676I)
- Full mid-density Spartan-6 LX resource complement (بمقابلہXC6SLX45-2FGG676C)
- Same-density pin-compatible upgrade options (بمقابلہXC6SLX45-3FGG676C)
ڈیزائن نوٹس
The documented core-supply range is 1.14 V to 1.26 V, but the complete board must also implement every bank, auxiliary, and configuration supply required by the selected Spartan-6 configuration. Follow the AMD power-guidance schematic, assign plane areas by current demand, and place high-frequency decoupling close to the relevant supply and ground balls. Check startup current, configuration behavior, and power sequencing rather than designing only for steady-state logic activity.
The 676-ball FBGA requires escape routing on a multilayer PCB, with signal and power distribution designed for the manufacturer's ball map and reference escape layers. Keep clock and configuration access paths short, maintain continuous ground references, and avoid routing sensitive signals across splits or noisy switching-converter regions. Validate every ball assignment against the package-specific pinout before release because a mechanically similar BGA may have a different electrical assignment.
Configure external interfaces using only the I/O resources and voltage standards permitted for the selected bank, and verify timing against the worst-case speed grade and temperature conditions. A same-package XC6SLX45 alternative can have different timing behavior even when logic, RAM, and I/O counts match. Revalidate setup and hold times, external memory interfaces, and clock-domain crossings after any ordering-code substitution.
تعمیل کی معلومات
The product listing identifies RoHS compliance, and the device description identifies a lead-free package. AEC-Q100, REACH, halogen-free, and conflict-minerals status are not established by the target listing.