Zilog

Z86C9325FSC - 25MHz ROMless 8-Bit MCU | Zilog | 44-QFP

MPN: Z86C9325FSC ✗ اختتامِ زندگی
5.00 V maximum Vdss 44-pin QFP Package 25 MHz Speed External ROMless architecture Memory
MOQ: 1 |

Z86C9325FSC جائزہ

Zilog Z86C9325FSC is an 8-bit CMOS ROMless Z8 microcontroller operating at 25 MHz and supplied in a 44-pin QFP package. The device is based on the Z86C93 controller family and includes a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, and three 16-bit counter timers. Its maximum supply voltage is listed as 5.00 V, while the commercial temperature grade and gull-wing surface-mount construction suit established embedded control applications.

A ROMless microcontroller is an 8-bit embedded processor whose program storage is external rather than embedded in the device. The Z86C9325FSC therefore functions as a complete controller core, using external memory for firmware and data. Within the embedded-device hierarchy, it belongs to the microprocessor and microcontroller class, combines an 8-bit CPU with dedicated arithmetic and timing peripherals, and supports designs requiring deterministic control without a large embedded ROM. External program and data memory also make this architecture useful where firmware updates or field-reprogrammable logic are needed.

The principal feature set includes the 25 MHz maximum clock, ROMless operation, the hardware multiplier, the divider, three 16-bit timer/counter channels, a capture register, and fast decrement mode. Additional interface signals identified for the Z86C9325 family include SCLK, IACK, SYNC, and WAIT. These characteristics make the part suitable for industrial controllers, motor-control systems, instrumentation, communications equipment, and legacy Z8-based embedded products where a compact 8-bit control engine is preferred.

The Z86C93 architecture separates general control from frequently used arithmetic operations. A hardwired 16-bit by 16-bit multiplier accelerates multiplication without a software loop, while the 32-bit by 16-bit divider supports higher-width division tasks. The three 16-bit counters provide timing resources for periodic generation, event counting, pulse measurement, and motor or actuator sequencing. The capture register and fast decrement function improve handling of external timing events and countdown-style control sequences.

The 44-QFP package provides 44 external connections in a square surface-mount form factor. Because this is a ROMless design, the board must provide suitable external program and data memory, address and data buses, and the required control signals. Decoupling and signal-integrity practices become particularly important because processor activity can produce fast bus transitions. The 5.00 V maximum supply rating should be treated as the principal electrical boundary during schematic design and component selection.

Typical implementation involves placing the controller beside external memory and interface circuitry, then using its counters and arithmetic accelerators for control-loop or communication tasks. Firmware timing must allow for memory access and peripheral synchronization. The 25 MHz clock rate provides more computation than typical low-end 8-bit controllers, while the multiplier and divider can reduce instruction overhead in control algorithms. Firmware and memory timing should nevertheless be verified together because external memory access can affect real-time behavior.

This page consolidates the device identity, package information, family-level arithmetic capabilities, sourcing guidance, and engineering trade-offs around the Z86C9325FSC. It also distinguishes a confirmed same-package replacement from functional alternatives that would require a board redesign, helping engineers identify a valid hardware substitution without confusing general MCU similarity with true pin-to-pin compatibility.

کے لیے ڈراپ اِن متبادل Z86C9325FSC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں Z86C9325FSC (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Architecture, Package, Program Memory.

Zilog
Architecture: Z8 8-bit
Package: 48-pin LQFP
Program Memory: External ROM required
موازنہ کریں Z86C9325FSC →

Z86C9325FSG

✅ ڈراپ-اِن
📦 QFP-44
Same 25 MHz Z8 ROMless controller and QFP-44 package; ordering suffix differs and must be checked for temperature and lifecycle suitability

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

Z86C9325FSC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type 8-bit ROMless microcontroller
Architecture Z8
زیادہ سے زیادہ کلاک فریکوئنسی 25 MHz
سپلائی وولٹیج 5.00 V maximum
Multiplier Hardwired 16-bit x 16-bit
Divider Hardwired 32-bit / 16-bit
Counter Timers 3 x 16-bit
Program Memory External ROMless architecture
پیکیج 44-pin QFP
Terminal Count 44 terminals
ماؤنٹنگ اسٹائل Surface mount
Terminal Form Gull wing
Package Shape Square
Temperature Grade Commercial
Additional Interface Signals SCLK, IACK, SYNC, WAIT
Capture Register Present
Fast Decrement Mode Present
Process Technology CMOS

Z86C9325FSC square پن کنفیگریشن گائیڈ

Z86C9325FSC (square پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

Z86C9325FSC کے لیے square پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں Z86C9325FSC.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

Z86C9325FSC کے لیے موزوں ہے 6 ایپلیکیشنs: Legacy Industrial Control, Motor Control and Sequencing, Instrumentation and Signal Conditioning, Communications Controller, Embedded Data Acquisition, Appliance and Service Electronics.

🏭

Legacy Industrial Control

The Z86C9325FSC is appropriate for maintaining an established Z8-based industrial controller because its 8-bit CPU, 25 MHz clock, and ROMless architecture preserve the existing instruction set and external-memory design. The hardwired 16-bit by 16-bit multiplier and 32-bit by 16-bit divider can reduce software overhead in scaling, compensation, and interpolation routines, while three 16-bit timers provide deterministic event-counting resources. Its 5.00 V maximum supply requirement and 44-QFP footprint must match the original board. For industrial service, validate temperature grade, controller lifecycle, and any required diagnostic or programming accessories before deployment.

🔧

Motor Control and Sequencing

The Z86C9325FSC suits legacy motor-control and sequencing platforms built around the Z86C93 architecture. Its three 16-bit counter timers support periodic timing, event counting, and actuator sequencing, while the capture register assists with external timing measurements. The hardware multiplier accelerates multiplication in position, speed, and scaling calculations, and the 32-bit by 16-bit divider supports higher-width arithmetic. Because the MCU is ROMless, firmware remains in external memory and must be coordinated with bus timing. Confirm the counter assignments, external driver interfaces, protection scheme, and worst-case timing before adapting it to a new motor platform.

📟

Instrumentation and Signal Conditioning

The Z86C9325FSC can support legacy instrumentation front ends when the host controller must combine external-memory firmware with dedicated arithmetic. Its 25 MHz 8-bit processor provides useful throughput for sensor conditioning, calibration, and display-control tasks, while the hardwired multiplier and divider improve computational efficiency without replacing the CPU. The three timers can organize sampling, conversion, and communication intervals, and the capture register can record external events. Because the maximum supply voltage is 5.00 V, analog and digital interfaces require suitable scaling and isolation. Check signal-conditioning accuracy, sampling latency, external memory access time, and grounding in the completed instrument.

🌐

Communications Controller

The Z86C9325FSC is applicable to established communications-controller designs that use the Z8 core, external program memory, and deterministic peripheral timing. The 25 MHz clock can support protocol and framing routines, while SCLK, IACK, SYNC, and WAIT signals provide the basis for coordinated bus transactions. Three 16-bit timers can support baud-rate generation, timeout handling, and frame timing, while the hardware multiplier assists with checksums and data manipulation. The ROMless architecture is useful when firmware needs external storage, although program-memory access time must be included in timing analysis. Verify signal timing, bus direction, interrupt behavior, and electrical levels against the original design.

📊

Embedded Data Acquisition

The Z86C9325FSC fits a legacy embedded acquisition system when the controller must coordinate converters, memory, and data processing around a compact 8-bit architecture. Its three 16-bit timers can sequence sampling and conversion intervals, and the capture register can capture external timing references. The dedicated multiplier and divider assist with gain, offset, scaling, and statistical calculations, while the 25 MHz clock allows firmware to service multiple peripheral events. External program and data memory are mandatory elements of the ROMless design. Engineers should verify acquisition timing, memory wait states, interrupt latency, analog input conditioning, and the board's 5.00 V power budget.

🧩

Appliance and Service Electronics

The Z86C9325FSC is useful for repair and continuation designs in legacy appliance and service electronics where an existing 44-QFP control board already uses the Z86C93 architecture. The dedicated multiplier, divider, and three timers support motor timing, state sequencing, and load-related calculations without requiring a redesign of the original firmware. Because the MCU is ROMless, replacement hardware must be accompanied by the correct external program-memory arrangement and loading process. A service engineer should verify the complete ordering suffix, temperature grade, supply tolerance, external memory timing, and every board-level signal before replacing the original controller.

What is the Z86C9325FSC?
The Z86C9325FSC is an 8-bit ROMless Z8 microcontroller operating at up to 25 MHz in a 44-pin QFP package. According to the Zilog Z86C93 datasheet, the device includes a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, three 16-bit counter timers, a capture register, and fast decrement mode. Its ROMless architecture requires external program memory rather than internal firmware storage.
What is the maximum clock speed of the Z86C9325FSC?
The Z86C9325FSC supports a maximum clock frequency of 25 MHz. The Zilog Z86C93 datasheet identifies the device as an 8-bit CMOS ROMless Z8 microcontroller with a 25 MHz operating clock. Actual system timing can be lower when external memory access, bus arbitration, wait states, or peripheral synchronization limits are present, so the memory timing should be checked in the completed circuit.
Where can I download the Z86C9325FSC datasheet PDF?
The Z86C9325FSC datasheet can be obtained through the Zilog Z86C93 datasheet page linked on this product page. The document identifies the MCU as an 8-bit CMOS ROMless Z8 controller with a 25 MHz clock, a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, and three 16-bit counter timers. Use the manufacturer's pin-description table when assigning signals and checking the 44-QFP footprint.
Where can I find the Z86C9325FSC pinout?
The Z86C9325FSC pinout is found in the pin-description and package diagrams of the Zilog Z86C93 datasheet. The device is a 44-pin square QFP with gull-wing leads, and its family documentation also identifies SCLK, IACK, SYNC, and WAIT as additional signals. Use the datasheet's numbered package drawing to verify every net before creating a PCB footprint or assigning a substitute device.
What is the best drop-in replacement for the Z86C9325FSC?
The Z86C9325FSG is the confirmed same-package drop-in candidate identified for the Z86C9325FSC, with both listed as 44-pin QFP surface-mount devices operating at 25 MHz. The principal distinction is the device ordering suffix, so temperature-grade, operating-range, and ordering requirements must be checked before substitution. No additional alternatives are presented because a different package would require PCB changes.
Can the Z86C9325FSG replace the Z86C9325FSC?
The Z86C9325FSG can serve as a same-package candidate for the Z86C9325FSC because the comparison lists both parts as 25 MHz Z8 ROMless controllers in 44-pin QFP packages. Compatibility still depends on the meaning of the ordering suffix, including commercial versus extended temperature requirements and any ordering or lifecycle constraints. Confirm the complete suffix specification before releasing a production PCB.
Z86C9325FSC vs Z86C9325FSG: which one is better for an industrial controller?
The Z86C9325FSG is the better candidate when the PCB already uses the 44-QFP footprint and its ordering suffix satisfies the required temperature grade. Both devices are identified as 25 MHz, 8-bit ROMless Z8 controllers with the same QFP-44 package format, so the comparison is primarily about ordering, temperature, lifecycle, and sourcing requirements rather than CPU speed. For a new design, verify availability and qualification before choosing either suffix.
When should I choose the Z86C9325FSC instead of another 8-bit microcontroller?
Choose the Z86C9325FSC when an existing design specifically requires its Z8 instruction set, external-memory architecture, 25 MHz clock, hardware multiplier, divider, and established 44-QFP footprint. Its dedicated arithmetic blocks can reduce software overhead in multiplication and division workloads, while three 16-bit timers support event and timing functions. A different MCU may be preferable for a new design when active lifecycle status, toolchain support, or current sourcing is more important than compatibility.
Is the Z86C9325FSC suitable for motor control and timing applications?
The Z86C9325FSC is suitable for legacy motor-control and timing designs that already use its Z8 peripheral architecture. The Zilog Z86C93 datasheet identifies three 16-bit counter timers, a capture register, and fast decrement mode, while the hardwired 16-bit by 16-bit multiplier supports common control calculations. The design must still validate motor-drive timing, protection behavior, external memory access, and required peripheral interfaces.
How much power does the Z86C9325FSC consume?
The operating-current and quiescent-current figures for the Z86C9325FSC must be taken from the electrical characteristics in the Zilog Z86C93 datasheet for the actual clock, supply voltage, and operating mode. The confirmed device identity is an 8-bit ROMless controller with a 25 MHz maximum clock and 5.00 V maximum supply voltage. Board-level power budgeting should include external memory, pull resistors, interface logic, and any attached power drivers.
What is the lead time for the Z86C9325FSC?
The current lead time and minimum order quantity for the Z86C9325FSC should be requested through the Request a Quote form on this page. The part is an established 44-QFP Z8 ROMless MCU, but legacy inventory and production availability can vary by suffix and region. Provide the exact MPN, required quantity, date code, and delivery destination so the supplier can confirm the current allocation.
Is the Z86C9325FSC in stock?
Current Z86C9325FSC stock should be confirmed through the Request a Quote form on this page by submitting the exact MPN and required quantity. The component is an 8-bit, 25 MHz ROMless microcontroller in a 44-QFP package, and availability may depend on remaining factory inventory rather than ongoing production. Include target date, lot preferences, and packaging requirements when requesting a quotation.
What is the price of the Z86C9325FSC?
The current price of the Z86C9325FSC is provided through the Request a Quote form on this page after the required quantity and delivery terms are specified. Use the exact manufacturer MPN, Z86C9325FSC, to avoid confusion with temperature-grade, package, or ordering-suffix variants. A quotation also allows the supplier to account for date code, trace documentation, and current legacy-inventory status.
Is the Z86C9325FSC RoHS compliant?
The RoHS status of the Z86C9325FSC must be confirmed for its exact ordering suffix and shipment condition through the Request a Quote form on this page. RoHS status is not established by the device's 8-bit ROMless architecture or 25 MHz operating speed. The request should specify the complete Z86C9325FSC MPN and ask for the current material-compliance declaration associated with that configuration.
What are the key specifications of the Z86C9325FSC that engineers should know?
The Z86C9325FSC combines an 8-bit Z8 core, 25 MHz maximum clock, ROMless external-memory architecture, and 44-pin QFP construction. According to the Zilog Z86C93 datasheet, dedicated hardware includes a 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, three 16-bit counters, a capture register, and fast decrement mode. The 5.00 V maximum supply rating and external memory requirement are central to board-level implementation.
What can replace the Z86C9325FSC in a legacy Z8 design?
The Z86C9325FSG is the identified drop-in candidate for a 44-QFP Z86C9325FSC board because it shares the 25 MHz Z8 ROMless controller format and QFP-44 package. The Z86C9325FSG ordering suffix must be reviewed for temperature and lifecycle suitability. Other Z8 controllers in different packages may offer functional similarity, but they are not drop-in choices unless their exact pin arrangement and electrical requirements match.

کے لیے انجینئرنگ ریفرنس ڈیٹا Z86C9325FSC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the Z86C9325FSC when maintaining an existing Z8 ROMless design that uses the 25 MHz Z86C93 architecture, external program memory, three 16-bit timers, and the established 44-QFP footprint. Its hardwired multiplier and divider are valuable in legacy control and instrumentation products because they can reduce software overhead without changing the Z8 instruction set. Choose the Z86C9325FSG as the confirmed same-package candidate when its ordering suffix satisfies the board's temperature, lifecycle, and sourcing requirements. Do not select another Z8 controller merely because its clock speed is similar; verify package pins, external-memory organization, timing, peripherals, and firmware dependencies. For a completely new product, favor a currently supported MCU family unless preserving an existing board, firmware, or certification investment outweighs the lifecycle disadvantages of this legacy controller.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ Z86C9325FSG
Package QFP-44 QFP-44
Brand Zilog Zilog
Device Type 8-bit ROMless microcontroller 8-bit ROMless microcontroller
Maximum Clock Frequency 25 MHz 25 MHz
Architecture Z8 Z8
Maximum Supply Voltage 5.00 V 5.00 V maximum
Mounting Style Surface mount Surface mount

اہم امتیازی خصوصیات

  • Dedicated arithmetic hardware supports efficient 8-bit embedded control (بمقابلہGeneral-purpose 8-bit microcontrollers without equivalent hardwired blocks)
  • Three dedicated timing channels support concurrent embedded-control tasks (بمقابلہSingle-timer or timer-limited general-purpose 8-bit controllers)
  • Established Z8 ROMless architecture preserves legacy firmware and external-memory designs (بمقابلہNewer MCU families requiring a different instruction set and toolchain)
  • A confirmed same-package ordering option exists for the 44-QFP footprint (بمقابلہZ86C9325FSG)

ڈیزائن نوٹس

Design the 5.00 V supply rail with local high-frequency decoupling placed directly beside the controller's supply and ground connections. The ROMless MCU depends on external memory, which may contribute substantial switching current during bus activity. Separate analog and digital return paths where the board supports mixed-signal measurement. Confirm supply tolerance, startup sequencing, and the voltage present on every controller and memory pin because the Z86C9325FSC's identified maximum supply rating is 5.00 V.

Preserve the established 44-QFP land pattern and verify pin 1 orientation against the manufacturer's package drawing before releasing artwork. External program memory, data memory, address lines, and control signals must follow the Z86C93 bus requirements. Place decoupling and any memory devices close to their associated controller pins, and avoid routing the external bus through long unprotected branches. A footprint derived from terminal count alone is insufficient because land width, pitch, span, and pin-1 orientation must match the specified package.

Do not treat a controller with the same Z8 family name as a drop-in replacement without checking the package, clock rating, memory organization, ordering suffix, and temperature grade. The confirmed same-package candidate is the Z86C9325FSG, whose 44-QFP format and 25 MHz rating align with the target. Firmware also depends on external memory and device-specific bus timing. Validate startup vectors, wait-state behavior, interrupt sources, peripheral addresses, and programming procedure before installing a substitute.

Review external-memory access timing as part of the processor design rather than treating the 25 MHz CPU clock as the only timing constraint. Address, data, and control lines should have short, continuous return paths, and the board should avoid stubs or unnecessary test-probe branches. If the design includes synchronous external devices, verify setup and hold margins across temperature and supply tolerances. The controller's hardwired arithmetic reduces computation time but does not remove the electrical timing requirements of the external bus.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No exact-suffix environmental or automotive compliance declaration was identified. The commercial temperature-grade classification does not by itself establish RoHS, REACH, or AEC-Q100 status. Request the current compliance documentation for the exact MPN through the Request a Quote form.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-17 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

Z86C9325FSC datasheet Z86C9325FSC pinout Z86C9325FSC datasheet pdf Z86C9325FSC equivalent Z86C9325FSC replacement Z86C9325FSC vs Z86C9325FSG Z86C9325FSC price Z86C9325FSC stock Zilog Z86C9325FSC Z86C9325 44-QFP pinout Z86C9325FSC application circuit Z86C9325FSC footprint

متعلقہ اجزاء اور اصطلاحات

Zilog Z86C9325FSC Z86C9325FSG Z86C93 Z8 8-bit microcontroller ROMless microcontroller embedded processor microcontroller CMOS 25 MHz 16-bit by 16-bit multiplier 32-bit by 16-bit divider 16-bit counter timer capture register fast decrement mode external program memory SCLK IACK SYNC WAIT QFP-44 surface mount industrial control motor control data acquisition
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں