Zilog

Z86E2116FSC - 16MHz 8KB OTP 8-Bit MCU | Zilog

MPN: Z86E2116FSC ✓ فعال
44-pin QFP Package 16 MHz Speed 8 KB OTP Memory
MOQ: 1 |

Z86E2116FSC جائزہ

The Zilog Z86E2116FSC is an 8-bit Z8 CMOS OTP microcontroller operating at 16 MHz with 8 KB of one-time-programmable memory and UART capability, housed in a 44-pin QFP package. It combines a compact embedded-control footprint with dedicated serial communications, making it suitable for appliance controls, industrial interfaces, and compact embedded systems.

An 8-bit microcontroller is a microprocessor optimized for embedded control tasks such as reading sensors, operating relays, driving displays, and managing communication peripherals. The Z86E2116FSC belongs to the Z8 family of CMOS application-specific controllers, where the CPU, memory, timers, I/O, and communication functions are integrated into one device. Its 8 KB OTP program memory supports a fixed application program, while its 16 MHz operating speed provides the timing required for common control-loop and serial-interface tasks.

The principal features include an 8-bit processor core, 8 KB OTP program memory, 16 MHz clock operation, UART support, and a 44-pin QFP package. The UART allows the controller to exchange formatted serial data with sensors, programmers, modules, or supervisory electronics. OTP memory also gives a production design a stable, programmed configuration without an external writable program-memory component.

Technical selection should focus on whether the required peripherals, voltage range, clock configuration, and interrupt architecture are sufficient for the target design. Because firmware is permanently programmed after device programming, prototype changes require a different programmed MCU rather than a routine field update. Engineers should also verify oscillator, reset, I/O, and serial-interface requirements against the manufacturer datasheet before schematic capture.

Typical uses include compact appliance controllers, serial-interface modules, keypad and display products, industrial control boards, and embedded peripheral control. In these systems, the MCU can supervise inputs, execute control logic, and manage UART communication while keeping the footprint within a 44-pin surface-mount package.

PCB design should preserve access to every programming and test signal, maintain adequate copper around ground and power pins, and follow the datasheet's recommended decoupling layout. Because OTP programming is a one-time manufacturing operation, production traceability and device marking should be designed into the process, while firmware changes should be accommodated by maintaining a replaceable MCU footprint.

This product page consolidates the confirmed 8-bit, 16 MHz, 8 KB OTP, UART, and 44-QFP characteristics with package guidance, sourcing information, design notes, and a qualified comparison framework. It is intended to help engineers verify functionality and manufacturing readiness without treating a family member as a drop-in substitute without further engineering review.

کے لیے ڈراپ اِن متبادل Z86E2116FSC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں Z86E2116FSC (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف RoHS Status, Terminal Form.

Zilog
RoHS Status: Non_compliant
Terminal Form: J-bend
موازنہ کریں Z86E2116FSC →

Z86E2116VSC

✅ ڈراپ-اِن
Zilog
📦 44-pin QFP
8-bit CMOS microcontroller · Z8 · 16 MHz · 8 bit · OTP · 8 KB (8K × 8) · UART · 44-lead PLCC

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

Z86E2116FSC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type 8-bit CMOS OTP microcontroller
Series Z8
Maximum CPU Clock 16 MHz
Program Memory 8 KB OTP
Program Memory Organization 8K x 8 bits
Serial Interface UART
پیکیج 44-pin QFP
Package Code QFP
Terminal Count 44 terminals
Package Shape Square
Terminal Form Gull wing
Temperature Grade Commercial
ماؤنٹنگ ٹائپ Surface mount
RoHS اسٹیٹس unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Z86E2116FSC square پن کنفیگریشن گائیڈ

Z86E2116FSC (square پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

Z86E2116FSC کے لیے square پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں Z86E2116FSC.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

Z86E2116FSC کے لیے موزوں ہے 6 ایپلیکیشنs: Appliance Control Boards, UART-Based Peripheral Modules, Industrial Interface Controllers, Keypad and Display Products, Sensor Interface Modules, Embedded Peripheral Control.

🔧

Appliance Control Boards

The Z86E2116FSC fits compact appliance controllers that require permanent control firmware, digital I/O, and a serial diagnostic channel. Its 16 MHz 8-bit CPU provides timing for control tasks, while 8 KB of OTP program memory supports a finalized operating program. In a typical product, the MCU scans buttons or sensors, manages relays and indicators, and uses the UART for service diagnostics or an external display. The 44-pin QFP keeps lead spacing compatible with conventional surface-mount assembly. Before release, confirm the complete pin map, clock requirements, and electrical operating range in the manufacturer datasheet.

🌐

UART-Based Peripheral Modules

The Z86E2116FSC is appropriate for a small embedded peripheral that exchanges commands or status data through a UART. Its integrated serial capability avoids a separate communication controller, and the 16 MHz operating rate supports responsive handling of framed data and local I/O. A module could use the MCU to interpret host commands, operate an actuator, and return status. Because OTP memory is not field-rewritable, the design should reserve programming and manufacturing-test access before production. According to the manufacturer datasheet, UART clocking, baud-rate configuration, and signal levels must be matched to the system interface.

🏭

Industrial Interface Controllers

The Z86E2116FSC can serve as the local controller in a compact industrial interface that accepts digital commands and reports state over UART. The 8-bit architecture and 16 MHz clock are suitable for deterministic supervisory functions such as input debouncing, output sequencing, and status-word generation. Its 8 KB OTP program memory favors a fixed, relatively compact control function rather than a large protocol stack. System integrators should verify the operating-temperature range, supply voltage, and I/O ratings in the manufacturer datasheet. They should also reserve programming contacts because the MCU's OTP program memory cannot be revised after programming.

📱

Keypad and Display Products

The Z86E2116FSC fits keypad, menu, and small display controllers where a dedicated low-cost MCU must scan inputs and manage an interface. The 16 MHz clock provides sufficient execution rate for contact scanning, display updates, and communication tasks, while the integrated UART can connect to a host or display controller. Eight kilobytes of OTP memory is appropriate for a compact, stable interface program rather than a feature-rich graphical application. During schematic design, consult the manufacturer pin-description table for multiplexed I/O and display connections. Validate timing and bus-direction requirements because package compatibility alone does not establish complete peripheral compatibility.

🧩

Sensor Interface Modules

The Z86E2116FSC can coordinate a small sensor module that samples digital inputs, evaluates control thresholds, and reports measurements through a serial link. The UART supports communication with a sensor, host processor, or configuration tool, while the 16 MHz 8-bit core handles protocol and control tasks. The 8 KB OTP capacity is well suited to a focused measurement-control program that does not require in-field firmware updates. According to the manufacturer datasheet, confirm the available I/O count, ADC availability, oscillator arrangement, and electrical limits before assigning sensor signals. Preserve access to the programming interface so each device can be configured during manufacturing.

⚡

Embedded Peripheral Control

The Z86E2116FSC is useful in compact auxiliary controllers that coordinate relays, indicators, and a host serial port. Its 16 MHz 8-bit processor can execute a fixed sequence of control actions, and the UART permits command exchange with a primary controller. The 44-pin QFP provides a conventional surface-mount option with accessible leads for inspection and rework. Engineers should confirm that every required peripheral, interrupt source, and I/O function appears in the manufacturer datasheet. If the application requires field-updatable firmware, choose a controller with rewritable program memory rather than using the Z86E2116FSC's one-time-programmable architecture.

What is the Z86E2116FSC?
The Z86E2116FSC is an 8-bit CMOS OTP microcontroller in the Zilog Z8 family, operating at up to 16 MHz with 8 KB of one-time-programmable memory and UART capability. The device is supplied in a 44-pin QFP package for surface-mounted embedded-control designs. According to the manufacturer datasheet and product listings, its key identities are the 8-bit processor, 16 MHz clock, 8 KB OTP memory, and integrated serial interface.
How much program memory does the Z86E2116FSC have?
The Z86E2116FSC provides 8 KB of one-time-programmable program memory, organized as 8K x 8 bits. This memory is suitable for a fixed embedded-control program and cannot be rewritten after programming. According to the manufacturer datasheet, this 8 KB figure distinguishes the MCU from related Z8 devices offering larger program-memory configurations, so firmware size must be checked before design release.
What is the maximum clock frequency of the Z86E2116FSC?
The Z86E2116FSC operates at a maximum clock frequency of 16 MHz. According to the manufacturer datasheet, this clock supports execution of embedded-control logic and UART communication tasks in a compact 8-bit architecture. The 16 MHz rating is the headline timing specification for the device, although the complete design must still satisfy the voltage, oscillator, and timing requirements stated in the datasheet.
What package does the Z86E2116FSC use?
The Z86E2116FSC is offered in a 44-pin QFP package with a square body and gull-wing terminals for surface mounting. Product records identify the package code as QFP and list 44 terminals. The manufacturer datasheet should be used for exact body dimensions, lead pitch, pin orientation, exposed-pad information, and PCB land-pattern requirements before creating the footprint.
Does the Z86E2116FSC include a UART?
Yes, the Z86E2116FSC includes UART capability for serial communication with external controllers, sensors, modules, or programming equipment. According to the manufacturer product information, the MCU is an 8-bit device with 8 KB OTP memory, a 16 MHz operating speed, and a UART. The datasheet should be consulted for baud-rate generation, interrupt behavior, signal levels, and peripheral-sharing limitations.
Where can I download the Z86E2116FSC datasheet PDF?
The Z86E2116FSC datasheet PDF can be accessed through the manufacturer datasheet link listed on this page. According to the official document record, it describes the Z8 CMOS OTP microcontroller, electrical characteristics, package information, and device functions. Use the pin-description table and connection diagrams from that document when assigning PCB signals, programming the OTP memory, and checking operating limits.
Where can I find the Z86E2116FSC pinout?
The Z86E2116FSC pinout is located in the manufacturer datasheet's pin-description and package-drawing sections. The device uses a 44-pin QFP package, but individual pin numbers and signal assignments are not reproduced on this page. According to the manufacturer document, use that table to map power, ground, clock, I/O, reset, and UART connections before laying out the PCB.
Is the Z86E2116FSC suitable for UART-based appliance control?
The Z86E2116FSC is suitable for UART-based appliance control when the application can fit within 8 KB of OTP program memory and does not require firmware updates after programming. Its 16 MHz clock and integrated UART support embedded control and serial communication in a compact 44-QFP device. According to the manufacturer datasheet, verify the required peripheral set and electrical limits before finalizing the design.
What is the difference between Z86E2116FSC and Z86E2116VSC?
The Z86E2116FSC and Z86E2116VSC are closely related Zilog Z8 OTP microcontroller variants, and both are listed as 8-bit devices with 8 KB OTP memory and 16 MHz operation. The visible product records do not establish the complete electrical or pin-level differences between the F and V package variants. According to the manufacturer datasheets, compare their exact suffix-specific feature tables and package drawings before treating one as a drop-in replacement.
Can Z86E2116VSC replace Z86E2116FSC?
Z86E2116VSC may be a candidate replacement for Z86E2116FSC because both are Zilog Z8 devices listed with an 8-bit CPU, 8 KB OTP memory, and 16 MHz operation. However, the suffix-specific pin assignments, electrical ratings, temperature range, and exposed programming details must be compared. According to the manufacturer documentation, approve the substitution only after confirming complete pin and parameter compatibility.
When should I choose Z86E2116FSC over Z86E2116VSC?
Choose Z86E2116FSC when its exact suffix-specific package, qualification, temperature, and peripheral configuration satisfies the target design. Z86E2116VSC is the closest identified family candidate for evaluation because it shares the 8-bit, 16 MHz, and 8 KB OTP headline ratings. According to the manufacturer datasheets, use Z86E2116FSC when its full ordering code is the approved production configuration and do not infer interchangeability from the common family name alone.
What can replace the Z86E2116FSC?
The closest identified replacement candidate is Z86E2116VSC, which shares the 8-bit processor, 16 MHz clock, 8 KB OTP memory, and related Z8 product family. It should not be treated as a confirmed drop-in replacement without checking every pin, voltage, timing, temperature, and programming specification. According to the manufacturer datasheets, perform a board-level equivalence review and confirm the exact ordering suffix before procurement.
Is there a direct cross-brand equivalent for the Z86E2116FSC?
No cross-brand drop-in equivalent is confirmed for the Z86E2116FSC. The cross-reference results identify parametric-search tools but do not establish a competing MCU with the same 44-pin footprint, pin assignments, OTP program memory, UART behavior, and firmware constraints. According to the available manufacturer information, use Z86E2116VSC as the same-brand family candidate and migrate firmware and validate the PCB rather than assuming functional equivalence.
Where can I buy Z86E2116FSC and what is its lead time?
Use the Request a Quote form on this page to check Z86E2116FSC availability, current commercial terms, minimum order quantity, and lead time for your requested quantity. The manufacturer and distributor records identify the device as an orderable catalog part, but they do not provide a uniform stock or lead-time commitment across channels. For production planning, request the quantity-specific delivery schedule and lot traceability through the quote workflow.
What is the price of Z86E2116FSC?
The current commercial price for Z86E2116FSC should be obtained through the Request a Quote form on this page, where quantity, packaging, and delivery requirements can be specified. According to the distributor product records, market availability can change and historical catalog pricing is not a reliable current quotation. Request a quantity-specific quote for production planning rather than relying on a historical unit price.
Is Z86E2116FSC in stock?
Z86E2116FSC stock levels should be confirmed through the Request a Quote form on this page for the required quantity and package configuration. According to distributor listings, the MCU is actively offered in the market, but individual inventories and lead times vary by channel and order volume. Submit the request with your schedule, authorized quantity, and traceability requirements to receive a current allocation response.
What are the key specifications engineers should know about Z86E2116FSC?
The key Z86E2116FSC specifications are an 8-bit CMOS architecture, 16 MHz maximum clock, 8 KB OTP program memory, integrated UART capability, and a 44-pin QFP package. According to the manufacturer datasheet and product listings, these characteristics define the part as a compact embedded-control MCU with one-time programmable firmware. Supply voltage, RAM, temperature limits, pin assignments, and timing details should be checked in the manufacturer document before schematic approval.

کے لیے انجینئرنگ ریفرنس ڈیٹا Z86E2116FSC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose Z86E2116FSC when the product requires a compact 8-bit Z8 controller with a 16 MHz clock, 8 KB of OTP program memory, UART capability, and a 44-pin QFP package. Its one-time-programmable architecture is appropriate for products whose firmware is finalized before manufacturing and will not require field updates. Z86E2116VSC is the closest identified same-brand family candidate because it shares the processor width, clock rate, OTP capacity, and package class. Use it only after comparing suffix-specific electrical limits, temperature grade, pin assignments, UART implementation, and programming requirements in the manufacturer documentation. No cross-brand drop-in equivalent is confirmed, so software migration, footprint changes, and board validation are necessary if another manufacturer's MCU is considered. For designs needing larger memory, reconfiguration, or a richer peripheral set, select a different MCU family rather than forcing the Z86E2116FSC beyond its intended scope.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ Z86E2116VSC
Brand Zilog Zilog
Package 44-pin QFP 44-pin QFP
CPU Architecture 8-bit 8-bit
Maximum CPU Clock 16 MHz 16 MHz
Program Memory 8 KB OTP 8 KB OTP
Program Memory Organization 8K x 8 bits 8K x 8 bits

اہم امتیازی خصوصیات

  • Integrated UART in an 8 KB OTP MCU (بمقابلہZ86E2116VSC)
  • Production-oriented one-time-programmable memory (بمقابلہZ86E2116VSC)
  • 16 MHz processing rate in a compact controller (بمقابلہZ86E2116VSC)

ڈیزائن نوٹس

Use the manufacturer pin-description table and package drawing to create the 44-pin QFP land pattern. Confirm body size, lead pitch, pin numbering, and any exposed thermal-pad requirement before Gerber release. Place the oscillator, decoupling capacitors, programming contacts, and UART interface components close to their associated pins to minimize trace length, ringing, and susceptibility to external noise.

Do not plan to update application firmware after OTP programming. Maintain a controlled programming and traceability process that records the approved firmware revision for each MCU. Prototype changes must be implemented in a separately programmed device, and production fixtures should verify program identity without disturbing adjacent signals. A PCB change that adds programming access can reduce redesign risk.

Route the UART lines away from switching nodes and noisy clock or relay-control traces. Provide a common, low-impedance ground system and place supply bypass capacitors according to the manufacturer reference layout. If the MCU controls relays, motors, or high-current outputs, keep those paths separate from sensitive serial and timing signals, and account for ground bounce and supply transients.

Determine the operating voltage and current requirements from the manufacturer datasheet before selecting the board power source. The 16 MHz clock rating does not by itself define the permitted voltage range or current consumption. Validate startup, reset, brownout behavior, and maximum peripheral loading across the intended supply conditions so the power tree remains stable during reset and peripheral activation.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The device is an 8-bit embedded microcontroller, so AEC-Q100 automotive qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the product records and remain unknown.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-17 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

Z86E2116FSC datasheet Z86E2116FSC pinout Z86E2116FSC datasheet pdf Z86E2116FSC equivalent Z86E2116FSC replacement Z86E2116FSC cross reference Z86E2116FSC vs Z86E2116VSC Z86E2116FSC footprint Z86E2116FSC price Z86E2116FSC stock Zilog Z86E2116FSC Z86E2116 16MHz 8KB OTP Z86E2116 44-QFP pinout Z86E2116 UART application circuit

متعلقہ اجزاء اور اصطلاحات

Zilog Z86E2116FSC Z86E2116VSC Z8 8-bit microcontroller CMOS microcontroller OTP microcontroller one-time-programmable memory UART 16 MHz clock 8 KB program memory 8K x 8 bits 44-pin QFP QFP package family surface mount embedded control industrial control appliance control sensor interface serial communication RoHS REACH AEC-Q100
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں