BTS428L2ATMA1 vs BTS3050TFATMA1 So sánh

So sánh chi tiết song song của BTS428L2ATMA1 bằng Infineon và BTS3050TFATMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ Hoạt động
Infineon
BTS3050TFATMA1 BTS3050TFATMA1 - 4A Smart Low-Side Power Switch HITFET | Infineon

BTS3050TFATMA1 - 4A Smart Low-Side Power Switch HITFET | Infineon

BTS3050TFATMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS428L2ATMA1 BTS3050TFATMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch —
Technology Smart SIPMOS (vertical N-channel MOSFET with charge pump) —
Number of Channels 1 —
Input Type CMOS-compatible, ground-referenced —
On-State Resistance (R_DS(on)) 50 mOhm (typical) —
Continuous Load Current 5.8 A —
Điện áp cung cấp hoạt động [DATA_NEEDED: nominal and range] —
Standby Current Very low (per datasheet) —
Overvoltage Protection Load-dump / overvoltage clamp —
Overtemperature Protection Yes, with autorestart —
Diagnostic Feedback Yes (open-load, short-circuit, overtemperature) —
Hộp PG-TO252-5-11 (DPAK-5, 4 leads + tab) PG-TO252-3-313 (TO-252 / DPAK)
Kiểu lắp đặt Surface Mount Surface Mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: min/max] —
RoHS / Pb-Free Yes (Green product, Pb-free finish, J-STD-020) —
Soldering Pb-free reflow per IPC/JEDEC J-STD-020 —
Qualification Automotive-grade (PROFET family) —
Part Number — BTS3050TFATMA1
Manufacturer — Infineon Technologies
Product Family — HITFET Smart Low-Side Switch
Switch Type — N-Channel Low-Side Smart Power Switch
Số lượng đầu ra — 1
RDS(on) (typ) — 44 mOhm at 25 C
Continuous Drain Current — 4 A
Load Voltage (max) — 5.5 V
Logic Input — CMOS compatible, logic-level
Status Output — Yes (fault feedback)
Protection Features — Over-current, Over-temperature, Over-voltage, ESD
Nhiệt độ hoạt động — -40 C to +150 C (junction)
AEC-Q100 — Qualified
RoHS — Compliant

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá