BTS5215LAUMA1 vs TPS4H000BQPWPRQ1 So sánh

So sánh chi tiết song song của BTS5215LAUMA1 bằng Infineon và TPS4H000BQPWPRQ1 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS5215LAUMA1 BTS5215LAUMA1 - Dual 90mΩ Smart High-Side Switch | Infineon

BTS5215LAUMA1 - Dual 90mΩ Smart High-Side Switch | Infineon

BTS5215LAUMA1 ✓ Hoạt động
Texas Instruments
TPS4H000BQPWPRQ1 TPS4H000BQPWPRQ1 - 40V 4-Ch Smart High-Side Switch | TI

TPS4H000BQPWPRQ1 - 40V 4-Ch Smart High-Side Switch | TI

TPS4H000BQPWPRQ1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS5215LAUMA1 TPS4H000BQPWPRQ1
Thương hiệu Infineon Texas Instruments
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch Quad-channel smart high-side switch
Number of Channels 2 4
On-State Resistance (RDS(on)) 90 mΩ typical per channel —
Continuous Output Current per Channel 3.7 A —
Operating Voltage Range 8 V to 36 V —
Standby Current Very low (datasheet value [DATA_NEEDED: standby current uA]) —
Input Logic Compatibility CMOS-compatible, ground-referenced —
Diagnostic Feedback Status feedback per channel —
MOSFET Technology N-channel vertical power MOSFET with charge pump —
Load Type Support Resistive and inductive loads —
Protection Features Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage —
Demagnetization Fast demagnetization of inductive loads —
Hộp PG-DSO-12-9 20-pin HTSSOP (PWP) with exposed pad
Nhiệt độ hoạt động -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] —
Trạng thái RoHS Compliant Compliant
Supply Voltage Range — 3.4 V to 40 V
On-Resistance (per channel) — 1000 mOhm (typical)
Rated Output Current (per channel) — 750 mA
Giới hạn dòng điện — External, adjustable
Current Sense — High-accuracy, multiplexed via CS pin
Diagnostics — Open-load, short-circuit, thermal, full fault reporting
Control Inputs — IN1, IN2, IN3, IN4, SEL
Qualification — AEC-Q100 qualified (automotive)
Kiểu lắp đặt — Surface Mount
Power FET Type — Integrated NMOS with internal charge pump
Target Rails — 12-V and 24-V automotive/industrial
Protection — Overload, thermal shutdown, output clamp

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá