DRV8873HPWPR vs TMP816PWR So sánh

So sánh chi tiết song song của DRV8873HPWPR bằng Texas Instruments và TMP816PWR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
DRV8873HPWPR DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments

DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments

DRV8873HPWPR ✓ Hoạt động
Texas Instruments
TMP816PWR TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số DRV8873HPWPR TMP816PWR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Motor Drivers Motor Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Motor Type Brushed DC —
Cấu trúc H-Bridge (4 N-channel MOSFETs) Single-phase full-wave BLDC fan predriver
Supply Voltage (VM) 4.5 V to 38 V —
Absolute Maximum VM 40 V —
Peak Output Current 10 A —
Continuous Output Current 3.5 A (with proper PCB thermal design) —
RDS(on) per HS+LS FET [DATA_NEEDED: typical mOhm at 25 C] —
Integrated Current Sensing Yes (IPROPI analog output) —
Control Interface PH/EN (hardware) or PWM, selectable via MODE —
Current Regulation Yes (Smart-tune or fixed off-time) —
Nhiệt độ hoạt động -40 C to +125 C —
Hộp 24-pin HTSSOP (PWP) with PowerPAD 20-pin TSSOP (PW), 4.40 mm width
Kiểu lắp đặt Surface Mount Surface Mount
Cấp MSL 3 (168 hr / 260 C) 1 (unlimited floor life at <30 °C / 85 % RH)
Trạng thái RoHS Compliant Compliant
AEC-Q100 Not qualified (use DRV8873-Q1 for automotive) —
Supply Voltage (VCC) — 6 V to 16 V
Maximum Supply Voltage — 18 V
Load Voltage — 10 V
Output Current — 20 mA (gate drive to external PNP+NMOS)
Số lượng đầu ra — 1 (pre-driver output pair)
Current Limit Threshold — Adjustable (external resistor)
Khoảng nhiệt độ hoạt động — -30 °C to +95 °C
Control Input — PWM speed command
Tachometer Output — FG (frequency-generator) signal
External Power Stage — PNP + N-channel MOSFET pair
Protection Features — Thermal shutdown, adjustable current limit, lock-rotor protection
Lead-Free — Yes
Drive Method — Full-wave, sensored (Hall-element input)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá