EPC4QC1C00N vs EPC4QC100T So sánh

So sánh chi tiết song song của EPC4QC1C00N bằng Altera và EPC4QC100T bằng Altera. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

So sánh thông số kỹ thuật

Tham số EPC4QC1C00N EPC4QC100T
Thương hiệu Altera Altera
Danh mục FPGA & CPLD Memory ICs
Trạng thái vòng đời Obsolete NRND
Device Family Enhanced Configuration Device (EPC4) —
Memory Density 4 Mbit (4,194,304 bits) 4 Mbit
Supply Voltage (VCC) 3.0 V to 3.6 V (3.3 V typical) 3.0 V to 3.6 V (3.3 V typ)
I/O Voltage Tolerance 3.3 V / 5 V tolerant —
Interface to FPGA Serial DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE —
Configuration Data Width 4-bit multiplexed on single DATA pin —
Hộp 100-pin PQFP (QFP-100) 100-pin PQFP (Plastic Quad Flat Pack), 20 x 14 mm
Nhiệt độ hoạt động -40 C to +85 C (industrial) -40 C to +85 C (industrial)
In-System Programming JTAG (IEEE 1149.1) IEEE 1149.1 JTAG + serial interface
Programming Voltage On-chip generated, no external VPP —
Page Mode Yes, multi-page storage supported —
Target FPGA Families Stratix, Cyclone, APEX, Mercury, ACEX —
Configuration Clock (DCLK) [DATA_NEEDED: DCLK max frequency] —
Cấp MSL 3 (per JEDEC J-STD-020) 3 (per JEDEC J-STD-020)
Trạng thái RoHS [DATA_NEEDED: RoHS compliance status] —
Lead-Free [DATA_NEEDED: lead-free status] —
Kiểu bộ nhớ — Flash configuration PROM (non-volatile)
Configuration Interface — Serial / x8 Parallel (selectable)
Maximum Serial Clock Frequency — 66 MHz
Supported FPGAs — Altera/Intel Cyclone, Stratix, APEX families
I/O Voltage (VCCIO / MultiVolt) — 1.8 V / 2.5 V / 3.3 V / 5.0 V
JTAG Support — Yes (1149.1 boundary-scan compliant)
Configuration Modes — Serial (1-bit) and Parallel (x8)
Daisy-Chain Support — Yes (EPC4-to-EPC4 only)
Kiểu lắp đặt — Surface Mount
Lead-Free / RoHS — Lead-free; RoHS compliance depends on date code

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá