MC9S08QG4CDNE vs MC9S08QA4CDNE So sánh

So sánh chi tiết song song của MC9S08QG4CDNE bằng NXP Semiconductors và MC9S08QA4CDNE bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MC9S08QG4CDNE MC9S08QG4CDNE - 20MHz 8-Bit 4KB Flash MCU | NXP

MC9S08QG4CDNE - 20MHz 8-Bit 4KB Flash MCU | NXP

MC9S08QG4CDNE ✗ Cuối đời
NXP Semiconductors
MC9S08QA4CDNE MC9S08QA4CDNE - 20MHz 4KB 8-Bit MCU | NXP

MC9S08QA4CDNE - 20MHz 4KB 8-Bit MCU | NXP

MC9S08QA4CDNE ✗ Cuối đời

So sánh thông số kỹ thuật

Tham số MC9S08QG4CDNE MC9S08QA4CDNE
Thương hiệu NXP Semiconductors NXP Semiconductors
Danh mục Microcontrollers Microcontrollers
Trạng thái vòng đời Cuối chu kỳ cuộc sống Cuối chu kỳ cuộc sống
Product Type 8-bit HCS08 microcontroller 8-bit HCS08 microcontroller
CPU Architecture S08 core with HCS08 instruction set HCS08 with HC08 instruction set and BGND instruction
Maximum Clock Speed 20 MHz —
Flash Memory 4 KB (4K x 8) 4 KB (4K × 8 bits)
Supply Voltage Range 1.8 V to 3.6 V 1.8 V to 3.3 V
I/O Port Count 6 ports —
Hộp 8-pin SOIC 8-pin SOIC
Package Reference MS-012AA —
Kiểu lắp đặt Surface mount Surface Mount
Instruction Set HCS08 with added BGND instruction —
Debug Support Background debugging system with breakpoint capability —
Architecture Family S08QG —
Product Category Microcontroller IC —
Trạng thái RoHS RoHS compliant —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
RAM [DATA_NEEDED: RAM capacity] —
EEPROM [DATA_NEEDED: EEPROM capacity] —
ADC [DATA_NEEDED: ADC specification] —
Timer [DATA_NEEDED: timer specification] —
Serial Interfaces [DATA_NEEDED: serial interface details] —
Maximum I/O Frequency [DATA_NEEDED: maximum I/O frequency] —
Maximum CPU Frequency — 20 MHz
Interrupt and Reset Sources — Up to 32 sources
Low-Power Modes — 2 very-low-power stop modes
Low-Voltage Detection — Supported
Nhiệt độ hoạt động — -40°C to +85°C
Background Debugging — Supported
Breakpoint Capability — Single breakpoint on-chip during in-circuit debugging; additional on-chip breakpoints stated by retrieved data
S08 Core Speed — 40 MHz core speed; 20 MHz bus speed
Manufacturer — NXP Semiconductors
Trạng thái vòng đời — End of Life
RoHS — unknown
REACH — unknown
AEC-Q100 — unknown
Lead-Free — unknown

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá