MPVZ5004G6T1 vs MPVZ5004GW7U So sánh
So sánh chi tiết song song của MPVZ5004G6T1 bằng NXP Semiconductors và MPVZ5004GW7U bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
NXP Semiconductors
MPVZ5004G6T1 - 0-3.92kPa Vented Gauge Pressure Sensor | NXP
MPVZ5004G6T1 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MPVZ5004G6T1 | MPVZ5004GW7U |
|---|---|---|
| Thương hiệu | NXP Semiconductors | NXP Semiconductors |
| Danh mục | Pressure Sensors | Pressure Sensors |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 3.92 kPa (0 to 0.57 PSI) | 0 kPa to 3.92 kPa (0 to 0.57 psi) |
| Maximum Over Pressure | [DATA_NEEDED: maximum over pressure] | — |
| Kiểu đầu ra | Analog Voltage | Analog voltage, ratiometric |
| Khoảng điện áp đầu ra | 1 V to 4.9 V | — |
| Output Span | 3.9 V (typical at 5 V supply) | — |
| Điện áp cung cấp | 5 V typical (5 V max) | 5.0 V (typ) |
| Điện áp cung cấp | [DATA_NEEDED: supply current] | 4 mA typ (per datasheet family) |
| Sensitivity | 1 V/kPa (approx., ratiometric to Vsupply) | approx. 1.0 V / kPa |
| Accuracy | [DATA_NEEDED: accuracy %] | [DATA_NEEDED: linearity/error %] |
| Nhiệt độ hoạt động | 0C to +85C (per Partstack) | 0 °C to 85 °C |
| Kiểu lắp đặt | Surface Mount | Through-Hole (DIP module with tube port) |
| Hộp | 8-SMD Module | 8-DIP Module (Case 1560-02) |
| Port Style | Vented Gauge (rear vent) | — |
| Trạng thái RoHS | Compliant | [DATA_NEEDED: confirm from datasheet] |
| Pressure Port | — | Male 0.22" (5.59 mm) tube, single axial |
| Output Voltage Span | — | 1.0 V to 4.9 V (at 5 V excitation) |
| Output Voltage at 0 kPa | — | 1.0 V typ |
| Storage Temperature | — | [DATA_NEEDED: storage temperature range] |
| Technology | — | Piezoresistive MEMS, monolithic silicon |
| Signal Conditioning | — | On-chip amplifier, temperature-compensated, calibrated |
| Media Compatibility | — | Non-corrosive dry gases (air) |