MPXV10GC7U vs MPVZ5150GC7U So sánh

So sánh chi tiết song song của MPXV10GC7U bằng NXP Semiconductors và MPVZ5150GC7U bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ Hoạt động
NXP Semiconductors
MPVZ5150GC7U MPVZ5150GC7U - 150kPa Vented Gauge Pressure Sensor | NXP

MPVZ5150GC7U - 150kPa Vented Gauge Pressure Sensor | NXP

MPVZ5150GC7U ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MPXV10GC7U MPVZ5150GC7U
Thương hiệu NXP Semiconductors NXP Semiconductors
Danh mục Pressure Sensors Pressure Sensors
Trạng thái vòng đời Hoạt động Hoạt động
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) 0 kPa to 150 kPa (0 PSI to 21.76 PSI)
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] —
Kiểu đầu ra Analog Wheatstone Bridge (uncompensated mV) Analog Voltage (ratiometric)
Full-Scale Output 0 mV to 35 mV at 3 V supply —
Sensitivity 3.5 mV/kPa nominal —
Điện áp cung cấp 3 V to 6 V (3 V typical excitation) 4.75 V to 5.25 V
Điện áp cung cấp [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Input Impedance [DATA_NEEDED: bridge input impedance] —
Output Impedance [DATA_NEEDED: bridge output impedance] —
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40 °C to +125 °C
Port Style Top port, 0.13" (3.18 mm) tube inlet Top Port, Male 0.13" (3.17 mm) Tube
Hộp 8-DIP (0.550", 13.97 mm) through-hole 8-DIP (Case 867F, 10.67 x 10.67 x 12.96 mm)
Kiểu lắp đặt Through-Hole Through Hole
Media Compatibility Dry non-corrosive gases (reference port vented to ambient) Dry air and non-corrosive gases (silicone gel isolation)
Compensation None on chip - external calibration required —
Trạng thái RoHS [DATA_NEEDED: RoHS compliance] Compliant
Maximum Overload Pressure — [DATA_NEEDED: maximum overload pressure]
Khoảng điện áp đầu ra — 0.2 V to 4.7 V
Pressure Accuracy — ±1.5 % (0 °C to 85 °C)
Storage Temperature — [DATA_NEEDED: storage temperature]
Response Time — 1.0 ms (typical)
Technology — Piezoresistive (MEMS) with ASIC signal conditioning

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá