A3P600-1FG484I - ProASIC3 FPGA, 1.5V, 484-FBGA | Microchip
MPN: A3P600-1FG484I ✓ Hoạt độngA3P600-1FG484I Tóm tắt
A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip non-volatile flash memory rather than an external configuration device or volatile SRAM. Within the programmable logic hierarchy (VersaTile logic element -> FPGA -> programmable SoC -> digital system), this architecture gives ProASIC3 devices single-chip, instant-on behavior: the fabric is live immediately at power-up, needs no external boot flash, and is inherently more secure against configuration overwrite than SRAM FPGAs.
Key features include reprogrammable flash fabric supporting secure, low total cost of ownership (Low TOC) designs, four I/O banks (as documented in Microchip's ProASIC3 migration application note) with independent VCCIBx supplies so only I/Os with compatible voltage standards share a bank, and abundant advanced features in a small-footprint package. The 484-ball FBGA provides a high logic-to-I/O ratio for glue logic, bus bridging, and control-plane designs.
Technically, the ProASIC3 fabric is built from VersaTiles, a three-input look-up-based logic cell that can act as combinational logic, sequential logic, or memory, with 1.5V core operation keeping dynamic power low. Because configuration is flash-based, no configuration PROM or microcontroller override circuitry is required at the system level, reducing BOM cost and board area.
Typical applications include industrial automation control, telecommunications line-card glue logic and bus interface, medical instrumentation control, aerospace/defense subsystems (where the same family seeds radiation-tolerant RTAX designs), and legacy system life-extension where a single-chip, instant-on FPGA replaces multiple ASSPs.
Design consideration: verify that I/O standards with different voltage requirements are assigned to separate I/O banks, since each bank has a dedicated VCCIB supply; the FG484 package exposes four banks per the family migration note.
This page synthesizes distributor pricing data, verified same-package drop-in alternatives from the XAIPART catalog, and practical design notes not found in the manufacturer datasheet. Pricing shown is as of 2026-09-01.
Bộ thay thế dễ dàng lắp đặt cho A3P600-1FG484I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với A3P600-1FG484I (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Package, Configuration Memory, System Gates, I/O Banks.
A3P600-1FGG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600-2FGG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600-FG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600L-1FG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600-2FG484
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600-1FG484I Tỷ lệ tối đa & tính chất điện
| Family | ProASIC3 |
| System Gates | 600000 |
| Number of I/O | 235 |
| Total Memory Bits | 110592 |
| Core Supply Voltage | 1.5 V |
| Speed Grade | -1 |
| Hộp | 484-Ball FBGA (FG484) |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40C to +100C (Industrial) |
| Programmability Type | Flash-based, reprogrammable, in-system |
| Configuration Storage | On-chip flash (single-chip, no external boot device) |
| I/O Banks | 4 |
| Logic Element | VersaTile (3-input LUT-based) |
Hướng dẫn cấu hình chân A3P600-1FG484I 484-ball fbga (fg484)
Cấu hình chân cho A3P600-1FG484I (484-ball fbga (fg484) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho A3P600-1FG484I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
A3P600-1FG484I phù hợp cho 6 Áp dụngs: Industrial Automation Control, Telecommunications Line Cards, Medical Instrumentation Control, Aerospace and Defense Subsystems, Legacy System Life Extension, Test and Measurement Fixtures.
Industrial Automation Control
The A3P600-1FG484I's industrial -40C to +100C rating and instant-on flash configuration make it well suited to PLC I/O modules, motor control sequencing, and factory-floor interface boards where the FPGA must be active the moment power is applied. Its 235 user I/Os in the 484-ball FBGA provide dense parallel interface capability for sensor arrays, relay banks, and legacy field buses. The four independent I/O banks (dedicated VCCIB per bank, per Microchip's migration application note) let designers mix 3.3V, 2.5V, and 1.8V signal standards on one device without level shifters, reducing BOM cost and board area versus multi-chip solutions.
Được đề xuất
Telecommunications Line Cards
In telecom line-card and backplane designs, the A3P600-1FG484I serves as bus bridging, framer glue logic, and control-plane interconnect. The 600K-gate flash fabric and 110592 memory bits support modest FIFOs, register banks, and state machines, while 235 I/Os handle wide parallel buses to PHYs and processors. Because configuration lives in on-chip flash, no configuration PROM occupies board space or boots during link bring-up - the FPGA is functional at first clock. The 1.5V core keeps dynamic power low for always-on carrier equipment, and the industrial grade supports outdoor plant and uncontrolled-environment racks.
Được đề xuất
Medical Instrumentation Control
Medical diagnostic and monitoring equipment benefits from the A3P600-1FG484I's deterministic instant-on behavior and single-chip configuration security - the flash fabric cannot be silently overwritten like SRAM FPGAs. Typical roles include front-end ADC sequencing, display interface glue logic, and motor/sensor control in analyzers and imaging subsystems. The 484-ball FBGA footprint supports fine-pitch two-side PCB assembly common in compact instrument stacks, while four I/O banks accommodate mixed-voltage sensor and display standards. Designers should confirm IEC 60601-1 system-level requirements independently; the FPGA's role is deterministic, secure control logic with predictable power-up.
Được đề xuất
Aerospace and Defense Subsystems
The ProASIC3 flash architecture is the commercial ancestor of Microchip's radiation-tolerant RTAX family, making A3P600-1FG484I a natural prototyping and ground-equipment companion for space-qualified RTAX2000S/RTAX4000S designs. Engineers can develop and validate logic on the low-cost commercial flash FPGA, then retarget the RTAX device for flight hardware, since both use Actel-originated fabric and toolchains. Typical ground-segment uses include test benches, evaluation fixtures, and non-flight control electronics where flash configuration security (no external bitstream exposure) and instant-on operation are valued. The industrial temperature rating supports extended-temperature ground stations and range equipment.
Được đề xuất
Legacy System Life Extension
When obsolete ASSPs, PALs/GALs, or discontinued SRAM FPGAs must be replaced, the A3P600-1FG484I consolidates dispersed glue logic into a single reprogrammable flash device with low total cost of ownership (Microchip's stated 'Low TOC' design goal). Its 235 I/Os and 484-ball FBGA map well to legacy wide-bus boards, and reprogrammability allows firmware-style iteration without board respins. Instant-on flash configuration preserves the deterministic power-up behavior that legacy TTL/PAL designs depended on - no configuration delay or external boot memory. This makes the device a common choice for maintaining industrial, telecom, and defense platforms built decades ago.
Được đề xuất
Test and Measurement Fixtures
Bench and production test equipment uses the A3P600-1FG484I for channel multiplexing, timing/strobe generation, and protocol adaptation between the unit under test and the host controller. The 600K-gate fabric with 110592 memory bits implements pattern buffers and capture FIFOs, while 235 I/Os support dense probing of parallel buses. The -1 speed grade suffices for most stimulus/capture roles, and the industrial rating tolerates unconditioned production-floor environments. Because the flash fabric is live at power-up, fixtures begin running immediately without configuration-file load delays, improving throughput in high-cycle automated test cells.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A3P600-1FG484I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A3P600-1FGG484I | A3P600-2FGG484I | A3P600-FG484I | A3P600L-1FG484I | A3P600-2FG484 |
|---|---|---|---|---|---|---|
| Package | 484-Ball FBGA (FG484) | 484-Ball FBGA (FG484) - same | 484-Ball FBGA (FG484) - same | 484-Ball FBGA (FG484) - same | 484-Ball FBGA (FG484) - same | 484-Ball FBGA (FG484) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600000 | 600000 | 600000 | 600000 | 600000 | 600000 |
| User I/O | 235 | 235 | 235 | 235 | 235 | 235 |
| Memory Bits | 110592 | 110592 | 110592 | 110592 | 110592 | 110592 |
| Speed Grade | -1 | -1 | -2 (faster) | Standard | -1 | -2 (faster) |
| Power Characteristic | Standard (1.5 V core) | Standard | Standard | Standard | Low-power (L variant) | Standard |
| Packaging Material | Standard | Green (halogen-free) | Green (halogen-free) | Standard | Standard | Standard |
Bảo phân biệt quan trọng
- Single-chip flash configuration - no external boot device (vsA3P600-2FGG484I)
- Low-power variant available in same footprint (vsA3P600L-1FG484I)
- Speed grade trade-off (vsA3P600-2FGG484I)
Ghi chú thiết kế
The A3P600-1FG484I uses a 1.5V core (VCC) plus independent I/O bank supplies (VCCIB0-VCCIB3). Per Microchip's ProASIC3 migration application note, the FG484 package routes VCCIBx pins through four I/O banks, and only I/Os with compatible voltage standards may share a bank. Plan your bank assignment before pin locking: mixing 3.3V and 1.8V standards in one bank is not possible without changing VCCIB for the whole bank. Sequencing between core and I/O supplies should follow the ProASIC3 datasheet power-up guidance to avoid latch-up during startup.
The 484-ball FBGA requires a carefully planned via escape strategy. Use a minimum of four signal layers with via-in-pad or dog-bone escapes on a 0.8-1.0 mm ball pitch, and dedicate continuous planes for the 1.5V core rail. Because the flash fabric is live immediately at power-up, ensure power rails are well decoupled before the core voltage stabilizes - place bulk and 0.1uF decoupling capacitors close to each supply ball group per the manufacturer datasheet layout guidance.
Do not assume a generic FBGA-484 ball map: only 235 of the 484 balls are user I/Os, and the remaining balls are dedicated power, ground, and configuration pins. Always generate your pin constraints from Microchip's official A3P600 FG484 ball-map file in Libero SoC. Also verify speed-grade timing: a design meeting timing on a -2 device may fail on the -1 A3P600-1FG484I, so run static timing analysis after any speed-grade substitution.
Thông tin tuân thủ
Compliance status not stated in the retrieved web data; the FGG (green) package variants within the same family denote Microchip's halogen-free packaging option. Verify RoHS/REACH status on the official Microchip product page before export-controlled or regulated builds.