AD532KHZ - 4-Bit, 1 MHz Analog Multiplier | Analog Devices
MPN: AD532KHZ ✗ Cuối đờiAD532KHZ Tóm tắt
An analog multiplier is a specialized amplifier or integrated circuit that produces an output proportional to the product of two input voltages. Its functional hierarchy extends from analog multiplier to analog computing IC, signal-processing IC, and integrated circuit. A divider operation can be implemented by placing a resistor in the feedback path of the multiplier, allowing one input to establish a scaling ratio while the other supplies the signal being scaled.
The AD532KHZ combines a 4-bit resolution classification with 1 MHz bandwidth and internal trimming. Internal trimming reduces the need for external calibration of multiplier accuracy, while the hermetic TO-100-10 package supports operation in demanding industrial and legacy instrumentation environments. Its primary electrical characteristics are specified in the Analog Devices manufacturer datasheet, including gain accuracy, linearity, bandwidth, supply requirements, input ranges, and temperature behavior.
Analog Devices identifies AD532 as not recommended for new designs, so the part should be selected primarily for repair, continuation, or redesign of an existing AD532-based circuit. Hermetic packaging and stable multiplication characteristics remain valuable where an established circuit footprint, test methodology, or qualified supply chain is required. Before replacing the device, verify the original grade suffix, operating temperature range, supply voltage, pin orientation, and external resistor network.
Typical uses include four-quadrant multipliers in analog control loops, precision dividers in feedback networks, amplitude-control circuits, synchronous demodulation stages, and laboratory instrumentation. The 1 MHz bandwidth supports signal chains operating well above audio frequency, although practical system bandwidth also depends on the external resistor network, source impedance, load, and compensation or trimming components.
The primary design consideration is to reproduce the original application circuit rather than redesign around generic equations. Maintain the manufacturer-specified bypass capacitors, resistor tolerances, pin connections, and grounding arrangement. The TO-100 package requires adequate lead-bend clearance and PCB spacing, and its thermal performance depends on the board-level copper area and airflow.
This page combines the device identity, package information, lifecycle status, verified source links, drop-in candidates, and engineering guidance needed to evaluate the AD532KHZ for maintenance and controlled redesign applications.
Bộ thay thế dễ dàng lắp đặt cho AD532KHZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD532KHZ (cùng hình factor và footprint) — khác nhau ở Package, Product Type.
AD532JHZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD532SH/883B
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD532JNZ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
AD532KNZ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
AD532JH
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →AD532KHZ Tỷ lệ tối đa & tính chất điện
| Product Type | Analog multiplier/divider IC |
| Multiplier Architecture | 4-quadrant |
| Resolution Classification | 4 bit |
| Bandwidth | 1 MHz |
| Trim Type | Internally trimmed |
| Hộp | 10-pin TO-100 hermetically sealed metal can |
| Total Pin Count | 10 pins |
| Kiểu lắp đặt | Through-hole |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| Lifecycle Recommendation | Not recommended for new designs |
Hướng dẫn cấu hình chân AD532KHZ 10-pin to-100 hermetically sealed metal can
Cấu hình chân cho AD532KHZ (10-pin to-100 hermetically sealed metal can gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD532KHZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD532KHZ phù hợp cho 6 Áp dụngs: Four-Quadrant Analog Control, Precision Analog Divider, Amplitude and Gain Control, Synchronous Demodulation, Laboratory Instrumentation, Legacy Equipment Maintenance.
Four-Quadrant Analog Control
The AD532KHZ is appropriate for four-quadrant control because its 1 MHz bandwidth permits operation above baseband audio frequencies while supporting input combinations of either polarity. The multiplier can form the nonlinear product term required in analog computation, loop compensation, and plant-modeling circuits. Preserve the manufacturer reference network and external resistor accuracy because the device's multiplication error, common-mode range, and output swing determine usable control accuracy. The hermetic TO-100-10 package also fits legacy control assemblies where an established mechanical footprint and circuit-board spacing are already present.
Được đề xuất
Precision Analog Divider
AD532KHZ can implement an analog divider when one input is connected to a precision reference and the other is routed through the appropriate feedback arrangement. Its 4-quadrant multiplier core provides consistent behavior across signal polarities, while the 1 MHz bandwidth leaves useful margin for control and instrumentation bandwidths below that limit. Divider accuracy depends on the external resistor network as well as the IC, so use the manufacturer reference values and confirm thermal drift, common-mode headroom, and output loading before assigning a system accuracy target.
Được đề xuất
Amplitude and Gain Control
The AD532KHZ fits amplitude-control and programmable-gain analog blocks because multiplying a signal by a controlled reference produces the required scaled output. Its 1 MHz bandwidth supports modulation, servo, and instrumentation loops beyond audio-bandwidth requirements. In an implementation, the gain-control reference should remain within the specified input range and exhibit low noise and stable temperature behavior. External resistor matching and trimming directly affect multiplier accuracy, so production designs should preserve the reference layout and account for excitation-level changes when determining linearity across the operating range.
Được đề xuất
Synchronous Demodulation
AD532KHZ can serve as the multiplication element in a synchronous-demodulation chain, where a carrier or reference is multiplied by the incoming modulated signal. The 1 MHz bandwidth is sufficient for many low-frequency instrumentation and communications control paths, and the four-quadrant capability allows bipolar reference and signal combinations. Practical demodulator performance depends on input amplitude, common-mode limits, filter design, and phase accuracy. Place the subsequent filter according to the manufacturer application guidance and use a stable reference source to avoid adding amplitude noise or drift to the recovered baseband signal.
Được đề xuất
Laboratory Instrumentation
The AD532KHZ is useful in legacy laboratory instruments that require analog multiplication for calibration, ratio measurement, signal generation, or closed-loop control. Its 1 MHz bandwidth covers precision audio, low-frequency communications, and industrial test functions, while the hermetic TO-100-10 package supports established instrument designs. The internal trim reduces external calibration complexity, but accuracy still depends on the reference resistors, excitation stability, and output measurement method. For instrument redesign, reproduce the original pin connection and component layout and confirm that the selected grade satisfies the enclosure's temperature and reliability requirements.
Được đề xuất
Legacy Equipment Maintenance
The AD532KHZ is particularly relevant to maintenance of legacy analog equipment because the TO-100-10 package, 4-quadrant operation, and 1 MHz bandwidth define a recognizable functional role in multiplier-based circuits. Analog Devices marks AD532 as not recommended for new designs, making replacement continuity more defensible than adopting an unverified modern substitute. During board repair, check all supply pins and signal inputs against the manufacturer pin table, preserve bypass routing, and compare the installed suffix with the replacement grade. If a documented same-package option is used, verify temperature range and qualification rather than relying on package shape alone.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD532KHZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD532JHZ | AD532SH/883B | AD532JNZ | AD532KNZ | AD532JH |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | TO-100-10 | TO-100-10 | TO-100-10 | TO-100-10 | TO-100-10 | TO-100-10 |
| Product Type | Analog multiplier/divider | Analog multiplier/divider | Analog multiplier/divider | Analog multiplier/divider | Analog multiplier/divider | Analog multiplier/divider |
| Multiplier Architecture | 4-quadrant | 4-quadrant | 4-quadrant | 4-quadrant | 4-quadrant | 4-quadrant |
| Bandwidth | 1 MHz | 1 MHz | 1 MHz | 1 MHz | 1 MHz | 1 MHz |
| Resolution Classification | 4 bit | 4 bit | 4 bit | 4 bit | 4 bit | 4 bit |
| Trim Type | Internally trimmed | Internally trimmed | Internally trimmed | Internally trimmed | Internally trimmed | Internally trimmed |
Bảo phân biệt quan trọng
- Documented complete replacement path (vsAD532JHZ)
- Screened high-reliability option (vsAD532SH/883B)
- Established 4-quadrant performance class (vsAD532JH)
Ghi chú thiết kế
Reproduce the original TO-100-10 footprint, pin-1 orientation, and lead spacing before upgrading a legacy board. Keep the external multiplier and feedback components close to the relevant pins, use the manufacturer reference resistor values and tolerances, and retain short, low-loop-area routing around the analog inputs. Because the package has ten leads, verify every connection against the AD532 manufacturer pin-description table rather than relying on a generic TO-100 drawing.
Do not interpret the 4-bit classification as a digital data converter. The AD532KHZ is an analog multiplier whose accuracy is governed by gain error, nonlinearity, common-mode range, output swing, external resistor ratios, and signal amplitude. Likewise, the 1 MHz bandwidth does not guarantee usable accuracy at every frequency or output level. Reproduce the manufacturer's typical application circuit, preserve its trimming arrangement, and verify excitation and load conditions before declaring the replacement electrically equivalent.
Identify all supply and ground connections from the manufacturer datasheet and measure them before inserting AD532KHZ. Place bypass capacitors adjacent to the intended supply pins and maintain a low-impedance return path, since supply disturbances can appear in the multiplied output. Do not infer the supply voltage from generic multiplier documentation; check the exact AD532 grade and manufacturer absolute-maximum table before energizing a board.
The hermetic TO-100 package can dissipate heat from internal bias circuitry and from signal-dependent output loading. In a sealed instrument, provide airflow or copper area appropriate for the measured dissipation and avoid mounting the device against a heat-insulating panel. For new thermal calculations, record ambient temperature, package dissipation, and board construction first, then use the manufacturer's thermal information rather than estimating junction temperature from the package name alone.
Keep both multiplier inputs within their specified common-mode range and provide low source impedance to limit gain errors at the 1 MHz bandwidth limit. Terminate unused inputs according to the manufacturer guidance, and avoid long parallel traces that can couple the multiplication channels. If the application includes demodulation or precision gain control, use a clean reference source and account for amplitude, phase, and filter behavior across the complete signal bandwidth.
Thông tin tuân thủ
The AD532 family is an older analog multiplier/divider and the product page states that AD532 is not recommended for new designs. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified for AD532KHZ.