Analog Devices

AD532KHZ - 4-Bit, 1 MHz Analog Multiplier | Analog Devices

料号: AD532KHZ ✗ 停产
10-pin TO-100 hermetically sealed metal can Package
最小起订量: 1 |

AD532KHZ 概述

The Analog Devices AD532KHZ is an internally trimmed, 4-quadrant analog multiplier/divider with 1 MHz bandwidth, packaged in a hermetically sealed 10-pin TO-100 metal can. It performs multiplication and division of analog signals through balanced, precision-matched circuitry. The four-quadrant architecture supports operation across both input polarities, making the device useful in modulation, control, signal-conditioning, analog-computation, and instrumentation systems.

An analog multiplier is a specialized amplifier or integrated circuit that produces an output proportional to the product of two input voltages. Its functional hierarchy extends from analog multiplier to analog computing IC, signal-processing IC, and integrated circuit. A divider operation can be implemented by placing a resistor in the feedback path of the multiplier, allowing one input to establish a scaling ratio while the other supplies the signal being scaled.

The AD532KHZ combines a 4-bit resolution classification with 1 MHz bandwidth and internal trimming. Internal trimming reduces the need for external calibration of multiplier accuracy, while the hermetic TO-100-10 package supports operation in demanding industrial and legacy instrumentation environments. Its primary electrical characteristics are specified in the Analog Devices manufacturer datasheet, including gain accuracy, linearity, bandwidth, supply requirements, input ranges, and temperature behavior.

Analog Devices identifies AD532 as not recommended for new designs, so the part should be selected primarily for repair, continuation, or redesign of an existing AD532-based circuit. Hermetic packaging and stable multiplication characteristics remain valuable where an established circuit footprint, test methodology, or qualified supply chain is required. Before replacing the device, verify the original grade suffix, operating temperature range, supply voltage, pin orientation, and external resistor network.

Typical uses include four-quadrant multipliers in analog control loops, precision dividers in feedback networks, amplitude-control circuits, synchronous demodulation stages, and laboratory instrumentation. The 1 MHz bandwidth supports signal chains operating well above audio frequency, although practical system bandwidth also depends on the external resistor network, source impedance, load, and compensation or trimming components.

The primary design consideration is to reproduce the original application circuit rather than redesign around generic equations. Maintain the manufacturer-specified bypass capacitors, resistor tolerances, pin connections, and grounding arrangement. The TO-100 package requires adequate lead-bend clearance and PCB spacing, and its thermal performance depends on the board-level copper area and airflow.

This page combines the device identity, package information, lifecycle status, verified source links, drop-in candidates, and engineering guidance needed to evaluate the AD532KHZ for maintenance and controlled redesign applications.

直接替换替代料: AD532KHZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: AD532KHZ (相同外形与封装尺寸) ——差异在于 Package, Product Type.

Analog Devices
Package: 10-pin TO-100
Product Type: Internally trimmed integrated circuit multiplier
对比 AD532KHZ →

AD532JHZ

✅ 直接替换
Analog Devices
📦 TO-100-10
Internally trimmed integrated circuit multiplier · Four-quadrant analog multiplication · Supported by analog feedback configuration · ±15 V · 25 °C · 2 kΩ · Grounded unless otherwise noted · 10-pin TO-100

联系询价

查看数据手册 →

AD532SH/883B

✅ 直接替换
📦 TO-100-10
Same 4-quadrant multiplier and 1 MHz bandwidth class; adds MIL-STD-883 screening, with no stated bandwidth or resolution difference

📋 参考替代料(不在目录中)

AD532JNZ

✅ 直接替换 ⚠️ 规格未核验
📦 TO-100-10
Same 4-quadrant, 4-bit-class multiplier architecture and 1 MHz bandwidth class; ordering and temperature-grade details differ

📋 参考替代料(不在目录中)

AD532KNZ

✅ 直接替换 ⚠️ 规格未核验
📦 TO-100-10
Same 4-quadrant, 4-bit-class multiplier architecture and 1 MHz bandwidth class; ordering and temperature-grade details differ

📋 参考替代料(不在目录中)

AD532JH

✅ 直接替换 ⚠️ 规格未核验
Analog Devices
📦 TO-100-10
Internally trimmed integrated-circuit analog multiplier · Analog multiplier or divider · 1 MHz · 45 V · 45 V/us · Internally trimmed · Commercial

联系询价

查看数据手册 →

AD532KHZ 最大额定值与电气特性

Product Type Analog multiplier/divider IC
Multiplier Architecture 4-quadrant
Resolution Classification 4 bit
Bandwidth 1 MHz
Trim Type Internally trimmed
封装 10-pin TO-100 hermetically sealed metal can
Total Pin Count 10 pins
安装类型 Through-hole
RoHS 状态 unknown
REACH Status unknown
Lifecycle Recommendation Not recommended for new designs

AD532KHZ 10-pin to-100 hermetically sealed metal can 引脚配置指南

AD532KHZ(10-pin to-100 hermetically sealed metal can 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AD532KHZ 的 10-pin to-100 hermetically sealed metal can 封装引脚图

暂无详细引脚数据: AD532KHZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AD532KHZ 适用于 6 应用s: Four-Quadrant Analog Control, Precision Analog Divider, Amplitude and Gain Control, Synchronous Demodulation, Laboratory Instrumentation, Legacy Equipment Maintenance.

🏭

Four-Quadrant Analog Control

The AD532KHZ is appropriate for four-quadrant control because its 1 MHz bandwidth permits operation above baseband audio frequencies while supporting input combinations of either polarity. The multiplier can form the nonlinear product term required in analog computation, loop compensation, and plant-modeling circuits. Preserve the manufacturer reference network and external resistor accuracy because the device's multiplication error, common-mode range, and output swing determine usable control accuracy. The hermetic TO-100-10 package also fits legacy control assemblies where an established mechanical footprint and circuit-board spacing are already present.

🔧

Precision Analog Divider

AD532KHZ can implement an analog divider when one input is connected to a precision reference and the other is routed through the appropriate feedback arrangement. Its 4-quadrant multiplier core provides consistent behavior across signal polarities, while the 1 MHz bandwidth leaves useful margin for control and instrumentation bandwidths below that limit. Divider accuracy depends on the external resistor network as well as the IC, so use the manufacturer reference values and confirm thermal drift, common-mode headroom, and output loading before assigning a system accuracy target.

📡

Amplitude and Gain Control

The AD532KHZ fits amplitude-control and programmable-gain analog blocks because multiplying a signal by a controlled reference produces the required scaled output. Its 1 MHz bandwidth supports modulation, servo, and instrumentation loops beyond audio-bandwidth requirements. In an implementation, the gain-control reference should remain within the specified input range and exhibit low noise and stable temperature behavior. External resistor matching and trimming directly affect multiplier accuracy, so production designs should preserve the reference layout and account for excitation-level changes when determining linearity across the operating range.

🌐

Synchronous Demodulation

AD532KHZ can serve as the multiplication element in a synchronous-demodulation chain, where a carrier or reference is multiplied by the incoming modulated signal. The 1 MHz bandwidth is sufficient for many low-frequency instrumentation and communications control paths, and the four-quadrant capability allows bipolar reference and signal combinations. Practical demodulator performance depends on input amplitude, common-mode limits, filter design, and phase accuracy. Place the subsequent filter according to the manufacturer application guidance and use a stable reference source to avoid adding amplitude noise or drift to the recovered baseband signal.

🖥️

Laboratory Instrumentation

The AD532KHZ is useful in legacy laboratory instruments that require analog multiplication for calibration, ratio measurement, signal generation, or closed-loop control. Its 1 MHz bandwidth covers precision audio, low-frequency communications, and industrial test functions, while the hermetic TO-100-10 package supports established instrument designs. The internal trim reduces external calibration complexity, but accuracy still depends on the reference resistors, excitation stability, and output measurement method. For instrument redesign, reproduce the original pin connection and component layout and confirm that the selected grade satisfies the enclosure's temperature and reliability requirements.

🔧

Legacy Equipment Maintenance

The AD532KHZ is particularly relevant to maintenance of legacy analog equipment because the TO-100-10 package, 4-quadrant operation, and 1 MHz bandwidth define a recognizable functional role in multiplier-based circuits. Analog Devices marks AD532 as not recommended for new designs, making replacement continuity more defensible than adopting an unverified modern substitute. During board repair, check all supply pins and signal inputs against the manufacturer pin table, preserve bypass routing, and compare the installed suffix with the replacement grade. If a documented same-package option is used, verify temperature range and qualification rather than relying on package shape alone.

What is the AD532KHZ?
The AD532KHZ is an internally trimmed, 4-quadrant analog multiplier/divider IC with 1 MHz bandwidth in a hermetically sealed 10-pin TO-100 package. According to the Analog Devices AD532 manufacturer datasheet, its balanced multiplication architecture supports analog-signal multiplication and resistor-programmed division. The device is intended for precision signal conditioning, control, modulation, instrumentation, and legacy system maintenance.
What is the operating voltage of AD532KHZ?
The AD532KHZ operating supply voltage must be taken from the supply pins and absolute-maximum ratings in the Analog Devices AD532 manufacturer datasheet. The product listing identifies the device as a 10-pin TO-100 analog multiplier/divider with 1 MHz bandwidth. Before applying power, confirm the exact supply arrangement and input/output limits because they are not established by the catalog listing alone.
Where can I download the AD532KHZ datasheet PDF?
The AD532KHZ datasheet and supporting documents are available through the official Analog Devices AD532 product page at https://www.analog.com/en/products/ad532.html. The manufacturer page identifies AD532 as not recommended for new designs and provides the product data sheet. Use the manufacturer document for the exact electrical characteristics, pin description, application circuit, and ordering information relevant to AD532KHZ.
Where is the AD532KHZ pinout?
The AD532KHZ pinout is defined in the pin-description section of the Analog Devices AD532 manufacturer datasheet. The device uses a 10-pin TO-100 hermetically sealed package, with pin 1 and the package orientation identified by the manufacturer drawing. Use that pin table before assigning PCB tracks or replacing the original assembly in a maintained circuit.
Is AD532KHZ suitable for new designs?
The AD532KHZ is generally unsuitable for new production designs because Analog Devices marks AD532 as not recommended for new designs. The device remains useful for repair, continuity, and controlled redesign of an existing circuit. According to the manufacturer product page, the AD532 family is an internally trimmed integrated-circuit multiplier, and its established TO-100 implementation should be matched carefully during maintenance.
What can replace AD532KHZ?
AD532JHZ is a documented same-brand replacement candidate for AD532KHZ because its terminals and package are consistent and a replacement does not require circuit modification. AD532SH/883B is another qualified AD532-family candidate for applications requiring screened high-reliability construction. Confirm temperature grade, supply limits, accuracy, and external component values against the manufacturer datasheet before substitution.
Is AD532KHZ the same as AD532JHZ?
AD532KHZ and AD532JHZ use the same 10-pin TO-100 multiplier/divider architecture, and a published comparison describes AD532JHZ as a complete replacement with consistent terminals and package. Their grade and ordering codes may indicate different qualification or environmental requirements. Confirm the exact temperature range and reliability screening for the replacement rather than relying on package appearance alone.
AD532KHZ vs AD532JHZ: which is better for a legacy analog control board?
AD532JHZ is the stronger choice when its documented temperature grade and reliability conditions match the legacy analog control board because it is described as a complete replacement with matching terminals and package. AD532KHZ remains appropriate when continuity with the originally approved part is mandatory. Compare gain error, nonlinearity, bandwidth, supply voltage, and temperature limits before finalizing the substitution.
When should I choose AD532KHZ over AD532SH/883B?
Choose AD532KHZ when maintaining an established commercial or industrial circuit whose original qualification does not require the additional screening associated with AD532SH/883B. Choose AD532SH/883B when the system specification calls for screened high-reliability construction. Both belong to the AD532 multiplier family, but the exact grade, temperature range, and procurement requirements determine the appropriate choice.
Is AD532KHZ suitable for analog signal conditioning?
The AD532KHZ is suitable for analog signal conditioning when the required operating frequency is within its 1 MHz bandwidth and the external network preserves the manufacturer's accuracy limits. Its 4-quadrant architecture is useful for bipolar multiplication, amplitude control, and divider applications. The system designer must also verify common-mode range, output swing, source impedance, and resistor tolerances.
How does the AD532KHZ perform division?
The AD532KHZ performs division by using the analog multiplier with a defined feedback or reference network so that one input establishes a scaling ratio and the other supplies the signal being scaled. Exact resistor values and compensation must follow the manufacturer application circuit. The 1 MHz bandwidth of the device sets an upper bound, while practical accuracy also depends on resistor tolerance and signal amplitude.
What are the key specifications of AD532KHZ that engineers should know?
The key AD532KHZ specifications are 4-quadrant analog multiplication, 4-bit resolution classification, 1 MHz bandwidth, internal trimming, and a hermetically sealed 10-pin TO-100 package. Analog Devices identifies the device as an internally trimmed integrated-circuit multiplier. The complete operating limits, gain accuracy, nonlinearity, supply requirements, and temperature range are defined in the AD532 manufacturer datasheet.
What is the best Analog Devices equivalent for AD532KHZ?
AD532JHZ is the best documented Analog Devices equivalent because a published comparison describes it as a complete replacement with consistent terminals and package characteristics. AD532SH/883B provides another AD532-family option for screened high-reliability applications. The final choice must preserve the 4-quadrant multiplier function, 1 MHz bandwidth class, pinout, temperature grade, and required supply conditions.
Can AD532KHZ be used for four-quadrant multiplication?
Yes, AD532KHZ is a four-quadrant analog multiplier/divider and can process input combinations with positive and negative polarities when operated within its specified electrical limits. The Analog Devices manufacturer datasheet identifies the AD532 family as a 4-quadrant multiplier with 1 MHz bandwidth. Input magnitude, common-mode limits, supply voltage, and feedback components remain critical operating constraints.
Where to buy AD532KHZ and what is its lead time?
Use the Request a Quote form on this page to ask about AD532KHZ availability, current lead time, minimum order quantity, and authorized sourcing. Because AD532 is marked not recommended for new designs, availability may depend on remaining factory inventory or qualified distribution. The manufacturer lists the product as a 10-pin TO-100 internally trimmed multiplier, so include the exact suffix AD532KHZ in any sourcing request.

工程参考数据: AD532KHZ ——对比、设计指导和合规信息。

选型指南

Choose AD532KHZ when maintaining an existing AD532-based system and the installed grade, temperature range, and manufacturer configuration must remain consistent. AD532JHZ is the preferred documented drop-in candidate when a direct same-package replacement is needed because its terminals and package are reported as consistent. AD532SH/883B is the stronger choice when the system specification requires MIL-STD-883 Level B screening. AD532JNZ, AD532KNZ, and AD532JH belong to the same multiplier family and may fit maintenance inventories, but their exact temperature, qualification, and ordering conditions should be checked before use. None should be selected solely by package shape. Verify pin assignments, supply voltage, input range, gain error, linearity, bandwidth, and the original external resistor network in every case.

与替代料对比

参数 本产品 AD532JHZ AD532SH/883B AD532JNZ AD532KNZ AD532JH
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package TO-100-10 TO-100-10 TO-100-10 TO-100-10 TO-100-10 TO-100-10
Product Type Analog multiplier/divider Analog multiplier/divider Analog multiplier/divider Analog multiplier/divider Analog multiplier/divider Analog multiplier/divider
Multiplier Architecture 4-quadrant 4-quadrant 4-quadrant 4-quadrant 4-quadrant 4-quadrant
Bandwidth 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz
Resolution Classification 4 bit 4 bit 4 bit 4 bit 4 bit 4 bit
Trim Type Internally trimmed Internally trimmed Internally trimmed Internally trimmed Internally trimmed Internally trimmed

关键差异点

  • Documented complete replacement path (对比 AD532JHZ)
  • Screened high-reliability option (对比 AD532SH/883B)
  • Established 4-quadrant performance class (对比 AD532JH)

设计说明

Reproduce the original TO-100-10 footprint, pin-1 orientation, and lead spacing before upgrading a legacy board. Keep the external multiplier and feedback components close to the relevant pins, use the manufacturer reference resistor values and tolerances, and retain short, low-loop-area routing around the analog inputs. Because the package has ten leads, verify every connection against the AD532 manufacturer pin-description table rather than relying on a generic TO-100 drawing.

Do not interpret the 4-bit classification as a digital data converter. The AD532KHZ is an analog multiplier whose accuracy is governed by gain error, nonlinearity, common-mode range, output swing, external resistor ratios, and signal amplitude. Likewise, the 1 MHz bandwidth does not guarantee usable accuracy at every frequency or output level. Reproduce the manufacturer's typical application circuit, preserve its trimming arrangement, and verify excitation and load conditions before declaring the replacement electrically equivalent.

Identify all supply and ground connections from the manufacturer datasheet and measure them before inserting AD532KHZ. Place bypass capacitors adjacent to the intended supply pins and maintain a low-impedance return path, since supply disturbances can appear in the multiplied output. Do not infer the supply voltage from generic multiplier documentation; check the exact AD532 grade and manufacturer absolute-maximum table before energizing a board.

The hermetic TO-100 package can dissipate heat from internal bias circuitry and from signal-dependent output loading. In a sealed instrument, provide airflow or copper area appropriate for the measured dissipation and avoid mounting the device against a heat-insulating panel. For new thermal calculations, record ambient temperature, package dissipation, and board construction first, then use the manufacturer's thermal information rather than estimating junction temperature from the package name alone.

Keep both multiplier inputs within their specified common-mode range and provide low source impedance to limit gain errors at the 1 MHz bandwidth limit. Terminate unused inputs according to the manufacturer guidance, and avoid long parallel traces that can couple the multiplication channels. If the application includes demodulation or precision gain control, use a clean reference source and account for amplitude, phase, and filter behavior across the complete signal bandwidth.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The AD532 family is an older analog multiplier/divider and the product page states that AD532 is not recommended for new designs. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified for AD532KHZ.

数据核验日期: 2026-11-18 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AD532KHZ datasheet AD532KHZ datasheet pdf AD532KHZ pinout AD532KHZ specifications AD532KHZ equivalent AD532KHZ replacement AD532KHZ cross reference AD532KHZ vs AD532JHZ AD532KHZ TO-100-10 multiplier AD532KHZ 1 MHz analog multiplier AD532KHZ price AD532KHZ stock Analog Devices AD532KHZ AD532KHZ application circuit

相关元器件 & 术语

Analog Devices AD532 AD532KHZ AD532JHZ AD532SH/883B AD532JNZ AD532KNZ AD532JH analog multiplier analog divider four-quadrant multiplier analog computing IC signal-processing IC integrated circuit 1 MHz bandwidth 4-bit resolution classification internal trimming TO-100-10 hermetic metal can through-hole package MIL-STD-883 Level B screening analog control loop synchronous demodulation signal conditioning laboratory instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情