Analog Devices

AD704AR-16 - Quad Picoamp Input Bipolar Op Amp | Analog Devices

MPN: AD704AR-16 ✓ Hoạt động
Approximately 1.5 mA per amplifier Vdss Picoampere level at room temperature Id 16-lead SOIC Package
MOQ: 1 |

AD704AR-16 Tóm tắt

The Analog Devices AD704AR-16 is a quad, low-power bipolar operational amplifier featuring picoampere-class input bias current, an 800 kHz gain-bandwidth product, and approximately 1.5 mA supply current per amplifier. The device is packaged in a 16-lead SOIC and is intended for precision signal conditioning where low input bias current must coexist with low drift over temperature.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The AD704 belongs to the precision-amplifier hierarchy, using bipolar input transistors rather than conventional junction-field-effect transistors. Its superbeta bipolar input stage provides picoampere input bias current at room temperature while maintaining better bias-current temperature stability than a typical BiFET input amplifier.

The AD704AR-16 provides four amplifiers in one 16-lead SOIC, reducing external component count in multi-channel sensor, measurement, and current-to-voltage circuits. Its 800 kHz gain-bandwidth product supports precision signal processing at moderate frequencies, while low power consumption of approximately 1.5 mA per amplifier suits battery-operated instrumentation and portable measurement systems.

The superbeta input architecture also limits input bias-current drift as temperature rises. Analog Devices states that the AD704 input bias current typically increases by only about five times at 125°C, a characteristic that helps preserve measurement accuracy in elevated-temperature industrial environments. Because a low bias current alone does not guarantee good accuracy, the circuit must still account for input offset voltage, offset drift, noise, common-mode range, and output-current capability.

Typical uses include pH and electrochemical sensor amplifiers, photodiode and optical measurement front ends, high-impedance transducers, precision current-to-voltage converters, and four-channel acquisition circuits. Each amplifier requires correct bypassing, stable feedback compensation, and an output stage that remains within its linear operating region during startup and overload conditions.

When laying out a sensitive measurement board, keep the input traces short, use guarding techniques for high-impedance nodes, and connect the power-supply pins to a low-impedance ground plane. For replacement work, verify the amplifier's temperature grade, supply range, offset-voltage behavior, unity-gain stability, and exact 16-lead pin arrangement before substituting a different quad amplifier.

This product page combines the manufacturer specifications, package information, sourcing details, functional comparisons, and practical design guidance to support component selection, PCB reuse, and qualification of the AD704AR-16 in precision analog systems.

Bộ thay thế dễ dàng lắp đặt cho AD704AR-16 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD704AR-16 (cùng hình factor và footprint) — khác nhau ở Amplifier Type, Number of Amplifiers, Package.

Analog Devices
Amplifier Type: Low-power bipolar operational amplifier
Number of Amplifiers: 4 amplifiers
Package: 16-SOIC
So sánh với AD704AR-16 →

AD704JR-16

✅ Drop-In
Analog Devices
📦 16-lead SOIC
4 amplifiers · Low-power bipolar operational amplifier · Superbeta bipolar input transistors · Picoampere level at room temperature · Typically 5× at 125°C

Liên hệ để biết giá

Xem tài liệu →

AD704BR-16

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-lead SOIC
AD704 family ordering variant differing in temperature-grade designation; electrical performance and pinout require datasheet confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

AD704CR-16

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-lead SOIC
AD704 family ordering variant with a different temperature-grade code and equivalent 16-lead bipolar precision-amplifier architecture

📋 Tham chiếu thay thế (không có trong danh mục)

AD704AR-32

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-lead SOIC
AD704 family ordering variant with different grade or performance code; verify gain-bandwidth, offset, drift, and temperature limits in the family datasheet

📋 Tham chiếu thay thế (không có trong danh mục)

OP497FSZ

✅ Drop-In
📦 16-lead SOIC
Cross-brand-style alternative within the same manufacturer portfolio; bias current, offset drift, bandwidth, supply current, and noise differ from the AD704

📋 Tham chiếu thay thế (không có trong danh mục)

AD704AR-16 Tỷ lệ tối đa & tính chất điện

Amplifier Type Quad precision operational amplifier
Number of Amplifiers 4
Cấu trúc Low-power bipolar precision op amp
Input Transistor Architecture Superbeta bipolar input transistors
Typical Input Bias Current Picoampere level at room temperature
Input Bias Current Temperature Behavior Typically increases by 5x at 125°C
Gain-Bandwidth Product 800 kHz
Điện áp cung cấp Approximately 1.5 mA per amplifier
Power Class Low power
Hộp 16-lead SOIC
Số chân 16
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân AD704AR-16 16-lead soic

Cấu hình chân cho AD704AR-16 (16-lead soic gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 16-lead soic cho AD704AR-16

Không có dữ liệu chân cụ thể sẵn có cho AD704AR-16.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD704AR-16 phù hợp cho 6 Áp dụngs: High-Impedance Sensor Front Ends, Photodiode Signal Conditioning, Precision Current-to-Voltage Conversion, Four-Channel Instrumentation Acquisition, Battery-Powered Portable Measurement, Precision Bridge and Strain-Gauge Readouts.

🧩

High-Impedance Sensor Front Ends

The AD704AR-16 fits electrochemical, pH, and resistive sensor interfaces because its superbeta bipolar input stage provides picoampere-class bias current at room temperature and typically only a fivefold increase at 125°C. Four amplifiers can process four sensor channels in one 16-lead SOIC, reducing board area. Keep sensor traces short, guard the input nodes, and verify that input bias current times source impedance remains below the required measurement error. The 800 kHz gain-bandwidth product supports low-frequency sensor signals, while approximately 1.5 mA per amplifier limits power consumption in portable instruments.

🎥

Photodiode Signal Conditioning

The AD704AR-16 is suitable for transimpedance photodiode amplifiers when the photodiode capacitance is modest and the required signal bandwidth is below the amplifier's 800 kHz gain-bandwidth product. Picoampere-class input bias current reduces the DC error generated across the feedback resistor, and the superbeta bipolar stage limits bias-current drift with temperature. Use low-value feedback resistors for wideband photodiode nodes and account for input capacitance when selecting the compensation network. The quad package can also combine photodiode, temperature, and reference-buffer channels.

⚡

Precision Current-to-Voltage Conversion

The AD704AR-16 can convert small currents from sensors, photoresistors, or electrochemical cells into measurable voltages while introducing less bias-current error than a conventional bipolar input stage. Its approximately 1.5 mA per-amplifier supply current makes it appropriate for portable and bench instrumentation, and its low temperature drift helps preserve accuracy in changing environments. The design must still account for the transimpedance resistor's thermal noise, input bias current flowing through that resistor, and the amplifier's input offset voltage. Stable reference and guard techniques improve end-to-end measurement quality.

🏭

Four-Channel Instrumentation Acquisition

A single AD704AR-16 package can condition four low-level analog inputs, making it useful for compact multi-channel measurement boards. Each amplifier combines picoampere-class input bias current with low power consumption of approximately 1.5 mA, while the 800 kHz gain-bandwidth product covers many pressure, temperature, strain, and process-control signals. Place bypass capacitors beside the supply pins and route each sensitive input away from digital and switching traces. Verify common-mode range and output swing at the actual signal level, especially during startup when sensors may present voltages outside the steady-state operating range.

📱

Battery-Powered Portable Measurement

The AD704AR-16 suits battery-powered instruments because its approximately 1.5 mA per-amplifier operating current limits supply demand while retaining picoampere-class input bias current. Four precision channels fit into one 16-lead SOIC, allowing a compact analog front end in handheld analyzers, environmental monitors, and field meters. The superbeta bipolar input stage also limits bias-current growth at elevated temperature, which matters when the enclosure warms during operation. Validate the total board sleep current, regulator efficiency, and analog settling behavior rather than evaluating the amplifier alone.

🏗️

Precision Bridge and Strain-Gauge Readouts

The AD704AR-16 can amplify outputs from resistive bridges and strain gauges where source impedance is high and drift directly affects measurement accuracy. Picoampere-class input bias current reduces excitation error, while controlled bias-current temperature behavior helps preserve bridge balance over changing conditions. The 800 kHz gain-bandwidth product is adequate for many quasi-static and low-frequency mechanical measurements. Use matched resistors, low-drift reference components, careful grounding, and guarded sensor connections. Offset voltage and offset drift must be checked against the resolution required by the mechanical test system.

What is the AD704AR-16?
The AD704AR-16 is a quad, low-power bipolar precision operational amplifier from Analog Devices, packaged in a 16-lead SOIC. According to the Analog Devices AD704 product page, it uses superbeta bipolar input transistors to achieve picoampere-level input bias current at room temperature. The device provides four amplifiers, an 800 kHz gain-bandwidth product, and approximately 1.5 mA supply current per amplifier.
Why is the AD704AR-16 input bias current important?
Low input bias current is important because it minimizes the error produced when the amplifier drives a high-impedance sensor. The AD704 uses superbeta bipolar input transistors to reach picoampere-class bias current at room temperature. Analog Devices also states that its bias current typically increases by only about five times at 125°C, helping the amplifier maintain accuracy in elevated-temperature measurement systems.
What is the difference between bipolar and BiFET input stages?
The AD704AR-16 uses bipolar input transistors, while a BiFET amplifier uses field-effect transistors at its input. Both approaches can provide low input bias current, but the AD704's superbeta bipolar stage is designed to limit bias-current drift over temperature. Analog Devices specifically highlights this behavior because drifting input current can create a significant error across a high-value sensor impedance.
What are the main specifications of AD704AR-16?
The principal AD704AR-16 specifications are four amplifiers per package, an 800 kHz gain-bandwidth product, approximately 1.5 mA supply current per amplifier, picoampere-class room-temperature input bias current, and a 16-lead SOIC package. The Analog Devices product page identifies it as a low-power bipolar precision amplifier with superbeta input transistors.
Where can I download the AD704AR-16 datasheet PDF?
The official AD704 product information is available from Analog Devices at https://www.analog.com/en/products/ad704.html, where the manufacturer provides the AD704 family data sheet and product documentation. The manufacturer page should be the primary reference for the complete electrical characteristics, temperature ranges, package drawings, and pin descriptions of the AD704AR-16.
Where can I find the AD704AR-16 pinout?
The AD704AR-16 pin arrangement is defined in the pin-configuration table of the Analog Devices AD704 family datasheet. It is a 16-lead SOIC containing four operational amplifiers. Use the manufacturer pin table when assigning input, output, positive-supply, and negative-supply nets, because equivalent quad amplifiers can use different pin assignments even when their lead counts match.
Is the AD704AR-16 suitable for high-impedance sensors?
Yes, the AD704AR-16 is suitable for many high-impedance sensor front ends because its superbeta bipolar input stage provides picoampere-level bias current at room temperature and relatively low bias-current drift. It is commonly considered for electrochemical, pH, photodiode, and precision transducer interfaces. The complete signal path must still account for resistor leakage, guarding, board contamination, and input capacitance.
Can AD704AR-16 be used in a four-channel sensor acquisition circuit?
The AD704AR-16 can be used in a four-channel acquisition circuit because it contains four amplifiers in one 16-lead SOIC. Its 800 kHz gain-bandwidth product suits low-to-moderate-frequency precision signals, and the approximately 1.5 mA per-amplifier current supports low-power designs. Common-mode range, output swing, and channel-to-channel matching must be checked for the selected sensor interface.
What is the best drop-in replacement for AD704AR-16?
The closest drop-in replacement depends on whether temperature grade or supply behavior matters more than exact offset and drift characteristics. AD704 family members such as AD704BR-16 and AD704CR-16 retain the same 16-lead SOIC architecture and precision bipolar input concept, while AD704JR-16 is a documented family alternative. Confirm the manufacturer pin table, electrical limits, and temperature grade before approving any substitution.
Can AD704JR-16 replace AD704AR-16?
AD704JR-16 is a documented AD704 family comparison part and uses the same 16-lead SOIC architecture, so it is a candidate for AD704AR-16 replacement. The two designations represent different ordering variants, and the correct choice depends on the required temperature grade and operating conditions. Verify offset voltage, drift, supply range, and qualification requirements against the AD704 family datasheet.
AD704AR-16 vs AD704JR-16: which is better for precision measurement?
Choose between AD704AR-16 and AD704JR-16 by matching the ordering temperature grade to the measurement environment rather than by headline speed or power. Both are precision bipolar quad amplifiers in the AD704 family, and both target low input bias current with limited temperature drift. The exact ordering-code definitions in the manufacturer datasheet determine which grade best fits industrial, extended, or automotive requirements.
When should I choose AD704AR-16 instead of a BiFET precision amplifier?
Choose AD704AR-16 when picoampere-class room-temperature input bias current, low power, and controlled bias-current temperature drift are the dominant requirements. A BiFET precision amplifier may be appropriate when its specific noise, offset, or common-mode behavior is better, but users should compare actual bias-current drift rather than relying only on the room-temperature figure. The AD704 is particularly relevant to high-source-impedance sensors.
Is OP497FSZ a drop-in alternative to AD704AR-16?
OP497FSZ is a cross-brand quad precision amplifier candidate in a 16-lead package, but it should be treated as a candidate rather than an automatic substitution. The OP497 family differs from the AD704 in bias-current behavior, offset voltage, drift, bandwidth, supply current, and noise. Verify the exact package lead layout and every critical parameter in the OP497 and AD704 datasheets before approving a drop-in replacement.
How should I decouple and lay out an AD704AR-16 circuit?
Place the power-supply bypass capacitors directly beside the amplifier's supply and ground pins, and route those connections through the shortest practical paths on a low-impedance ground plane. Keep high-impedance input nodes short, use guarding where leakage matters, and avoid routing sensitive inputs beside switching nodes. Follow the layout and decoupling recommendations in the Analog Devices AD704 datasheet for the final board.
Where can I buy AD704AR-16 and check current lead time?
Use the Request a Quote form on this page to ask for AD704AR-16 availability, current lead time, and order quantity requirements. The part is a 16-lead SOIC quad precision amplifier from Analog Devices, and its exact commercial status should be confirmed for the requested quantity and packaging before releasing a production order.

Dữ liệu tham khảo kỹ thuật cho AD704AR-16 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose AD704AR-16 when the signal source has high impedance and measurement accuracy is more sensitive to input bias current and temperature drift than to wide bandwidth. Its four channels, 800 kHz gain-bandwidth product, and approximately 1.5 mA per-amplifier supply current suit low-frequency precision instrumentation, electrochemical sensors, photodiode interfaces, and portable measurement systems. AD704JR-16 is a reasonable first candidate when the required ordering temperature grade differs, while AD704BR-16 and AD704CR-16 should be selected only after their grade definitions and electrical limits are confirmed in the family datasheet. OP497FSZ should be evaluated when its offset, noise, bandwidth, and power characteristics provide a better overall fit, but it should not be assumed to match the AD704's bias-current behavior. For every substitution, verify the 16-lead pin mapping, common-mode range, output swing, offset drift, bias current, and operating temperature grade.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD704JR-16 AD704BR-16 AD704CR-16 AD704AR-32 OP497FSZ
Package 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Count 4 4 4 4 4 4
Primary Function Precision low-bias-current amplifier Precision low-bias-current amplifier Precision low-bias-current amplifier Precision low-bias-current amplifier Precision amplifier Precision amplifier

Bảo phân biệt quan trọng

  • Picoampere-class room-temperature input bias current with controlled temperature behavior (vsOP497FSZ)
  • Low-power operation in a four-channel package (vsAD704JR-16)
  • Superbeta bipolar input architecture (vsOP497FSZ)
  • Four precision channels in a compact standard footprint (vsLM2904M/NOPB)

Ghi chú thiết kế

Connect the AD704AR-16 bypass capacitor directly between the supply and ground pins, and place it on the same side of the board as the device. Keep input and feedback traces short and route them away from switching-regulator and digital clock traces. High-impedance input nodes should be guarded with a resistor connected to a low-impedance bias or ground point where circuit polarity permits. These measures reduce leakage pickup and parasitic capacitance that are especially significant when the source impedance is high.

Do not select a replacement solely by matching the amplifier count and SOIC lead count. Verify the exact pin mapping, supply range, input common-mode range, output swing, offset voltage, offset drift, input bias current, unity-gain stability, and temperature grade. The AD704AR-16 emphasizes picoampere-class input bias current, so a generic quad amplifier can create a major error at the same source impedance even when its headline bandwidth specification appears suitable.

For a transimpedance design, calculate the feedback network around the actual photodiode or sensor capacitance rather than relying only on the nominal 800 kHz gain-bandwidth product. A feedback resistor that is too large combined with input capacitance can reduce bandwidth and stability margin. Check settling behavior, output saturation during startup, and bias-current-generated DC error. Precision measurements also benefit from low-drift resistors and a clean analog ground connection.

The AD704AR-16 is a low-power device, but precision accuracy still depends on temperature gradients rather than total package power alone. Keep sensitive feedback resistors and sensor connectors away from regulators, processors, and other heat sources. Use the device's specified bias-current temperature behavior as part of the error budget, and include input offset-voltage drift and sensor drift when estimating measurement uncertainty over the complete operating range.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The AD704 is a conventional analog precision amplifier, and no automotive qualification is indicated for the AD704AR-16 ordering code. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or a certification statement.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD704AR-16 datasheet AD704AR-16 datasheet pdf AD704AR-16 pinout AD704AR-16 specifications AD704AR-16 16-SOIC AD704AR-16 equivalent AD704AR-16 replacement AD704AR-16 vs AD704JR-16 AD704AR-16 vs OP497FSZ Analog Devices AD704AR-16 AD704AR-16 input bias current AD704AR-16 sensor amplifier AD704AR-16 price AD704AR-16 stock AD704AR-16 lead time

Các bộ phận và thuật ngữ liên quan

Analog Devices AD704AR-16 AD704 AD704JR-16 AD704BR-16 AD704CR-16 AD704AR-32 OP497FSZ quad operational amplifier precision amplifier bipolar operational amplifier superbeta input transistor input bias current input offset voltage gain-bandwidth product 800 kHz picoampere input current BiFET amplifier 16-lead SOIC surface-mount package high-impedance sensor electrochemical sensor photodiode amplifier current-to-voltage converter industrial instrumentation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ